how do i install sense home energy monitor

1. Find a location near the electrical panel to install the Sense monitor mounting bracket. ...
2. Install the Sense mounting bracket using the supplied hardware.
3. Place the Sense monitor in the mounting bracket.
4. Refer to the Sense installation guide to finish installing the Sense monitor.
5. To power your Sense monitor, plug it into the receptacle and switch on the breaker.

Full Answer

How to connect Sense monitor to home network?

How does a sense monitor work?

Who should install Sense?

How to find a qualified electrician?

How does the Sense app work?

How often does a smart meter take readings?

How long does it take for Sense to detect a device?

See 2 more

Can I install sense monitor myself?

Sense should only be installed by a licensed electrician. Installation itself is quick and easy, but it requires opening up your electrical panel and connecting current sensors to the service mains. These wires are live, even with your main breaker switched off, and are thus very dangerous.

Is Sense easy to install?

Installation is pretty easy and you can do it yourself if you're not scared of opening up your electrical panel to expose the primary power lines coming into your home from your utility. Power for the Sense unit can be directly tapped inside the breaker box—just be sure to cut the power before doing this.

Does sense need its own breaker?

Installation of the Sense monitor requires a 240V circuit breaker to measure voltage on each phase.

Is Sense monitoring worth it?

For the most part, simply monitoring your energy usage won't save you money. It might help to know exactly how much energy your appliances are using, or to see the effects of vampire power when you unplug your TV, but real savings require a more hands-on approach.

Is sense any good?

Sense is proven to be 99.5% accurate, compiling millions of measurements every second to provide useful, up-to-the-minute data about your home's and appliances' energy consumption. Sense also identifies trends by day, week, month and billing cycle to demystify nebulous electric bills and show you ways you can save.

How long does sense signal check take?

In total, the Signal Check process can take up to 48 hours. If your Sense monitor is completing a Signal Check after 48 hours, please contact support. Once it's complete, the device detection process can begin and you'll see real-time energy usage data come into the app!

Can I add sense to an existing breaker?

Add the legs for the Sense unit to the existing 240V breaker for the dryer. According to Sense, this is fine to do since the device uses less than 5 watts of power.

Why does sense need a 240V breaker?

Although the Sense monitor only draws 4W, it must be installed on a 240V breaker for device detection purposes. Sense needs to monitor the voltage across both phases of your electrical system. Installing on a 240V breaker ensures that this is done correctly.

How can I monitor my whole house electricity usage?

How To Monitor Your Home Energy Consumption.Use Smart Plugs for Individual Appliances.Use a Whole-Home Electricity Monitoring Tool.Use Monitors With Appliance Recognition Features.Detect Vampire Loads.Use Energy Monitors That Connect to a Mobile App.Track Energy Usage Cost in Real-Time.More items...•

Does sense have a monthly fee?

No. There is only a one-time cost for the Sense Home Energy Monitor. Use of the Sense mobile and web apps is included.

How much is the sense app?

Sense offers an auto-renewing monthly subscription at $6.99/month and an auto-renewing yearly subscription at $59.99/year to provide you with unlimited access to the Sense collection of relaxing sounds, meditations, minfulness programm and recommendations.

How do you hook up sense Solar?

1:454:10Sense Install Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext plug the sensor cables into the outermost port of the sense monitor. The middle port is forMoreNext plug the sensor cables into the outermost port of the sense monitor. The middle port is for solar sensors. Finally plug the power cable into the power port onto the sensors.

How do you install a sense?

2:084:10Sense Install Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe black wire and red wire should connect to the empty breaker while the white wire connects to theMoreThe black wire and red wire should connect to the empty breaker while the white wire connects to the neutral busbar. Sense is now connected to power sense uses about 4 watts of electricity.

What is sense application?

Sense is an AI-driven hub, which automatically keeps files, documents, tasks, links, meetings, conversations, people etc. interrelated and organized; and defines what is the most important for the given moment of time.

How do you read Sense app?

1:312:51Sense App Demo | 1 of 4 | The Now Screen - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe bigger the bubble the more energy that device is using tap a bubble to see the exact wattage andMoreThe bigger the bubble the more energy that device is using tap a bubble to see the exact wattage and DoubleTap to see the detailed.

What is sense dedicated circuit monitoring?

Dedicated Circuit Monitoring is designed to monitor circuits dedicated to a single device. Using Dedicated Circuit Monitoring with a branch circuit can negatively affect detection for devices on that circuit and may result in inaccurate wattage or double counting.

Installing the Sense monitor – Sense

Note: The Sense Home Energy Monitor should be installed by an electrician or qualified professional, and should be installed in compliance with all applicable local codes. Installing Sense is very ...

