Install the New Kitchen Faucet
- Set the Deck Plate. Place the rubber or plastic gasket, or trim ring, over the faucet holes in the sink and set the deck plate.
- Feed in the Lines
- Affix the Hardware Under the Sink
- Set Up the Pull-Down Faucet
- Connect the Lines
- Check for Leaks
- Clear the Lines
- Replace the Aerator
How do I install a new kitchen faucet?
Installing a Faucet in 3 Simple Steps
- Install the sink gasket. Before a new faucet is attached, a seal is needed between the faucet and the sink. ...
- Position the faucet in the holes. Attaching the faucet to the sink is pretty easy. ...
- Connect the faucet to the water lines.
How to install or replace a kitchen faucet?
Part 2 Part 2 of 3: Putting in the New Faucet Download Article
- Assemble the new faucet if needed. Choose a new faucet that matches the style of your old faucet. ...
- Cover any additional holes in your sink with trim rings or a deck plate. Some sinks will have multiple holes to accommodate different types of faucets.
- Feed the supply tubes into the hole and position the new faucet. ...
How to install Premier kitchen faucet?
supply lines
- Before installing a new kitchen faucet, be sure to go underneath your kitchen sink and check how many holes your existing sink uses. ...
- Since much of the job will be done on your back, a pillow will make the work easier to bear. ...
- Clear out all of the products and supplies under the sink.
Can I install a kitchen faucet myself?
Yes, You Can Install a Kitchen Faucet Yourself If you've hung around Chatfield Court at all then you know that we're all about DIY, there's nothing that we won't tackle ourselves. Some of the projects that we've done were more advanced, like the granite countertops we installed in our last house, but most are easy enough that anyone can do them.
Can I replace a kitchen faucet myself?
You can replace a faucet yourself without having to hire a plumber. It should take you less than an hour with a few basic tools, such as a basin wrench. The same techniques apply to both kitchen and bathroom faucets.
Can I install a new faucet myself?
Fortunately, modern plumbing and faucet design have made changing faucets easy. It's a quick day project that makes a significant difference to the look of your space, and you can save lots of money by skipping the plumber and doing it yourself.
How do you remove an old kitchen faucet and install a new one?
0:281:25How to Remove a Kitchen Faucet | Plumbing | The Home DepotYouTubeStart of suggested clipEnd of suggested clipYou. May need to spray penetrating oil on the mounting nuts that secure the faucet to the sink. WaitMoreYou. May need to spray penetrating oil on the mounting nuts that secure the faucet to the sink. Wait about 15 minutes then turn the nuts counterclockwise to remove them.
How difficult install kitchen faucet?
With a few common tools, it's easy to install or replace a kitchen faucet....Removing the existing faucet isn't difficult, but you'll need a basin wrench and an extra set of hands.Step 1: Turn Off the Water and Electric. ... Step 2: Take a Picture. ... Step 3: Disconnect the Supply Lines.More items...
How much is Lowes kitchen faucet installation?
Lowe's faucet installation costs $92 and up, depending on the location. Lowe's includes a 1-year labor warranty and removes and disposes of your old faucet. Lowe's only installs kitchen and bathroom sink faucets.
How do you remove an old kitchen sink faucet?
1:103:06How to Remove a Kitchen Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse the adjustable wrench to unscrew the connections by turning them counterclockwise. OnceMoreUse the adjustable wrench to unscrew the connections by turning them counterclockwise. Once everything is loose you can do the rest of it by hand next depending on the type of faucet you are removing.
What tools do I need to replace a kitchen faucet?
Tools and Supplies for Removing a Kitchen Faucet Removing a kitchen faucet requires two must-have tools: a basin wrench and an adjustable wrench. Use the adjustable wrench to give you the leverage you need. Unscrew the nuts and disconnect the water supply lines. The basin wrench is designed to work in tight spaces.
How do you replace a two handle sink faucet?
