Identify Model Number
- In this example, the model number is 4636 and the color code is 00: Cachet Quiet-Close in white.
- The model number can also be obtained by scanning the QR code.
- To locate the model numbers for other toilet seats, see the product package or your sales receipt. Call the KOHLER Customer Care Center at 1-800-4KOHLER (1-800-456-4537) for more assistance.
How do you measure a toilet seat?
How to Measure Toilet Seat 1 Grab a tape measure or long wooden ruler (at least 20 inches). 2 Locate the holes where the seat is bolted into the toilet. 3 From these bolts, measure directly down the center to the front of the bowl. More ...
How do I identify my toilet?
Three things are needed in order to identify your toilet: 1.The brand 2.The number 3.The color. The brand: Look under the water tank lid (on the bottom); on the inside walls of the tank; on the bowl between the bolts attaching the seat. Disregard names on the seat as they are seldom the same brand as the toilet.
How do I find the model number of my cachet toilet seat?
The seat must be removed from the toilet to view the model number. In this example, the model number is 4636 and the color code is 00: Cachet Quiet-Close in white. The model number can also be obtained by scanning the QR code.
What size toilet seat do I Need?
Start by measuring the seat from back to front. Buy a standard round seat if the length is around 16 in (41 cm). If it's around 18 in (46 cm) long, go with an elongated seat. Things get a little more complicated if your toilet is old or if you’re investing in a specialty seat.
Do all toilet seats fit all toilets?
Do all toilet seats fit the same? No, not all toilet seats fit the same because toilets come in a variety of different shapes, so you'll need to check yours before buying. There are three types of toilet shapes commonly found in UK homes. These are round, D-shape, and square seats.
Where is model number on toilet seat?
All toilets have model numbers which are typically located on the underside of the tank lid.
How are toilet seats measured?
Using a tape measure, determine the distance between the center of the mounting holes in the back of the toilet. The standard measurement for this distance is 5 ½”, with a midpoint of approximately 2 ¾”. Place the hook of your tape measure at the midpoint and measure to the outside edge of the toilet bowl rim in front.
What is the most common size toilet seat?
The most common toilet seat size is known as an elongated toilet seat. They are characterized by the long oval shape and corresponding elongated dimensions (19-22 inches in length, 13-15 inches in width).
How can I tell what color my KOHLER toilet seat is?
Identifying Your Toilet Seat ModelKOHLER plastic toilet seats have a KOHLER logo molded into the bottom of the toilet seat ring.As of October 2019, most KOHLER plastic toilet seats have the model number and color code printed on the underside of the toilet seat hinge.More items...
Do KOHLER toilet seats fit American Standard toilets?
Chruch, Olsonite and Bemis all fit Kohler, American Standard, Eljer normal-style toilets. Typically the brand of the seat is not the brand of the toilet. Exceptions are some seats from Kohler and American Standard toilets which are branded Kohler or American Standard.
Is there a standard toilet seat size?
Typical round length: 16" - 17" Typical elongated/extended length: 18" - 19"
What are the different types of toilet seat fittings?
Types Of Toilet Seat Fittings There are two types of toilet seat fixings: Bottom Fixings and Top Fixings. Top fixing toilets seats work by feeding two bolts into the pan which are then tightened from the top. Bottom toilet seat fixings are fitted from the top and then tightened from underneath, often with wing nuts.
How do I know if my toilet seat is round or elongated?
Toilet seats are sold by shape (not by length). If the length is between 18-19.5 inches, you have an elongated toilet bowl seat. If the length is between 17-17.75 inches, you have a round toilet bowl seat. Notice also that the elongated bowl is shaped more like an oval (egg-shaped).
How many types of toilet seats are there?
2There are 2 main types of toilet seat: standard close and soft close.
Does toilet seat have to match toilet?
Compatibility. As a general rule, match elongated seats to elongated toilets and round-front seats to round-front toilets. However, before you make your final choice, you will want to be certain that your toilet seat is compatible with your toilet in terms of size, style and color.
