How To Install Closet Shelves | Rubbermaid Fasttrack Closet Kit
- 1. Secure the top rail Using the magnetic stud finder, I marked 64” up on the wall. ...
- 2. Install the vertical braces Installing the vertical braces ...
- 3. Secure the uprights to the wall with toggle bolts How do you secure these uprights to the wall? ...
- 4. Plug and play ...
How do you install Rubbermaid wood shelving?
1:166:14Installing Rubbermaid FastTrack Shelves - YouTubeYouTubeStart of suggested clipEnd of suggested clipCome together the LEDs. And then once you get the edge of the stud. You go to market. Then you keepMoreCome together the LEDs. And then once you get the edge of the stud. You go to market. Then you keep dragging it through then it goes away then you come in from the other.
How do you install Rubbermaid wall anchors?
0:070:53Plastic Toggle Anchors - YouTubeYouTubeStart of suggested clipEnd of suggested clipInsert the anchor into the hole. And tap it flush with a hammer insert the red key to pop the anchorMoreInsert the anchor into the hole. And tap it flush with a hammer insert the red key to pop the anchor open behind the wall. This is not necessary in thick or solid walls remove.
How do you install a closet insert?
0:172:16How to Install Wood Closet Organizers - YouTubeYouTubeStart of suggested clipEnd of suggested clipSome kits include a template to help position mounting cleats drill holes into the stud you markedMoreSome kits include a template to help position mounting cleats drill holes into the stud you marked during the prep. Then secure the cleat with lag bolts attach the top cleat too.
What screws to use on Rubbermaid shelves?
Drill holes for stud or wall anchors and secure each upright in two locations using #10 x 2" or #12 x 2 ½" screws (both size screws work with wall anchor). Insert brackets into uprights at desired locations and lock shelving into brackets.
How do you install plastic anchors without a drill?
0:472:33How to Put an Anchor in Drywall Without a Drill - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext we would take our drywall anchor and place it right on top of our screwdriver. Then we're goingMoreNext we would take our drywall anchor and place it right on top of our screwdriver. Then we're going to take it. Put it into the hole. And just begin to tighten it in. There.
How do plastic wall anchors work?
Plastic expansion anchors are made to hold a screw, expanding inside the wall as the screw is driven into them. They look like a jacket with ribs for your screw, and they're often packaged with the accompanying screw inside. You must drill a small hole before you install this fastener.
How do you attach a closet to the wall?
0:281:53How to Install a Closet Organizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe track height according to the plans. Next find the studs and mark their locations along theMoreThe track height according to the plans. Next find the studs and mark their locations along the track line cut the track to length and attach it to the back wall at the studs.
How do you attach closet organizers to the wall?
0:411:55How to Install a Wire Closet Organizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe installation is simple from here lock in the shelf brackets on the uprights. And snap theMoreThe installation is simple from here lock in the shelf brackets on the uprights. And snap the shelves into place attach the rod hooks cap the rod ends. And snap in the hanger rod.
How long does it take to install a closet system?
So while a reach-in closet can be as fast as a half a day to a full day, a walk-in closet typically takes a day or two, and a room-size boutique closet can take three to four days to complete.
How do you install closet shelves?
2:094:56How to Install DIY Closet Shelving - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace. Then we attach the wood board for the wall nice and strong. Next we catch the side. Strip.MorePlace. Then we attach the wood board for the wall nice and strong. Next we catch the side. Strip.
Is Closetmaid and Rubbermaid Compatible?
Closetmaid shelf supports and shelves will fit on the Rubbermaid or Elfa vertical hangers and vice versa.
How do you remove Rubbermaid closet shelves?
2:275:44How to Remove Closet Wire Shelves with Very Little Damage - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd uh you what you need to do is the same thing so basically you need to get under the nails. WorkMoreAnd uh you what you need to do is the same thing so basically you need to get under the nails. Work them out a little bit. Just enough so you can actually pull them with your needle nose.
Why wont my screw anchors go into the wall?
The trick to using them is to pinch the "shoulders" in until they are flush with the sides of the anchor body before pushing them into the hole. Drywall is fairly chalky and brittle, so it will give a little bit where needed to let the shoulders through.
How do you install expansion anchors?
1:232:31How to Install Single Expansion Anchors - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace the fixture over the anchor and insert the machine threaded bolt through the fixture. And intoMorePlace the fixture over the anchor and insert the machine threaded bolt through the fixture. And into the anchor. Once the bolts is finger tight use a wrench to expand the anchor.
