how do i hide the cables from my wall mounted tv

• Run speaker wires under the carpet on wall edges. One sneaky and inexpensive way to hang a tv without wires showing is to slip cords underneath the carpet.
• Use cable ties and hide wires behind furniture. You can make use of your furniture to hide cords on a wall-mounted tv without drilling. ...
• Use a cable tunnel or track and elbow connectors. Use cable tunnels to hang tv on the wall without wires showing. ...
• Installing a wall cable track. Measure the wall between the floor and the base of the screen. ...

Full Answer

How do you hide a TV wire behind a wall?

You'll use on-wall cable raceways which means no cutting into your wall, but you'll still be able to see the cable channels. The second method is a little more involved but still pretty damn simple. You'll route cables behind your wall for the ultimate in TV wire concealment.

Can You mount a TV on the wall?

When wall mounting a TV, you can use this ‘gap’ to hide your cables within. Ideally this is located next to a wall stud, not only for stability but you will also find it easier to pass the cables down at this point as the insulation will not be so packed in.

How do I hide power cords in the wall?

I have a two ideas for you. One requires a drill and a cord kit. This is the best way. If you are in a rental home or apartment and can’t drill into the wall, the other cord hiding idea I am sharing uses fabric and is easily made and removed.

What do you need to hang a TV without wires showing?

The only additional ones you’ll need are a keyhole saw and wire cutters. One sneaky and inexpensive way to hang a tv without wires showing is to slip cords underneath the carpet.

How can I hide the cables behind my TV?

Wrangle your cords with cable ties. ... Label your cables. ... Buy new (shorter) cables. ... Install new power sockets or HDMI ports behind the TV. ... Conceal TV cords in a cable raceway. ... Hide surround speaker wires by skirting the floor molding or laying down a rug. ... Mount your power strip to get cables off the floor.

How do you hide the cords on a wall-mounted TV without cutting the wall?

0:000:55How to Hide TV Cables Without Cutting the Wall - YouTubeYouTubeStart of suggested clipEnd of suggested clipHold it up to the wall find your cable. Make sure it's clipped into place. And attach it to the wallMoreHold it up to the wall find your cable. Make sure it's clipped into place. And attach it to the wall. You can also paint this the exact same color as your wall. So your cables virtually disappear.

How much does it cost to mount a TV and hide wires?

Cost to Mount TV and Hide Wires Mounting a TV and hiding the wires in the wall could run upwards of $1,000 or more. If you opt for cable covers that adhere to the wall, you won't pay nearly as much. These kits run from $10 to $40 for materials only, not counting labor.

What Comes In the TV Cord Hiding Kit?

Corrugated plastic tube with connected outlets, cover, long extension cord, hole saw bit for a power drill, wire snake, paper template

How to place plugs in wall outlet?

When you decide where to place the holes in the wall you should get the lower one as close to an existing wall outlet as possible. After the tube and cords are pulled out of the bottom hole, depending on how close a wall outlet is , you simply plug the plugs into the wall outlet . The wall outlet in my room was low on the wall and is hidden by the table.

What is the top outlet on a TV?

The top outlet has a power plug. This is where you plug in the TV. The kit has a power cable that you need to then plug into an existing wall electrical outlet that is low on the wall. (I placed a piece of furniture in front of this outlet so it is hidden from view, but still easy to get to if needed.)

Can you plug in a power strip with more than two outlets?

If you have more than two plugs, (normal outlet) you can plug in a multi-outlet power strip. I have this on the table.

Do TV cord hiding kits have flexible tubes?

Update: Most newer TV cord hiding kits being sold today, do not have a flexible tube to hold the wires anymore. If you have a lot of cables and wires hooked up to your TV make sure to look for a kit that has larger holes for the cables and wires to go in and out of easily.

How to hide cable TV?

The first is super easy and doesn't require many (if any) tools. You'll use on-wall cable raceways which means no cutting into your wall, but you'll still be able to see the cable channels. The second method is a little more involved but still pretty damn simple.