Are elongated toilet seats a standard size?
Elongated toilet seats measure about 18.5 inches long and about 14 inches wide. Elongated toilet seats are preferred by many, especially men, because of their extended size. Because of its popularity, this is the seat that is standard in most large businesses such as hotels, gas stations, and airports.
Where is the model number on a Bemis toilet seat?
If you have the original packaging, your toilet seat's model number can be found on the outside of the box. If you do not have the original packaging, please call our Customer Service at 888.722. 6488 and they will help you determine what model number your seat is.
Where is the model number on a Glacier Bay toilet?
A Glacier Bay toilet model number is located on the bottom of the tank. There are two different types of Glacier Bay toilets available, a one-piece and a two-piece. The two-piece models have the same model number on both pieces.
How do you replace a Kohler one piece toilet seat?
0:011:12Installation - Quick-Release Toilet Seats - KOHLER - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor this project you'll need a flat blade or Philips screwdriver first insert the tabs into theMoreFor this project you'll need a flat blade or Philips screwdriver first insert the tabs into the notches on the back of the seat with the plus sign facing the front of the bowl.
Where is the model number on a Gerber toilet?
The model number for Gerber toilet tanks is located on the back wall inside the tank, near the water line. You will also be able to find cast date and the bar code and serial number (D & S Code).
Is there a standard size for toilet seats?
Round toilets are around 16-17 in (40.6 - 43.2 cm) from the center front of the bowl to the center of the hinges, while elongated toilets are aroun...
How do you know if a toilet seat is matching?
Take 3 specific measurements of your toilet. First, measure between the bolt holes, from center to center. Then, measure the width of the toilet bo...
How far apart are toilet bolts?
Toilet bolts are usually 5.5 in (14 cm) apart. You can find them on the back of your toilet seat.
How to measure for a replacement toilet seat?
To measure your toilet for a replacement seat, hold one end of a measuring tape to the bolts that secure the back of the seat to the bowl. With the end of the measuring tape in place, draw the tape to the very tip of the bowl and note the seat’s length on a piece of paper.
How far apart are toilet bolts?
Toilet bolts are usually 5.5 in (14 cm) apart. You can find them on the back of your toilet seat.
How to measure the width of a toilet?
First, measure between the bolt holes, from center to center. Then, measure the width of the toilet bowl at its broadest point. For your final measurement, measure the length of the toilet from the center front of the bowl to the center front of the hinges.
How to measure toilet seat size?
These days, toilet seats come in standard sizes, but measuring your seat before buying a replacement is still wise. Start by measuring the seat from back to front. Buy a standard round seat if the length is around 16 in (41 cm). If it's around 18 in (46 cm) long, go with an elongated seat. Things get a little more complicated if your toilet is old or if you’re investing in a specialty seat. However, regardless of your situation, you should have no trouble measuring your seat and choosing the best replacement!
How to measure bolts on a car seat?
If flaps cover the bolts and you haven’t lifted them, pry them up with your fingers or a flat-head screwdriver. Then measure the bolt spread, or the length between the centers of the mounting bolts.
How to measure seat length?
1. Measure the seat’s length from the bolts to the front. Hold one end of a measuring tape to the bolts at the back of the seat that secure it to the bowl. Draw the other end of the tape to the very tip of the front of the bowl, then note the seat ’s length. [1] X Expert Source Eric Shipe.
How long is a round toilet seat?
In the U.S., modern seat sizes are standardized. If your seat is between 16 and 17 in (41 and 43 cm), it’s round. More likely than not, you can just look for a round seat at the hardware or home improvement store and it’ll fit your toilet.
How Do I know if My Toilet Seat is Round or Elongated?
To replace a toilet seat, you must first know the type and size of toilet you already have. This is easy for plumbers who don’t even have to measure anything but a homeowner will need to measure to be sure.
What does it mean when a toilet bowl is elongated?
This means that a big part of the toilet seat will not be supported. The moment you sit on it you will ether fall off or it will snap.
