To become certified, you must take a board exam administered by the Association of Registered X-Ray Technicians. Once you pass the test, you can apply for certification through the Pennsylvania State Bureau of Professional and Occupational Affairs.
How do I become a radiologic technologist in Pennsylvania?
Pennsylvania radiologic technologists are required to carry a state license in order to practice in the field. To become certified and earn their license, working radiologic technologists may either pass the state certification exam or, like 36 other states, pass the American Registry of Radiologic Technologists (ARRT) certification exam.
How do I become a certified X-ray technician?
You'll need a CPR certification and a high school diploma or GED to qualify for a CDA program. Once you’ve achieved certification, you are ready to get to work taking x-rays. Remember to take a minimum of 12 education credits every year to ensure renewal of your certification. Get Ahead With Training
How much does Radiology School cost in PA?
3550 Seventh Street Road, New Kensington PA 15068 Tel: (724) 334-6738 Program Name: Radiological Sciences Program Type: Associate in Radiologic Sciences Duration: 72 months Program Effectiveness: Completion Rate: 70% Credential Examination Pass Rate: 92% Job Placement Rate: 90% Tuition Fees: $14,412 Resident, $24,468 Non-resident.
Is radiology a good career in Pennsylvania?
Keep in mind also that Pennsylvania boasts very high employment rates for this profession, offering resident radiology professionals with many varied employment opportunities. More information on Rad Tech salaries in Pennsylvania.
How often do you have to inspect a radiation facility?
What is the state regulation for radiation producing machines?
When is a medical report required for radiation therapy?
Do radiation producing machines need to register?
See 1 more
About this website
How do I get my xray certification in PA?
An applicant must pass one of the following examinations to satisfy licensure requirements:ARRT Examination in Radiography.ARRT Examination in Radiation Therapy Technology.ARRT Examination in Nuclear Medicine Technology.ARRT Limited Examination in Radiography.ARRT Limited Examination in Radiography—Skull and Sinuses.
How long does it take to become an Xray Tech in PA?
two yearsThese programs are two years long and include laboratory work, classroom learning and clinical training with an experienced radiographer. Some of the subjects you'll study include medical terminology, medical law, anatomy and physiology, and general education coursework is also included.
How much does a xray tech make in PA?
$37,435 is the 25th percentile. Salaries below this are outliers. $55,927 is the 75th percentile.
Are X rays regulated?
Individual states and other federal agencies regulate the use of the X-ray imaging devices through recommendations and requirements for personnel qualifications, quality assurance and quality control programs, and facility accreditation.
Where can I go to school to be an Xray Tech?
Best Value Radiologic Technology Schools with On-Campus ProgramsSchool2- or 4-Year SchoolRetention Rate*1Mitchell Technical Institute2-year (public)81%Ball State University4-year (public)78%Maine College of Health Professions4-year (private)83%Cleveland University-Kansas City4-year (private)50%8 more rows
How many years does it take to study radiography?
Three yearsMinimum duration: Three years.
How much do Xray techs make an hour in PA?
Salaries by years of experience in PennsylvaniaYears of experiencePer hour1 to 2 years$27.233 to 5 years-6 to 9 years$32.15More than 10 years$35.321 more row•Sep 13, 2022
Where do Xray techs make the most money?
CaliforniaThe states and districts that pay Radiologic Technologists the highest mean salary are California ($95,010), Hawaii ($82,990), District of Columbia ($82,270), Alaska ($79,330), and Massachusetts ($78,830). How Much Do Radiologic Technologists Make in Your City?
What is the highest-paying occupation?
The highest-paying job in the world, in a traditional sense, holds the number one spot in this article: anesthesiologist. They are also the only job listed above $300,000 a year.
How often is radiation training required?
Radiation safety for users of radioactive materials At a minimum, refresher training is required annually and as needed. Complete the online course, Radiation Safety for Users of Radioactive Materials - Online.
Does OSHA cover radiation?
OSHA requires employers to protect workers from exposure to ionizing radiation sources that are not regulated by the NRC or other federal agencies, such as X-ray equipment, some accelerators, incidental accelerator-produced radioactive materials, ion implanters, and some naturally-occurring radioactive material (NORM).