How to minimize snags on wire?

Protip: minimize snags by folding the last 3 inches of the wire back on itself and tape it down. The smooth edge is much easier to feed through insulation. Once all your cables are through the bottom hole, pop on the covers and you're done. Painting them to blend in is up to you.

How many cable channels are there in a raceway?

There are 3 cable channels that are each 48", and various connectors to handle any turn, corner, or cable intersection. Want to know the best part? Baby got adhesive back (bad Sir Mixalot pun). These have an adhesive back that sticks right to the wall. You can leave the screwdriver in the toolbox.

How long is the cable tunnel in Danny DeVito?

This cable tunnel is 48" long, which is 80% of one Danny DeVito. Need it to be shorter? Bust out that hand saw you were saving for the zombie apocalypse and customize the channel length to your setup. Want to know the best part? It's made in America. F yeah!

Can you cover wires from a TV?

If you just need to cover wires from your TV straight down to an outlet, a single on-wall cable channel will do the trick. It pairs perfectly with a mounted TV and is easy to install. All you'll need is a screwdriver. It's got a large cable capacity so it shouldn't have any issues hiding all your cords.

Can you put wires down the wall?

Depending on your setup, you probably can use some household items to get wires down the wall. You'll want something stiff enough to push past insulation, but not so inflexible that it can't be fed into the wall. If you have an extra wire hanger or use any thick wire around the house you can unravel it to make a simple wire fishing stick.

Can you put cables behind drywall?

As your home AV (and experimental fast food) experts, we recommend putting your cables behind the drywall. It isn't hard to do and can turn your TV setup from an eyesore to a dime piece. Having cables exposed is like your late-night karaoke singing, and hiding them is like auto-tune. It just makes everything better.

How to hide TV cords without cutting the wall?

1. Make a Wood Frame and Cover It in Fabric. It’s a creative way to hide TV cords without cutting the wall, however, you have to choose the fabric wisely. You want it to fit the wall color and the furniture in the room.

Where do the wires go on a wall mounted TV?

All the TV wires go behind the frame and remain hidden but, if necessary, they’re easily accessible. Wall mounted TV cable management at its best.

How to mount wires to wall?

Before mounting the wires, draw an outline on the wall with a pencil that can be erased easily. Measure the length of the cords (you can easily do that with a string) and plan the artwork accordingly. You can mount the wires to the wall with wall clips or mounting tape.

Why do I hide TV wires in my living room?

The main reason I decided to organize and hide TV wires in my living room was that I simply didn’t like the way they looked. They were ugly.

What happens if you don't have a TV stand?

If you don’t have your TV mounted on the wall and you use a standard TV stand, chances are great that there’s a jungle of wires behind the stand. To organize and hide the cluttered cords, first, you have to shorten each of them individually to the length you need.

What are the disadvantages of using a cable trim?

Its major disadvantage is that the cables are not so easy to access under the trim work if you need to remove or add one in the future. That’s why I only recommend this method if you’re willing to spend some time disassembling the trim work each time you add or remove a new device to your TV set (or if you don’t want to change your set anytime soon).

How to cover cords on TV?

Place some home decoration items, picture frames, plants or books under the TV and position them so that they cover the cords. Make sure you don’t just put the items randomly below the TV. They should look natural and blend in the environment. That’s all.

TV Wall Mount: how to hide cables in a stud wall

Most modern homes now use plasterboard sheets to construct internal walls that are attached to a timber frame, otherwise known as stud partitioning. This construction technique leaves a space in-between, which is sometimes filled with insulation to keep the room energy efficient.

TV Wall Mounting: 12 Steps to hiding your cables

Select where your TV wall bracket is to be hung Ideally this is located next to a wall stud, not only for stability but you will also find it easier to pass the cables down at this point as the insulation will not be so packed in. (See our guide for the best height for wall mounting your TV)

Not got a stud wall?

Check back in a few weeks and we’ll explain our best advice on making wall mounted TV’s presentable on solid walls.