How to Install Apache Web Server on a Windows PC
- If you haven't done so already, download the Apache HTTPD Web Server from the Apache web site .
- Double click the MSI file saved on your Windows Desktop.
- Click "Next>".
- Click the radio button "I accept the terms in the license agreement".
- Next, fill in all the text boxes...
- Download the installation media in the form of a ZIP file.
- Extract the contents of the Apache Web Server 2.4 zip to the file system.
- Locate the extracted Apache24 folder and copy this folder to the root of C:\
- Open the C:\Apache24\bin folder and run the httpd.exe command.
How to configure Apache web server on Linux?
The process for completing virtual server Apache configuration is simple:
- First, input “$ sudo nano /etc/apache2/sites-available/example.com.conf” to open your virtual host configuration file.
- Replace “example.com” appropriately. ...
- If an error occurs, reference these instructions to ensure nothing has been mistyped or inputted incorrectly.
How to install AMPPS web server on Linux?
Installing LAMP
- Download the LAMP stack from here : http://www.ampps.com/download. Download the one under Linux section.
- Run the following command to Install AMPPS on Linux. Note: You must have administrator privileges on your computer to run and install AMPPS.
- Run the file /url/local/ampps/Ampps from the GUI to start the Application. ...
How to install and configure FTP server on Linux?
Install, Configure, and Secure FTP Server in Linux
- Vsftpd FTP server features. There are several FTP servers available for you to use, commercial and open source. ...
- FTP server setup. Once you’ve installed the package, you can run the service and enable it to run at boot time. ...
- Setup FTP server as anonymous only. ...
- FTP server security. ...
- SFTP vs. ...
- Jailing FTP users. ...
- Linux FTP server commands. ...
How to install SSL certificate on Linux Apache web server?
Install SSL Certificate on Apache 2 Web Server Download and unzip your certificate files Download and unzip your SSL certificate files by clicking on the download link in your fulfillment email or from your GeoCerts SSL Manager account. There will be two .crt files. your_domain_com.crt CA_Bundle.crt
How do I download Apache HTTP Server?
Navigate to Apache Website - (httpd.apache.org) Click on "Download" link for the latest stable version. After being redirect to the download page, Select: "Files for Microsoft Windows" Select one of the websites that provide binary distribution (for example: Apache Lounge)
How do I install Apache HTTP on Windows 2021?
Install Apache ServiceIn your Command Prompt window, enter (or paste) the following command: httpd.exe -k install -n "Apache HTTP Server"From your Command Prompt window enter the following command and press 'Enter.Restart your server and open a web browser once you are logged back in.
How do I install and configure Apache?
Installing Apache. To install Apache, install the latest meta-package apache2 by running: sudo apt update sudo apt install apache2. ... Creating Your Own Website. By default, Apache comes with a basic site (the one that we saw in the previous step) enabled. ... Setting up the VirtualHost Configuration File.
How do I install Apache on my computer?
You can install Apache anywhere, such as a portable USB drive (useful for client demonstrations).Step 1: Configure IIS. ... Step 2: Download the files. ... Step 3: Extract the Files. ... Step 4: Configure Apache. ... Step 4: Change the Web Page Root (optional) ... Step 5: Test your Installation. ... Step 6: install Apache as a Windows service.More items...•
How do I install Apache HTTP on Windows 10?
Step by step Apache install on WindowsDownload the installation media in the form of a ZIP file.Extract the contents of the Apache Web Server 2.4 zip to the file system.Locate the extracted Apache24 folder and copy this folder to the root of C:\Open the C:\Apache24\bin folder and run the httpd.exe command.
How do I setup an HTTP Server on Windows 10?
WindowsStep 1: Open the Server Manager.Step 2: Click Manage > Add Roles and Features.Step 3: Click Next.Step 4: Click Next.Step 5: Select the server and click Next.Step 6: Select Web Server and click Next.Step 7: Click Next.Step 8: Click Next.More items...•
How do I setup a HTTP server?
