Insteon Installation – Circuit with 3 (or more) Switches
- Step 1: Connect SwitchLinc bare copper wire to ground
- Step 2: Connect SwitchLinc white wire to neutral
- Step 3: Cap SwitchLinc red wire
- Step 4: Connect Switchlinc black wire to line plus one traveler (preferably black) and note color of the traveleryou are using as this will carry line voltage to Box 2. ...
- Step 5: Cap any unused traveler wire.
How do I install Insteon wall switch and dimmer switch?
Turn off power and connect the corresponding wires from the junction box with the Insteon Wall Switch and cap them with wire nuts. Install Insteon Wall Switch, attach the wall plate and turn on power. Follow the on-screen instructions in the Insteon app to add Dimmer Switch.
How to connect Insteon wall switch to the junction box?
Turn off power and connect the corresponding wires from the junction box with the Insteon Wall Switch and cap them with wire nuts. Install Insteon Wall Switch, attach the wal plate and turn on power. Follow the on-screen instructions in the Insteon app to add On/Off Switch.
How do I set up Insteon for hub?
Download and install Insteon for Hub app, available for iOS and Android. Choose “Create New Insteon Account” on the first page. Accept the license terms and create your account. Plug in your hub (if it isn’t already), and tap next in the app. Next, you’ll be asked for a username and password. You’ll find this on a sticker on the bottom of your hub.
How do I connect my device to Insteon?
Then hook up the device and continue with the process. If this is your first device, Insteon will take you directly to the “Add Device” screen. If not, you’ll need to get there from the home screen of the app by going to Rooms > All Devices, then clicking the “+” sign in the upper right-hand corner.
How do you reset an Insteon switch?
Pull the set button out completely, let it stay out for 10 seconds. Push it back in PAST THE NORMAL POINT, all the way in and hold it for about 5 seconds or so until you hear a beep. If you don't hear a beep after 7 or 8 seconds let go.
Why are Insteon products not available?
Insteon's servers went offline last April when SmartLabs, the company that owned the smart lighting system, ran into “financial difficulties.” A financial services firm had been appointed to sell its assets, but this “group of passionate users” stepped in and has taken over.
Is there a replacement for insteon?
Insteon Alternatives Technology Discussion For those looking to rip out Insteon and start from scratch, one of the easiest hubs to use is the Aeotec SmartThings hub which supports a wide range of ZWave, Zigbe and IP enabled devices. It uses the SmartThings app and cloud service. It also works with SmartThings sensors.
How do you wire a dimmer switch?
1:472:44How to Install a Dimmer Switch - Ace Hardware - YouTubeYouTubeStart of suggested clipEnd of suggested clipA single-pole dimmer like this one has two wires that you're going to connect to the wires comingMoreA single-pole dimmer like this one has two wires that you're going to connect to the wires coming out of the box and a separate ground wire. Go ahead and take the stripped wires twist.
Is Insteon gone for good?
Following a sudden shutdown of the company's forums and the suspicious distancing of key executives (including the president and chairman of Insteon's parent company), Insteon has finally issued a statement that seems to confirm that it's going out of business.
Is Insteon shut down?
Smart Home Company Insteon Shut Down—and Left Customers in the Dark | WIRED.
Is Insteon coming back?
You will be able to use all your existing Insteon devices and integrations. However, the company is rolling out a new subscription model for getting your Insteon Hub and devices back up and running. The company is offering one- and two-year plans for users to subscribe and help pay for the services.
Can I use Insteon without hub?
Insteon switches do NOT need a hub. Using a hub lets you control these via Echo, Google, …
What Is Insteon compatible with?
Insteon works with the Google Assistant on voice-activated speakers, eligible Android phones, TVs and more.
What are the 3 wires on a dimmer switch?
If you can turn your lights off using a different switch than the one you used to turn them on, skip down to the 3-way switch section. Single pole switches will have 3 wires: a hot lead wire, a ground wire, and a traveler wire. Older homes may only have a hot lead and a ground wire.
Is a dimmer switch hard to install?
Installing a dimmer switch is just as easy as installing a single-pole switch, and adjustable overhead lighting is a great improvement that adds appeal to any home.
Does a dimmer switch require special wiring?
Dimmer switches don't need special wiring at all. Single-pole dimmer switches can just replace existing single-pole light switches, and 3-way dimmers can easily replace a standard 3-way switch or be used as a single-pole switch with one wire capped off.
Is Insteon coming back?
You will be able to use all your existing Insteon devices and integrations. However, the company is rolling out a new subscription model for getting your Insteon Hub and devices back up and running. The company is offering one- and two-year plans for users to subscribe and help pay for the services.
Will Insteon return?
As suddenly as it disappeared, Insteon has returned. The smart home company's services started coming back to life this week, and on Thursday, Insteon announced that a group of customers had purchased and are resurrecting the business.
Are Insteon servers offline?
In today's “predictable things that happened before and definitely will happen again”, Insteon, a smart home company boasting the Insteon ecosystem of devices built around their proprietary communication standards, has shut down their servers without a warning.
Did Insteon buy?
No, Smartlabs didn't suddenly figure out how to keep Insteon in business. Instead, the company was bought out — and it wasn't a big tech giant, if that's what you're thinking. According to a blog post on the official Insteon website, a "small group of passionate Insteon users" got together to acquire Insteon.
How to set up Insteon Hub?
Setting them up is fairly simple: first, grab your Hub and plug it into the wall and your router via Ethernet. Make sure it’s easily reachable, since you’ll need to access it again in a moment. Advertisement.
How to add devices to Insteon?
On the Add Device screen, Insteon will present you with a list of possible devices. Tap the one that matches the device you’re adding. In our case, we’re adding a plug-in module, so we’ll tap that.
What Is Insteon?
Insteon, at its simplest, is a line of smarthome products . Insteon makes smart outlets, smart light bulbs and switches, a smart thermostat, motion sensors, security cameras, and other products designed to be a sort of “one stop shop” for all your smarthome needs. You just need an Insteon Hub or Hub Pro to control it all.
How to create an Insteon account?
Download and install Insteon for Hub app, available for iOS and Android. Choose “Create New Insteon Account” on the first page. Accept the license terms and create your account.
Can you control Insteon with Echo?
But if you put those devices into scenes, you can control them with your voice that way. If you have an Echo, be sure to read our guide on setting it up with Insteon for more info. READ NEXT.
Does Insteon use ZigBee?
Unlike many other smarthome hubs, which use Wi-Fi, ZigBee, or Z-Wave to communicate with different products, Insteon uses its own proprietary protocol. It does have limited support for a few non-Insteon products–like the Nest Thermostat and Amazon Echo–but doesn’t offer any integration with IFTTT.
