What is an ACO drain?
- Step 1: Prepare the area Excavate a neat trench at the installation site to the depth and width of your chosen ACO drain. ...
- Step 2: Lay a firm base ...
- Step 3: Prepare the ACO drain outlet ...
- Step 4: Assemble the components ...
- Step 5: Prepare for backfilling ...
- Step 6: Complete the installation of ACO Drain
Full Answer
What is an installation device?
How does QuickLok work?
Do you need to fabricate a trench?
How do you install a ACO drain?
ACO drains are simply drainage products manufactured by ACO.Step 1: Prepare the area. ... Step 2: Lay a firm base. ... Step 3: Prepare the ACO drain outlet. ... Step 4: Assemble the components. ... Step 5: Prepare for backfilling. ... Step 6: Complete the installation of ACO Drain.
Where do you place a ACO drain?
In a domestic setting this might be at the entrance to your driveway or the threshold of your garage door (depending on which way the ground slopes), or at the edge of or within a paved area such as a patio.
How do you install an outdoor channel drain?
3:2110:21How to Install the NDS® Pro Series Channel™ Drain - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou will only need four inches of concrete on each side the trench for the channel drain needs to beMoreYou will only need four inches of concrete on each side the trench for the channel drain needs to be as long and wide as the channel itself plus eight inches for concrete.
How deep should the drainage channel be?
The first step is to dig a neat trench out of the ground, deep enough to ensure the channel drain fits neatly and reaches the surface, 2mm below the surrounding flooring, but with an extra 100mm below to allow for the application of concrete.
Does an ACO drain need a trap?
This ACO MonoDrain foul air trap is a necessity if a channel drainage system is to be connected to mains sewers. It features a small water reservoir that holds foul smelling air so that it won't travel up the pipework and out of the channel grates.
What does an ACO drain connect to?
Underground Drainage. The Aco Drive Drain system is a surface drain. It collects water from the surface of a pavement and directs it into an underground drain that, in turn, directs it elsewhere, to the main Surface Water sewer, a nearby ditch or watercourse, a soakaway or other suitable SUDS system.
Can you install a channel drain without concrete?
Channel drain can be made from different materials like plastic and concrete. Polypropylene, a lightweight plastic, is often used due to its sturdy construction and chemical resistance. That makes it a major plus for residential applications.
Do channel drains need to be sloped?
Something to keep in mind with regard to in-floor drainage systems is that, for the system to work, floors must have a slope to them. This slope does not have to be extreme; it should simply slope enough for gravity to allow water to flow along the floor surface to the drain channel and then along the channel.
How do you install a channel drain in a driveway?
5:317:29How to Install a Channel Drain | Ask This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay go right in the trench. Hold your end up so it doesn't get dirty. Come down to me push pushMoreOkay go right in the trench. Hold your end up so it doesn't get dirty. Come down to me push push push. Perfect hey john take a peek over here let me show you how i finished off this pipe.
Do you lay ACO drains level?
A common misconception is the belief that a slope is needed for water to drain effectively. However, this is not necessary. As long as the channel is laid flat and level, the water will be able to flow, providing the outlet is below the level of the channel.
How do you fit drainage channel to drain?
0:202:13How to Install a Channel Drain – DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt needs to be wide enough to allow for a minimum of two inches of backfill on each side of the.MoreIt needs to be wide enough to allow for a minimum of two inches of backfill on each side of the. Channel. In step to the channel outlets are connected to three or four inch sewer and drain pipe.
Where does channel drain water go?
Accordingly, channel drains should always be positioned at a point where surface water is likely to roll towards (i.e. not uphill!). Linear drainage systems drain water along their entire length, rather than at one point like a gully does. They are made up of an enclosed channel with some form of grating over the top.
Can ACO drains be laid level?
As long as the channel is laid flat and level, the water will be able to flow, providing the outlet is below the level of the channel.
Does a channel drain need to be sloped?
How's the grading in the area? The slope needs to be just right to get water into the drain and away from your home. If your channel is set too high, water can flow backwards instead of into it!
Do you need drainage on a patio?
Yes, you absolutely need to plan for the drainage of your patio pavers. Currently, wherever your patio will sit, water falls on the grass and is absorbed into the ground. That becomes a bit more complicated when there are patio pavers in the way. Water may not soak into your patios at all or may do so very slowly.
How do you install a channel drain in a driveway?
5:317:29How to Install a Channel Drain | Ask This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay go right in the trench. Hold your end up so it doesn't get dirty. Come down to me push pushMoreOkay go right in the trench. Hold your end up so it doesn't get dirty. Come down to me push push push. Perfect hey john take a peek over here let me show you how i finished off this pipe.
Installation instructions and guidelines
ACO as a leader in development and manufacturing of stainless steel drainage, in cooperation with building companies, has developed a comprehensive installation guideline document, which helps installers with installation related issues.
Grated Polycrete Channels - Site Installation Manual - ACO Drain
Commercial Trench Drains 3 Polycrete ® Channels 1300 765 226 (AUS) 0800 448 080 (NZ) +61 2 4747 4000 (EXPORT) Male end (downstream) In-line pit with
What is ACO drain?
ACO drains are simply drainage products manufactured by ACO.
Where is the preformed outlet located on an ACO drain?
In order to allow connection to the drainpipe, the preformed outlet will need to be cut out. This is located in the base of the ACO drain channel.