To set up an HTTP server:Install the Apache HTTP server package. ... Create the directory where you will copy the full Oracle Linux Release 6 Media Pack DVD image, for example /var/www/html/OSimage/OL6.6 : # mkdir -p /var/www/html/OSimage/OL6.6. ... Edit the HTTP server configuration file, /etc/httpd/conf/httpd.More items...
How do I configure HTTP?
Configure HTTP protocolSelect Enable Tunneling.Provide values for Tunneling Client Ping and Tunneling Client Timeout. Note: These settings apply to all protocols in the server's default network configuration that support tunneling. See Setting Up WebLogic Server for HTTP Tunneling.Click Save.
How do I setup a web server?
Set Up Your Very Own Web Server!Step 1: Acquire a Dedicated PC. This step may be easy for some and hard for others. ... Step 2: Get the OS! ... Step 3: Install the OS! ... Step 4: Setup VNC. ... Step 5: Install FTP. ... Step 6: Configure FTP Users. ... Step 7: Configure and Activate FTP Server! ... Step 8: Install HTTP Support, Sit Back and Relax!More items...
How do I find Apache HTTP Server version in Windows?
Find the Server Status section and click Apache Status. You can start typing “apache” in the search menu to quickly narrow your selection. The current version of Apache appears next to the server version on the Apache status page. In this case, it is version 2.4.
How do I start an HTTP service in Windows?
Using Windows services to start IBM HTTP ServerRight-click Start HTTP Server and select Properties.Select Compatibility.Select the check box for Run this program as an administrator.Click OK.
How do I start Apache on Windows?
2 AnswersClick the start button and type CMD (if on Windows Vista or later and Apache is installed as a service make sure this is an elevated command prompt)In the command window that appears type cd C:\xampp\apache\bin (the default installation path for Xampp)Then type httpd -k restart.
How do I find Apache HTTP Server version in Windows?
Find the Server Status section and click Apache Status. You can start typing “apache” in the search menu to quickly narrow your selection. The current version of Apache appears next to the server version on the Apache status page. In this case, it is version 2.4.
How do I setup a HTTP Server?
To set up an HTTP server:Install the Apache HTTP server package. ... Create the directory where you will copy the full Oracle Linux Release 6 Media Pack DVD image, for example /var/www/html/OSimage/OL6.6 : # mkdir -p /var/www/html/OSimage/OL6.6. ... Edit the HTTP server configuration file, /etc/httpd/conf/httpd.More items...
How do I start an HTTP service in Windows?
Using Windows services to start IBM HTTP ServerRight-click Start HTTP Server and select Properties.Select Compatibility.Select the check box for Run this program as an administrator.Click OK.
How do I install apache patch on Windows?
Step 1 - Download Apache for Windows. Apache for Windows may be freely downloaded from ApacheLounge. ... Step 2 - Unzip. ... Step 3 - Configure Apache. ... Step 4 - Start Apache. ... Step 5 - Check Apache. ... Step 6 - Install as a Windows service: ... Step 7 - Monitor Apache (optional)
Steps Download Article
If you haven't done so already, download the Apache HTTPD Web Server from the Apache web site . Be sure to download the apache_2.2.16-win32-x86-no_ssl MSI installer here: ( http://httpd.apache.org/download.cgi )
About This Article
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 40 people, some anonymous, worked to edit and improve it over time. This article has been viewed 483,683 times.
What port does Apache listen to?
Apache listens for requests on TCP/IP port 80. You need to uninstall or disable any program that uses that port. If you have a Professional or Server version of Windows, you may already have IIS installed. If you would prefer Apache, either remove IIS as a Windows component or disable its services.
What is a web server?
A web server is software that listens for requests and returns data (usually a file). When you type “www.mysite.com”, the request is forwarded to a machine running web server software which returns a file back to your browser — such as the contents of index.html. The browser might then make further requests based on the HTML content — like CSS, ...
What web server is used for ASP.NET?