How Does the Sense Home Energy Monitor Work?

The Sense energy monitor uses machine learning to detect individual devices and appliances by identifying their electrical signals. Sense tracks the energy usage of these devices and sends the information to its smartphone app via built-in Wi-Fi, giving you on-demand, real-time usage data.

How does a sense monitor work?

Types of Sense home energy monitors. Sense works by connecting a monitor to your home's breaker panel. It then takes the voltage and current measurements of your electricity consumption. It does this over 1 million times every second to produce high-resolution data.

How much is Sense Solar?

Sense Solar cons. Even more expensive than the standard Sense at $349.99, the Sense Solar monitor is definitely an investment. This particular home energy monitor is designed to help homeowners get the most out of their own solar panels.

What is the Sense app?

The Sense app is used to connect to their smart home energy monitors and provides the ability to monitor volts and current one million times per second.

What is a sense monitor?

Sense produces smart home energy monitors that allow users to track, in real-time, their energy usage throughout the home and even through specific appliances. The Sense home energy monitors are some of the most popular on the market today. Learn why in our review below.

Does Sense Solar work?

The Sense Solar uses the same simple interface for its smart phone function that the regular Sense does. Users can chart energy usage over time, even creating profiles of monthly, weekly, or daily usage, whatever works best for the user. It is recommended that only electricians handle the installation process.

Does Sense Solar track energy usage?

Sense. Like the Sense, the Sense Solar can track usage data in real-time. It can also track your appliances and devices on an individual basis to give you a more comprehensive window into your home's energy consumption.

How to connect a Sense monitor?

Connect the power cable, current sensors, and antenna to the Sense monitor. Be sure to insert the sensor into the outer port.

Where to install Sense?

Use the mounting bracket provided to install Sense at the top of your electrical panel or outside of the panel. See mounting bracket instructions here and then return to this guide.

How far can you reach the ATS panel?

You may need sensor cable extensions in order to reach the ATS panel, which can support distances up to 80 feet.

How to connect a generator sensor?

Using a flathead screwdriver, pry open the cap on the middle port of the Sense monitor. This will be used to connect the generator sensors.

How to avoid disrupting device detection?

Reattach each sensor to the same service main as before to avoid disrupting device detection. Be sure to place each sensor in the same orientation as before. Failure to do so may result in data inaccuracies.

How far can a sensor extender be?

Contact customer support to get sensor extension cables, which can support distances up to 80 feet.

How long does it take to hear a breaker?

Once the panel is closed, turn the main breaker back on, and listen for one of the sounds listed below. It will take about a minute before hearing a sound. Visit help for sound samples and troubleshooting information.

How to connect Sense monitor to home network?

The app will initially connect to the Sense monitor using Bluetooth, so you’ll need to be close to the electrical panel and make sure you have Bluetooth enabled on your device. The Sense app will automatically find your Sense monitor and walk you through the steps of connecting to your home’s wireless network. Once your Sense monitor is installed, you can also access your data directly from your desktop web browser via the Web App.

How does a sense monitor work?

The Sense monitor is the brains of the operation. It collects and sends data through your home's Wi-Fi so you can track your energy use from anywhere on your smartphone or computer. A qualified electrician can install the Sense monitor in your electrical panel without any rewiring, and usually in less than 30 minutes.

Who should install Sense?

We take data science seriously. We take live electrical panels even more seriously. Seriously. The safest route is for a licensed electrician to do the install. They have the training to safely open the panel, add a new circuit breaker where needed, and complete the installation.

How to find a qualified electrician?

A trusted electrician is like a good car mechanic, or a dentist you really like. Once you find the right pro , you’ll know you can count on them whenever the need arises. And while there are no special qualifications needed to install Sense, you’ll still need to want to feel comfortable with whoever you choose. So here are some ways to find an electrician:

How does the Sense app work?

The Sense app will automatically find your Sense monitor and walk you through the steps of connecting to your home’s wireless network. Once your Sense monitor is installed, you can also access your data directly from your desktop web browser via the Web App.

How often does a smart meter take readings?

Even if your electric company has installed a "smart meter " in your home, these usually only take readings once every 15 minutes. The Sense monitor collects millions of ...

How long does it take for Sense to detect a device?

While Sense can't detect every device in your home, it's always learning about new devices as more Sense monitors are installed in more homes, so it will keep discovering more and more devices in the months and years to come. In the meantime, be sure to check out our integration with smart home products like Philips Hu e and smart plugs from TP-Link and Belkin. Not only will these give you control over connected devices in your home, but they'll also provide instant detection of those devices.