What do radiology techs do?
Radiologic technologists specialize in x-ray and computed tomography (CT) imaging. Radiologic technologists, also known as radiographers, perform x rays and other diagnostic imaging examinations on patients. MRI technologists operate magnetic resonance imaging (MRI) scanners to create diagnostic images.
What are radiological procedures?
The most common types of diagnostic radiology exams include: Computed tomography (CT), also known as a computerized axial tomography (CAT) scan, including CT angiography. Fluoroscopy, including upper GI and barium enema. Magnetic resonance imaging (MRI) and magnetic resonance angiography (MRA) Mammography.
How do I become an Xray Tech in Texas?
General or Limited CertificateQualify for and hold a temporary certificate.Graduate from an accredited education program in radiologic technology or an approved limited medical radiologic technology program Pass an examination approved by the Texas Department of State Health Services.
Registration and Fee Schedule - Department of Environmental Protection
Registration and Fee Schedule . A registration is required for any person or entity possessing a radiation-producing machine. Registering with the department is required within 30 days of acquisition of the machine.
Continuing Education Requirements - Department of Environmental Protection
Continuing Education Requirements. Any individual who operates an X-ray machine shall be instructed adequately in the safe operating procedures and be competent in the safe use of the equipment.
Pennsylvania Requirements for the Safe Use of Medical Fluoroscopy ...
Per Commonwealth of Pennsylvania, Environmental Protection Standards, Title 25, Section 221.16, it is the responsibility of the X-ray registrant to ensure that the individual who operates an X-ray system is adequately trained in the safe use of the equipment.
A Walsh Imaging | X-ray Equipment Disposal
A Walsh Imaging provides medical and veterinary facilities throughout New Jersey, New York, Connecticut and Pennsylvania with professional x-ray equipment disposal.
NJDEP- Bureau of X-Ray Compliance - State
New Jersey Department of Environmental Protection-Radiation Protection Element
How often do you have to inspect a radiation facility?
In order to ensure that patients, personnel and the environment are protected, that operators are properly trained, and radiation equipment and facilities meet current protection standards, the department has a goal to routinely inspect all facilities at least once every four years or as necessary to ascertain compliance or non-compliance with applicable regulations. Major facilities may be inspected every two to three years. In all, this results in a total of approximately 2,800 routine inspections per year statewide.
What is the state regulation for radiation producing machines?
State regulations require that a licensee or registrant possessing a radiation-producing machine report to DEP's Bureau of Radiation Protection all medical reportable events that occur during therapeutic use.
When is a medical report required for radiation therapy?
Other medical reports are also required when therapeutic or diagnostic use of a radiation-producing machine results in, or is the suspected cause of, an injury that was not an expected consequence when the procedure began. Injury is considered any condition that warrants medical intervention.
Do radiation producing machines need to register?
Users of radiation-producing machines are required to register with the division, to indicate the number and type of units possessed and to designate an individual to be responsible for radiation safety. Users pay registration fees based on the type of facility and the number of tubes possessed.
Degree Requirement
Associate's Degree The applicant must receive an Associate's Degree from an American Registry of Radiologic Technologists (ARRT)approved educational program.
Examination Requirement
1 Examination An applicant must pass one of the following examinations to satisfy licensure requirements:
Experience
National Certification To verify that an applicant has passed one of the approved examinations and is certified, the individual must provide documentation of certification from one of the following organizations:
Continuing Education
24 Hours 24 hours of continuing education required for licensure renewal.
Licensure By Act 41
Act 41 allows for portability of out-of-state professional licensees coming to work in Pennsylvania.
How many schools are there for radiology in Pennsylvania?
Well-Known Schools for Radiology in Pennsylvania. In the state of Pennsylvania, aspiring radiologic technologists have many education programs to choose from, including joint hospital certificate programs and 2- and 4-year colleges and universities. There are currently 38 institutions with radiography programs that have earned their accreditation ...
How many radiologists are employed in Pennsylvania?
In May 2019, the state of Pennsylvania was home to around 10,150 employed radiological technology professionals, making it one of the top-hiring states in the nation, according to the Bureau of Labor Statistics.