How do you install drywall toggle anchors?
0:301:54How to Install Toggle Drywall Anchors : Drywall Help - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd go ahead and tighten it down to wherever. You need it to hang your picture on or to put yourMoreAnd go ahead and tighten it down to wherever. You need it to hang your picture on or to put your cabinets up.
How do you install plastic anchors in concrete?
1:212:37How To Install A Concrete Anchor EASILY - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the next step is to actually take the anchor. And place it in the hole. That you just drilled.MoreSo the next step is to actually take the anchor. And place it in the hole. That you just drilled. And then take a hammer and use that hammer to force the anchor into the hole.
What tools are needed to install rubbermaid shelving?
Generally, simple tools such as a hammer, electric drill, tape measure, pencil and a level are all that is necessary for installing Rubbermaid wire shelving.
What is rubbermaid wire shelving?
Rubbermaid wire shelving is manufactured in a number of styles, allowing a custom installation in nearly any space. Common uses include home closets, kitchen pantries, utility rooms, office storage and retail use. Steps to complete proper installation will vary with the particular product or package purchased, but all products follow common ...
Maximize Storage Space
Hang shelves and rods vertically or horizontally to create rows and maximize space.
Quick and Easy Installation
Rails, shelves, and telescoping rods can be set up in minutes with no cutting, using simple household tools.
Personalize with racks for bins and baskets, rods for suits and dresses, hooks for belts and ties, and more.
How to install rubbermaid fasttrack?
To install Rubbermaid Fasttrack, you’re going to have to mount the hooks and tracks on the wall of your choice. The rails need to be mounted on your wall studs. From there, you will need to assemble to specific Fasttrack storage items you want to use, and then slide them onto the rails. Rubbermaid did a remarkably good job at making Fasttrack one ...
What Do You Need To Use Rubbermaid Fasttrack Storage Items?
Before you start assembling those accessories or cabinet units, it’s important to make sure that you have Fasttrack rails. These rails come in their own package and can vary in lengths from 32 to 84 inches. They also come with all the equipment you’ll need to install them. After that, you can choose other Rubbermaid storage items in the Fasttrackline that you want to hang on the rails.
How much weight can a rubbermaid fasttrack rail hold?
1750 Pounds. This is the total amount of pounds that the ultra-strong Tool Cabinet Kit can hold. This is also the total amount of weight a Rubbermaid Fasttrack rail can hold. Wow!
Why do rubbermaids have fasttrack kits?
This is why many of the Fasttrack Kits exist: they make things easier and take the guesswork out of most of your storage planning. Since many of the kits are specifically geared towards one type of storage or another, it works out.
Can you get out of an Ikea toolbox?
For the most part, you won’t need much that you can’t get out of an Ikea toolbox. Most people are able to install the entire kit with a screwdriver and a hammer. If you want to get a power screwdriver, you can, but almost everything is meant to snap and lock into place after the rails are put together.
Can sheetrock handle railings?
Your regular sheetrock won’t be able to handle the railing system’s weight. Rubbermaid makes both horizontal and vertical rails, each of which is designed to work with specific tools and accessories in the Fasttrack family. Thankfully, both rail types will mount fairly easily. Here’s how to place your rails:
How to organize a closet?
Here are some of my best closet organization tips: 1 Always install your Rubbermaid® system according to manufacturers instructions. 2 Follow the weight restrictions on your shelving, and leave space between the lowest shelf and the floor for very heavy items. 3 Don’t try to tackle a closet in stages. Make time to pull everything out. Sort through items that you don’t need or use, and find an organization system that works for you. 4 Adding accessories helps to maximize your space, and you can add them on when you have time and money. 5 Be creative with storage space, and store items that you don’t regularly use but feel that you need to keep. 6 Work on eliminating clutter by sorting through unneeded or unused items regularly.
How to eliminate clutter?
Work on eliminating clutter by sorting through unneeded or unused items regularly.
Can you install a rubbermaid kit?
There are multiple ways that you can install a Rubbermaid® kit, and a wide variety of accessories available. The Rubbermaid® FastTrack® White Steel Valet Rod was out of stock in-store, and I hope to purchase it on our next trip to Lowe’s to help with hanging laundry straight from the dryer.
Do you need to cut a kit for a sandbox?
No cutting necessary and kits include all installation hardware.
Does Rubbermaid have a storage planner?
Rubbermaid has an online Rubbermaid® Storage Planner, that really helps with planning your space and itemizing what you need.