- Dig a trench for the sump pump drain line that is at least 2 feet wide and the depth of the frost line in your area, plus an ...
- Create the proper slope to drain the water away from the house by, first, tying a string to a stake at the beginning of the trench and attach ...
- Measure the string with a tape measure. For each 8 feet of string, the slope should be 1 inch. ...
- The bottom of the trench must be the same distance from the string the entire length of the trench. ...
- Place the rigid hose in the trench so the top end is as close to the sump pump as possible.
- Attach the sump pump drain line to the sump pump. ...
- Place a screen over the opening to prevent animals from making nests in the drain line.
- Replace soil, and then sod, back in the trench. Gently press the sod down by walking on it and water thoroughly to encourage growth.
How to install or replace a sump pump?
Sump pump installation can be a DIY job, but you’ll need all the time and tools needed to:
- Pick the right spot for your sump basin and pump
- Install or have access to a GFI (ground fault interrupter) outlet
- Dig a hole at least 6” deeper and 10” wider than your sump pump
- Attach the adapters
- Install the sump pump check valve to prevent backflow of water into the house’s water system
Do I need sump pump or drain tile?
Do I Need Drain Tile? If you notice water in the basement or crawl space after heavy rain or when the snow melts, a drainage system is most likely the answer. If you have a sump pump or drainage system that’s not working as it should, have it inspected by a professional that specializes in basement or crawl space waterproofing.
Does a plumber install a sump pump?
To properly install a sump pump, hire a plumber that is licensed and insured. A plumber is experienced in sump pump replacement, as well as complete system installs which include the basin, the pump, and the drains. How Long Does It Take To Install? A simple sump pump installation can take from 8-10 hours.
Can I connect my sump pump to the sewer line?
Using sewer drain for sump pump might not be a good idea since most of the states in the USA are now banning this. It’s okay if your sump pump is connected to storm sewers, but you should avoid connecting it to the sanitary sewer. It’s against the law to discharge a sump pump into the sanitary sewer system. Why?
How do you install a sump pump discharge line?
How to Install a Sump PumpAttach Check Valve to Discharge Pipe. ... Take Your Measurements.Attach Adapter to PVC Pipe. ... Test the Sump Pump & Float. ... Drill the Weep Hole. ... Cut the PVC Piping.Drop Pump Into the Pit. ... Attach Discharge Pipe to Check Valve.More items...
Where should a sump pump drain line be?
Most commonly, sump pump experts recommend having it pump to an external discharge line, which then goes out of the home and into the yard toward a downward slope. When the discharge line ends, it should be far enough away from the home that the water doesn't pool around your home's foundation again.
How deep should a sump pump discharge line be buried?
Discharge lines should also be deep in the ground so that they don't freeze during cold winter days. As such, we suggest that you install it two feet below the frost line. If you don't do so, it can freeze and clog, making it impossible for the sump pump to do its job.
How far can you run a sump pump discharge line?
Most sump pumps have a recommended discharge size of 1.5 inches. The line must be run to the outside of the house.
Do you need to drill a hole in sump pump pipe?
Sump pumps need Weep Holes (relief holes) in order to prevent air locking the impeller chamber. This is important because it allows air to bleed out of the interior of the pump that would normally keep the next cycles from starting.
How much does it cost to bury a discharge pipe sump pump?
You'll have to include the cost to bury your sump pump's discharge pipe, and this cost ranges from $250 to $2,000. Most sump pumps go in basements, and they could have gravel or dirt floors that are easier to work with.
How do I drain my sump pump water away from my house?
2:215:51How to drain sump pump water away from the house. - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe put gravel at the end of our trench. We're going to use that for some additional drainage.MoreWe put gravel at the end of our trench. We're going to use that for some additional drainage.
Can I discharge my sump pump into the street?
In order cases there may be a flooding emergency in their basement and they have no other choice but to let the water drain into the the road. We recommend talking to them and letting them know that pumping sump water into the street is illegal and their pump needs to be attached to proper drainage.
How do I drain my sump pump water away from my house?
2:215:51How to drain sump pump water away from the house. - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe put gravel at the end of our trench. We're going to use that for some additional drainage.MoreWe put gravel at the end of our trench. We're going to use that for some additional drainage.
How do you bury a sump pump discharge pipe?
0:572:57How We Do It: Buried Sump Pump Discharge Lines - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the first thing we do is we core a two inch hole through the wall. And it allows for the inch.MoreSo the first thing we do is we core a two inch hole through the wall. And it allows for the inch. And a half pvc to pass.
Can I drain my sump pump into the sewer?
It is critical that sump pumps discharge to the yard or storm sewer, not to the sanitary sewer. It is illegal to connect your sump pump into your sanitary lateral. Not only can this cause serious health and safety concerns, it is also costing county rate payers.
How far away should a sump pump be from the house?
This tube is like a hose and is flexible. The end-point of the sump pump discharge hose should be 10 feet away from your home. It’s better if you can make it 20.
How big is a sump pump discharge pipe?
The same thing can be said about the size of the sump pump discharge pipe. The usual diameter of the discharge pipe is 1.25” to 1.5”.
What is discharge line in sump pump?
The discharge line is the main part of the sump pump. It carries out water from the sump pump to the outside of your basement. The design of a sump pump discharge line underground is elementary in deciding whether the line would work swiftly or get clogged. There are different sump pump discharge options that render consumers confused about the correct usage of the pump. We’re here to make it easy for you.
How does a basement water pump work?
Your basement water pump collects water from the underground of the basement and prevents water from clogging in the foundation of the home. The discharge line collects water from the pump and releases it to a safe distance away from your house. But when taking the water out, the sump pump may cause several problems to the adjacent areas.
What happens if you keep the sump pump at a lesser distance?
If you keep the end-point at a lesser distance than this, the discharged water will get absorbed by the same soil that originated it. Thus, your sump pump will overwork for nothing and the soil around your foundation will get damp. The repetition of this will result in foundation damage and even collapse.
What happens when you take water out of a sump pump?
But when taking the water out, the sump pump may cause several problems to the adjacent areas. If the discharge line isn’t installed properly or is used all year long, it will result in potholes on the paved roads, water clogging on the unpaved lanes, and problems in the local streets or sidewalks.
Why is it important to install an underground discharge line?
Correct installation of the underground discharge line is essential for the performance of the line and the pump. Though the installation process varies with the types of sump pumps, you have to know the basic things like how deep should a sump pump discharge line be and how to route sump pump discharge.
What is a check valve in a sump pit?
The check valve is there to make sure that water being pumped out of the sump pit does not go back in. It has a flap that closes when water pressure passing through it ceases, blocking any water that may fall back in. Cut another piece of pipe and clean both ends. Attach this pipe to the other end of the valve.
Why is a sump pump discharge pipe important?
It is responsible for the transport of the water to a higher and safer location to avoid more flooding inside the house. The importance of this pipe cannot be understated ...
Where to discharge sump pump?
Decide where the water will be released. You can discharge it into your back or front yard, safely away from the water spilling into your basement. You can also point it directly to your community’s common sewer or drainage system. Whatever you decide, it is important to make sure that the sump pump discharge point is well separated from the source point.