1:2512:07How to Replace a Kitchen Faucet with Two Handles | The Home DepotYouTubeStart of suggested clipEnd of suggested clipUse an adjustable wrench to remove each nut by turning it counterclockwise. As you do make sure youMoreUse an adjustable wrench to remove each nut by turning it counterclockwise. As you do make sure you stabilize the water pipe while you loosen the supply lines otherwise.
What are the different types of kitchen faucets?
A. The Main Types of Kitchen FaucetsThe Pull Down Faucet. Source: amazon.com. ... The Pull-Out Faucet. Source: faucetsuperdeal.com. ... The Single-Handle Faucet. Source: faucetdepot.com. ... The Dual-Handle Faucet. ... The Commercial Style Faucet. ... The Separate Spray Faucet. ... The Pot Filler Faucet. ... The Motion Detection Faucet.
How long should it take a plumber to replace a kitchen faucet?
The length of time required to replace a kitchen faucet will depend on the specific tasks involved. For simple replacements, it'll usually take between 30 minutes and an hour for a plumber to replace a kitchen faucet.
Are kitchen faucets universal?
Kitchen faucets are not universal. There may be limited space between the wall and the sink. There may be a clearance limitation with cabinets above the sink. The layout of the sink, cabinetry, and available counter space all need to be taken into consideration.
Do I need to remove garbage disposal to replace faucet?
Remove the old faucet If the garbage disposal is blocking access underneath the sink, you'll need to turn off power at the circuit breaker to the unit and unplug it before disconnecting.
Do you have to use plumbers putty when installing a new faucet?
If you're installing a faucet, it may be necessary, but you also might not need it. The reason being is that some faucets come with a rubber or plastic gasket or trim ring near the faucet deck plate that fits over the faucet holes in the sink. In that case, plumber's putty isn't completely necessary but doesn't hurt.
How much does it cost to install a faucet?
The price to install a bathroom or kitchen faucet can range between $162 and $363, with an average cost of $260. Faucet installation costs can be as low as $50 with the most basic options and DIY installation, but prices can climb to more than $4,600 for the most luxurious units and complex projects.
How do I install a new bathroom faucet?
1:075:37How to Install a Bathroom Faucet | A DIY Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipApply a small bead of plumbers putty around the base of the spout assembly. And insert the spoutMoreApply a small bead of plumbers putty around the base of the spout assembly. And insert the spout assembly. Into the center hole of the sink. Mount. It in place with the included hardware kit.
How much does it cost to replace a bathroom faucet?
Cost to Replace a Bathroom Faucet Replacing a bathroom faucet cost an average of $130 to $350 for just the labor. Whereas, you can expect to spend between $230 and $680 for the new faucet, all the necessary materials, and the installation.
How to get water out of a faucet?
Turn on your existing faucet to relieve any water pressure. After turning off the valves, lift or turn the handles to your existing faucet to clear out any water that may still be trapped in the pipes. Keep the faucet on so there isn’t a buildup of pressure in your valves.
What to do if you don't feel comfortable replacing a faucet?
If you don’t feel comfortable replacing a faucet or are confused by any of the pipes under your sink, contact a plumber to come do the job for you.
How to clean a faucet that has 2 handles?
3. Turn on your faucet and let the water run for 2-3 minutes. Lift or turn the handles on your faucet so the water runs out. Keep the faucet on for a few minutes so any debris or dust inside gets flushed out. If your faucet has 2 handles, turn both of them on to clear out all of the lines.
Why do you keep the faucet on?
Keep the faucet on so there isn’t a buildup of pressure in your valves.
How many holes does a faucet need?
Faucets with 2 handles usually have a 3-hole setup, while those with a single handle only require 1 hole.
How to loosen a sink nut?
A basin wrench is a long-handled tool that makes it easier to reach underneath your sink. Adjust the length of the wrench handle and place the jaws of the wrench around the nut underneath your faucet. Grab the nut from the left side and turn the wrench counterclockwise to loosen it completely.
How many water valves does a sink have?
Depending on your sink, you may have 1 or 2 water valves.
Prepare for the New Kitchen Sink
Before you begin this project, read the manufacturer’s instructions and follow all local building codes.