Unless you’re creating ASP.NET applications on Microsoft IIS, your host is likely to use Apache — the most widespread and fully-featured web server available. It’s an open-source project, so it doesn’t cost anything to download or install.
Can a browser open HTML files?
Since the web server sits between your browser and the requested file, it can perform processing that’s not possible by opening an HTML file directly.
Overview for the impatient
Newer releases of these distros use dnf rather than yum. See the Fedora project's documentation for platform-specific notes.
Download
The Apache HTTP Server can be downloaded from the Apache HTTP Server download site, which lists several mirrors. Most users of Apache on unix-like systems will be better off downloading and compiling a source version. The build process (described below) is easy, and it allows you to customize your server to suit your needs.
Extract
Extracting the source from the Apache HTTP Server tarball is a simple matter of uncompressing, and then untarring:
Configuring the source tree
The next step is to configure the Apache source tree for your particular platform and personal requirements. This is done using the script configure included in the root directory of the distribution.
Build
Now you can build the various parts which form the Apache package by simply running the command:
Install
Now it's time to install the package under the configured installation PREFIX (see --prefix option above) by running:
Customize
Next, you can customize your Apache HTTP server by editing the configuration files under PREFIX/conf/.
Step 1 – Installing .NET Framework
Before installing the Apache HTTPD, we need to ensure we have the .NET framework installed. Installing the .NET framework is not mandatory but is helpful if you plan to run a MySQL server with Apache.
Step 3 – Installing Apache Server
The next step is to download and install the Apache HTTPD server. You can download the Windows binary from the following resources.
Step 4 – Adding to Path
We need to add the bin directory to the path to run apache binaries from anywhere in the Windows file system.
Step 5 – Configuring Apache
By default, Apache assumes you install it in the C:\Apache24. However, since we installed it under a different directory name, we need to change the default $ {SRVROOT} variable.
Step 6 – Running Apache Server
After completing all the steps above, we can run the apache server. Open the command prompt and enter the command:
Step 8 – Install the Apache Service
Although you can run the apache server with a simple HTTPD command, the server will die once you close the command prompt window.
Conclusion
This tutorial taught you how to fully install and configure the Apache HTTPD server on a Windows system.
Why is Apache running in console?
Running as a service should be preferred over running in a console window because this lets Apache end any current operations and clean up gracefully. But if the server is running in a console window, you can only stop it by pressing Control-C in the same window. You can also tell Apache to restart.
What operating system is Apache 2.4 on?
The primary Windows platform for running Apache 2.4 is Windows 2000 or later. Always obtain and install the current service pack to avoid operating system bugs. Apache HTTP Server versions later than 2.2 will not run on any operating system earlier than Windows 2000.
Does Apache recompile at runtime?
Apache for Windows contains the ability to load modules at runtime, without recompiling the server. If Apache is compiled normally, it will install a number of optional modules in the Apache2.4modules directory. To activate these or other modules, the LoadModule directive must be used.
Do you use backslashes in Apache?
The directives that accept filenames as arguments must use Windows filenames instead of Unix ones. However, because Apache may interpret backslashes as an "escape character" sequence, you should consistently use forward slashes in path names, not backslashes.
Does Apache support ISAPI?
Apache can also load ISAPI (Internet Server Application Programming Interface) extensions such as those used by Microsoft IIS and other Windows servers. More information is available. Note that Apache cannot load ISAPI Filters, and ISAPI Handlers with some Microsoft feature extensions will not work.
Does Apache have a parent process?
Because Apache for Windows is multithreaded, it does not use a separate process for each request, as Apache can on Unix. Instead there are usually only two Apache processes running: a parent process, and a child which handles the requests. Within the child process each request is handled by a separate thread.
Does Apache HTTP Server have binary?
The Apache HTTP Server Project itself does not provide binary releases of software, only source code. Individual committers may provide binary packages as a convenience, but it is not a release deliverable. If you cannot compile the Apache HTTP Server yourself, you can obtain a binary package from numerous binary distributions available on ...