What type of fill is needed for an ACO drain?
The type of material you need depends on the loading class of the ACO drain. If the ACO drain is for pedestrian traffic only, then a compacted fill can be used along the base of the trench. However, a bed of good quality concrete is required if the ACO drain is in an area where there will also be vehicles.
What is the phone number for drainage?
If you would like any advice or assistance call our drainage experts on 01752 692 221, who can help you complete your project.
What is ACO channel drainage?from aco.co.uk
Included in ACO’s extensive surface water management array of products is the world’s leading range of channel drainage solutions. They are typically designed for efficient removal and conveyance of surface water or liquid. In some cases they are also used for attenuation or containment of same.
What is the phone number for ACO drainage?from drainagesuperstore.co.uk
If you would like any extra advice or assistance on ACO drainage products, call our drainage experts on 01752 692 221or use the live chat on your screen and we'll be happy to assist you. They will be glad to help you complete your project.
How does channel drainage work?from drainagesuperstore.co.uk
But how does channel drainage work? The simplest explanation as to how channel drainage works is that it is based on gravity. Channel drains should always be positioned with a downward incline, known as a fall. If the fall is too steep this will be detrimental as the water won't be able to drain fast enough. We recommend a 1 to 150 fall at most.
How wide is the Aco doorway drain?from drainagesuperstore.co.uk
ACO DoorWay drain slots underneath the doorway at the point of installation meaning that the door frame doesn’t need to be cut or altered. At 125mm wide and 1000mm in length, this DoorWay drain is perfect for the average width of a doorway without any alternations to the product.
How wide is the threshold drain?from drainagesuperstore.co.uk
The width of ACO Threshold drain is just 60mm , coming in handy 1m lengths to easily cover the average door width. Choose from a silver aluminium grate or black aluminium grate to match your home's exterior. To make sure this threshold drain is safe for pedestrian traffic it features ACO’s Heelguard grating as standard. This grating has drainage holes on the top which are too small for high heels to get caught in, protecting people walking in and out of the house.
What is a linear drain?from drainagesuperstore.co.uk
Linear drainage systems take in water along their entire length, rather than at one point like a gully does. They are made up of an enclosed channel with some form of grating over the top, so they're well suited to areas like garage thresholds where water would otherwise flow naturally into the garage. The main purpose of a channel drain is to remove surface water away from a selected area. This helps to prevent flooding and overspill. These drains are also used to control water flow in an area by reducing the stress being put on the system.
Why is channel drainage called linear?from aco.co.uk
Because channels tends to be less deep than other systems it is particularly well suited when constructing drainage in areas with complex underground services and utilities. For this reason the term linear is used to emphasise the surface nature of channel drainage.
Why install a channel drain in driveway?
Installing channel drainage in your driveway. Installing channel drain in your driveway is especially useful if you have a sloped drive which leads onto a main road. This slope will naturally direct the excess rainwater into the channel drain before hitting the road. This is the preferred method so that any run off from your property goes into ...
Can you connect a channel drain to a soakaway?
If you wish to connect your channel drain to a soakaway system, similarly you simply need to join your channel to the drainage pipes which lead to your soakaway.
How to contact ACO drain?
If you have any questions, queries or are looking for product recommendations regarding channel drains, don’t hesitate to get in touch – call the team on 01752 692 221 or use the live chat in the bottom right-hand corner and we will be more than happy to help.
What are channel drains?
Channel drains, also known as trench drains, linear channels or drainage channels, are designed to provide an efficient method of surface water management, particularly on non-porous surfaces, preventing ponding from occurring and ensuring even heavy downpours are dealt with effectively.
What is a B125 drain?
B125 channel drains are suitable for areas where the maximum weight load is up to 12.5 tonnes. B125 channel drainage is most commonly used in domestic driveways, larger patios and thresholds.
What is the maximum weight of a Class A15 channel drain?
If a channel drainage product is Class A15 rated, it is suitable for pedestrian traffic only, with a maximum weight load of 1.5 tonnes. Use Class A15 channel drainage for gardens, patios and small landscaping projects.
What is the weight of a Class E600 drain?
Class E600 channel drainage. Channel drains that are classed as E600 can withstand a maximum weight load of 60 tonnes. E600 channel drains are most commonly manufactured from reinforced concrete and are generally used in industrial areas such as loading bays, factories and warehouses.
What is the best material for channel drains?
ACO has its very own high strength concrete-like material, known as Vienite , which is a lightweight yet strong material with high chemical resistance. Hauraton uses fibre-reinforced concrete to provide extra stable channel drains without requiring thick walls, reducing the overall weight of the product.
Where are channel drains used?
Channel drains are used in a wide range of locations, varying from garage thresholds, patios and driveways to car parks, airports, swimming pools and more.
What is an installation device?
Installation devices are used to align channels to create a complete trench run. Once the installation is complete using these devices the concrete is poured around the device and channels. Installation devices allow a single concrete pour.
How does QuickLok work?
Comprises a spigot fitted onto the grate and a removable QuickLok bar in the channel, the QuickLok system locks the grate to the channel by aligning the spigot over the bar and applying pressure until they ‘snap’ together.
Do you need to fabricate a trench?
On-site fabrications are required whenever a trench is to form a corner or junction. All half metre polymer concrete channels have drill-out details on the side to aid the formation of corners and T junctions but all channels can be cut and fabricated to create the desired layout.