Remove the Old Sink
Before you begin, take a picture of your plumbing configuration. This will serve as a handy reference if you have trouble reassembling the plumbing later.
How to Install a Kitchen Sink
Now that you've removed the old sink and cleaned off any debris, you're all set to install the new sink.
How long does it take to install a new sink?
While many people call a plumber to complete the installation of a new sink, installing a sink can be completed in a couple of hours with just a few basic tools and supplies, saving you hundreds of dollars. Put your checkbook away, strap on a tool belt and knock out this sink installation on your own with our guide detailing how to change a kitchen sink.
What are some common mistakes when installing a kitchen sink?
Two common mistakes with a kitchen sink install are forgetting to clean the new sink thoroughly before installing and forgetting to install the new faucet before installing the new sink.
What is the best way to seal a sink and drain basket?
Many people use plumber’s putty instead to seal the connections between the drain basket and sink and the sink and countertop. Plumber’s putty dries out over time, allowing water to leak between these seams and cause damage. Use caulk, which won’t dry out.
How to connect schedule 40 PVC pipe?
Cut the piece of schedule 40 PVC pipe so that the tailpiece lines up with the drain pipe. Attach the pipe to the tailpiece. Connect the P trap to the tailpiece and the drain pipe. Once all the connections are made, tighten each nut with locking pliers.
How deep should a kitchen sink be?
Most kitchen sinks range between 8 and 10 inches in depth. While a deeper sink may make it easier to soak (and pile up) dishes, it can make it harder for shorter family members to use.
How long does it take to replace a kitchen sink?
It's not so easy to install a kitchen sink without destroying your countertop, but a DIYer with average skills can complete the replacement in about four hours. So many elements in kitchen design have remained common over the decades. Cabinets still have raised panels. Countertops are still made of plastic laminate.
How to flush sediment from a faucet?
Working on plumbing often releases sediment in the pipes, clogging your new faucet. Flush this sediment by purging the lines into a bucket before attaching them to the faucet.
What is a sink kit?
A sink kit includes drainpipes, fittings, shutoff valves, supply lines and new basket strainers.
How to measure a sink tailpiece?
Measure the sink tailpiece between the basket strainer and the tee. That measurement is the extra depth that can be added to the sink bowl without lowering the drainpipe going into the wall. Also be aware that a new disposer may have a lower drainpipe than your existing one—but it can’t be lower than the tee. If the disposer drainpipe will be too low, consider a sink with different depth bowls. You’ll have a deep bowl for dishes and a shallow one for the disposer.
How many holes does a sink have?
Most sinks have three holes for the faucet and a fourth for an accessory, such as a sprayer or a soap dispenser. But some faucets require only one or two holes, and you may not want enough accessories to use the rest. You can buy plugs for unused holes, but they usually don’t match the sink. If the sink doesn’t have enough holes, cutting an extra hole in stainless steel or cast iron is often difficult or impossible.
How to test a valve for leak?
To test the valves, close them and turn on the faucet. The faucet may drip for a minute or two, but if the drip continues, the shutoff valves are leaking. Repair or replace old valves. If you’re buying new ones, use quarter-turn balltype shutoff valves. They’re more reliable and less likely to leak at the packing nut.
Why cut a sink at 90 degrees?
Contractors often cut them at 90-degree angles (instead of rounding them off) because it’s faster. Take the measurements with you when buying the new sink and make sure it’ll cover the opening, including any square corners. If you can’t find a sink that’ll fit, buy a larger one and enlarge the opening.
Can you cut caulk through laminate?
If you’re replacing the sink but keeping the laminate countertop, you’ll have to cut through the caulk. That can be tricky, especially if the caulk has hardened. You’ll need lots of patience and these items: shims, a few feet of 2×4, a stiff putty knife and a heavy-duty solid-blade utility knife.
Can a sink be too small for a countertop?
Before removing the existing sink, measure the opening from underneath. Measure all four sides because the cutout may not be square. Pay special attention to the corners.
