6 Easy Steps to Install Allure Vinyl Plank Flooring
- Step 1: Prepare the Work Area Allure vinyl planks, like most floating floors, can be installed on any subfloor including concrete, hardwood, tile, or even existing vinyl flooring. ...
- Step 2: Plan Your Installation ...
- Step 3: Lay the First Plank ...
- Step 4: Complete the First Row ...
- Step 5: Install the Rest of the Planks ...
- Step 6: Finish Up ...
Full Answer
Who manufactures Trafficmaster flooring?
TrafficMaster produces residential, commercial, indoor, and outdoor flooring products. TrafficMaster is manufactured by Shaw Industries, Inc. and the TrafficMaster line is distributed exclusively through Home Depot Stores. Also, is TrafficMaster carpet any good? Good value: Home Depot makes and sells the carpet.
What is the best luxury vinyl flooring?
- BEST OVERALL: Shaw Primavera Bayou Luxury Vinyl Plank Flooring
- BEST BANG FOR THE BUCK: TrafficMaster Edwards Oak Luxury Vinyl Plank Flooring
- BEST KITCHEN AND BATHROOM: NuCore White Pewter Rigid Core Luxury Vinyl Plank
- BEST NARROW PLANK: COREtec Plus 5″ Waterproof Vinyl Planks
- BEST OVERSIZE PLANK: Pergo Extreme Wider Longer – Toasted Peanut
How to cut LifeProof luxury vinyl plank flooring?
Method 2 of 3: Scoring and Snapping Smaller Pieces
- Lay your vinyl flooring flat on the floor or table. ...
- Place your framing square along the line you want to cut. Use your non-dominant hand to apply pressure to the top of your framing square.
- Use a utility knife to cut halfway through your vinyl plank. ...
- Flip your board over and secure it with your knee. ...
How thick is allure ultra vinyl plank flooring?
The Allure and Allure Plus lines have a 4 mil and 5 mil (respectively) wear layer. Another difference is the plank and tile sizes. Allure and Allure Plus have LVP that measure 36-inches long and have 4- or 5-inch width options. Allure Ultra planks are 47.5-inches long and 7.5-inches thick.
How long does it take to install Allure vinyl planks?
If your subfloor is flat, smooth, and in good shape, you can literally have your planks installed in just a few hours.
How long does it take for Allure vinyl flooring to get rid of the smell?
Wear a mask to avoid inhaling your floor’s ‘new smell’ and keep the room well ventilated for the first one week after installation to quickly get rid of the smell. Sure, Allure vinyl planks may be low in volatile organic compounds, but no vinyl flooring is 100% non-toxic.
How to seal seams on a floor?
Get a larger floor roller and move it back and forth across the floor. This will help press down and smooth the seams so they can form a tight seal.
How to make a tight bond between planks?
Use your hand to press the plank down on the joint so the grip strips can create a tight bond. Follow this up with a hand roller for a tighter, better bond.
What is the best way to check for moisture in a subfloor?
Moisture meter: Use this to check your subfloor for moisture especially if it is made of concrete.
How to lay a second panel?
Lay the second panel, holding it at 45°, and position it such that its top edge rests over the bottom edge of the previous panel. Adjust the plank so it attaches firmly to the first one and creates a tight seam.
What do you use to mark where you need to cut?
Pencil: Use a pencil or erasable marker to mark where you need to cut.
How is TrafficMaster Allure Flooring constructed?
TrafficMaster Allure is a laminate vinyl flooring meaning that it is constructed in layers.
How many grades of Allure vinyl are there?
As mentioned above there are three grades of Allure luxury vinyl. However, it is worth noting that when you search on the Home Depot site, it is not always immediately clear which grade you’re looking at. The key is in the wear layer: Allure and Allure Plus have a wear layer of 4 mil, while Allure Ultra has a wear layer of 12 mil.
What is Allure flooring?
Before getting into the details of its construction, Allure is TrafficMaster’s affordable luxury vinyl plank and vinyl tile flooring. It is a private-label floor made for and sold primarily at Home Depot. This cuts out layers in the retail chain and the cost increases that accompany them.
What is the commercial wear layer of Allure Ultra?
Commercial wear layer: The 12mil commercial-grade wear layer of Allure Ultra should keep the flooring bright and resistant to scratch marks for many years. Low VOCs: This means it won’t contribute to indoor air pollution and shouldn’t cause problems for anyone with breathing issues.
How wide are allure planks?
Allure and Allure Plus: Planks are 36” long. Most are 5” or 6” wide with a wear layer of 4 mil. Currently over 30 different styles available, though availability depends on what your local store stocks. This large selection of styles means there are all possible iterations of wood look vinyl planks – for example 9 different Oak planks ranging in ...
How much does LVT cost?
Low cost: Many leading brands of LVT and LVP cost $3.00 to $5.00 or more per square foot. Affordability means you can replace old flooring on a budget whether to enjoy yourself or spruce your home for resale.
What wood look vinyl planks are there?
This large selection of styles means there are all possible iterations of wood look vinyl planks – for example 9 different Oak planks ranging in color from white washed to dark gray, several different Maple planks, and a whole host of other wood species such as Elm, Ash, Chestnut, Rosewood, Cherry, Teak, as well as some planks based on non-specific wood species with names such as African Wood or Sunburst Honey Locust.
TrafficMaster Allure vinyl floor install
For those of you that have installed this flooring, I have a question... I plan on installing this in a hallway leading into the living room. I was going to put it in the hallway to see how it looked, then if I liked carry it into the living room.
Comments (66)
1) We used the double stick tape all the way around the room....seemed to keep things from slipping as we laid the strips. Don't know if it's necessary--but it was certainly helpful.