How much does a radiologic tech make in Pennsylvania?
According to the same source, radiologic technologists working in Pennsylvania earned an average of $52,880 annually in 2019, with an average hourly wage of $25.43. Employment conditions in your area my vary.
Do you need a license to become a radiologic tech in Pennsylvania?
To become certified and earn their license, working radiologic technologists may either pass the state certification exam or, like 36 other states, pass the American Registry of Radiologic Technologists (ARRT) certification exam. No license renewal is required to date, and continuing education is not mandatory in this state.
How long does it take to register a radiation machine?
A registration is required for any person or entity possessing a radiation-producing machine. Registering with the department is required within 30 days of acquisition of the machine. Users pay registration fees based on the type of facility and the number of tubes possessed.
Can a certificate of registration be transferred?
A certificate of registration may not be transferred or assigned to any person or entity without a written request and subsequent approval by the department. Current registrants are required to renew their registration each year and verify the number and type of machines they possess.
How long does it take to get a dental radiology certification?
More education will ultimately make you more prepared and more successful in your career. You can be completed in as few as 10 months. Afterward, your dental radiology certification will help you land a stable career in a growing industry.
What Certifications Can I Get?
The majority of x-ray technicians complete their Radiation Health and Safety (RHS) certification. The exam will focus on anatomy, radiography facts, and safety procedures. The Dental Assisting National Board (DANB) is the accrediting institution.
What is the job of a radiography technician?
Most radiography technicians have other duties than x-rays alone. Usually, you will work as a dental assistant or hygienist and do x-rays as part of your daily tasks. Some states will let you begin work in an office as a dental assistant without any formal training.
Who administers the state licensing exam?
If you already know that ARRT administers your state’s licensing exam, learn more about applying for and scheduling your state exam.
Do you need a license to be a radiologic technologist?
More than 75% of states have licensing laws covering the practice of radiologic technology. In those states, you must obtain a state license before you can work as a radiologic technologist. In addition, many states use ARRT exam scores and/or credentials when making licensing decisions.
Does ARRT administer licensure exams?
Many states that require licensure for technologists ask ARRT to administer our exams for their licensing purposes. We offer such exams in:
What is ARRT certification?
A RECOGNITION OF YOUR QUALIFICATIONS. The purpose of ARRT certification and registration is to recognize individuals qualified to perform a specific role. For example, the purpose of our Radiography certification and registration is to recognize individuals who are qualified to perform the role of a radiographer.
How many technologists hold ARRT certification?
Currently more than 330,000 technologists hold ARRT credentials. By earning ARRT certification and registration, you'll be joining the ranks of these qualified professionals.
Board Examination Information
Note: This mailbox is reserved for receipt of documentation specific to letters of good standing, exam information, disciplinary documents, transcripts and other education or employment verifications, and any other outside agency or related communications.
Contact
Note: This mailbox is reserved for receipt of documentation specific to letters of good standing, exam information, disciplinary documents, transcripts and other education or employment verifications, and any other outside agency or related communications.
How often do you have to inspect a radiation facility?
In order to ensure that patients, personnel and the environment are protected, that operators are properly trained, and radiation equipment and facilities meet current protection standards, the department has a goal to routinely inspect all facilities at least once every four years or as necessary to ascertain compliance or non-compliance with applicable regulations. Major facilities may be inspected every two to three years. In all, this results in a total of approximately 2,800 routine inspections per year statewide.
What is the state regulation for radiation producing machines?
State regulations require that a licensee or registrant possessing a radiation-producing machine report to DEP's Bureau of Radiation Protection all medical reportable events that occur during therapeutic use.
When is a medical report required for radiation therapy?
Other medical reports are also required when therapeutic or diagnostic use of a radiation-producing machine results in, or is the suspected cause of, an injury that was not an expected consequence when the procedure began. Injury is considered any condition that warrants medical intervention.
Do radiation producing machines need to register?
Users of radiation-producing machines are required to register with the division, to indicate the number and type of units possessed and to designate an individual to be responsible for radiation safety. Users pay registration fees based on the type of facility and the number of tubes possessed.