How to loosen a toilet seat bolt?
Use a Philips screwdriver to turn the toilet seat bolts counterclockwise to loosen them. As you are likely to find out, the bolt will start spinning instead of loosening. In that case what you should do is back off the nut underneath the bowl using a wrench.
What is the difference between a round and an elongated toilet seat?
Round toilet seats as their name imply have a round or circular front. Elongated toilet seats on the other hand are oval shaped.
What is the difference between a plastic toilet seat and a wooden toilet seat?
Wooden toilet seats are stylish, warmer, but they scratch and/or break easily. Plastic toilet seats don’t break that easy but are relatively colder to sit on.
How long is an elongated toilet?
Elongated toilets are usually about 18.5 inches in length. If you measure and get between 18 and 19.5 inches then you have an elongated toilet seat.
How many inches is a round toilet seat?
Since toilets and toilet seats have small differences in size and also accounting for your accuracy, you are likely to get between 16 and 17.5 in ches for a round toilet seat.
What is an elongated toilet seat?
Elongated Toilet Seats: Just like the name indicates, elongated toilet seats feature an oval shape and are slightly longer than traditional round seats. This type of toilet seat is considered to be more comfortable by many users, but often cost a bit more.
What are the most common toilet seats?
Of course, while plastic and wooden toilet seats are the most common types you’ll be considering, this buyer’s guide would be incomplete without mentioning the other types of materials available. These include:
What are the different types of toilet seats?
Of course, while plastic and wooden toilet seats are the most common types you’ll be considering, this buyer’s guide would be incomplete without mentioning the other types of materials available. These include: 1 Ceramic 2 Stainless Steel 3 Vinyl 4 Brass
What happens if a toilet seat doesn't fit?
If it doesn’t fit properly on your toilet, you’ll end up having to send it back and find a new one anyway. The main thing to be aware of regarding compatibility has already been discussed: the difference between elongated and round toilet seats.
How long does it take to install a toilet seat?
The vast majority of toilet seats will be fairly easy to install, and shouldn’t take you more than half an hour to complete. This is especially true if you’re planning on buying a toilet seat on the lower end of the price spectrum. All it just takes is a few bolts and a little elbow grease.
Why do toilet seats get heated?
A heated toilet seat is designed to solve this problem for you, keeping your seat warm and cozy.
Which is more comfortable, a round or elongated toilet seat?
As previously mentioned above, the shape of your toilet seat plays a rather large role in determining how comfortable it is to sit on. Elongated seats are considered more comfortable than round ones. But, this will likely vary from person to person.
What is celite toilet bowl?
A: Celite is a South American manufacturing plant which has supplied component parts over the years to various American import brands such as St. Thomas Creations, Barclay Products Limited, Laufen (Burgess), and most recently Cheviot. Toilet bowls with the Celite logo on them were actually sold under another brand name.
How to identify a toilet?
Three things are needed in order to identify your toilet: 1.The brand 2.The number 3.The color. The brand: Look under the water tank lid (on the bottom); on the inside walls of the tank; on the bowl between the bolts attaching the seat. Disregard names on the seat as they are seldom the same brand as the toilet.
What does UPC stand for?
Q: What brand is UPC. A: UPC stands for Uniform Plumbing Code, a governing body by which plumbing fixture standards are set. It is not a brand. The UPC stamp merely means that your product meets the code.
Where is the toilet model number?
The number: Look under the water tank lid (on the bottom), or on the inside walls of the tank.* The number on the lid may or may not be the same as the in the tank or the number of the complete toilet model.
Do toilets have numbers?
Some toilets have no markings or numbers on them and we cannot supply parts for those units.
How to tell if toilet tank lid is replaced?
Carefully remove the toilet tank lid and set it gently on the floor, with the bottom facing up. Look for the manufacturer name or a number on the bottom side of the water tank lid. It may be stamped into the lid or painted on - some of them may even be handwritten if the tank lid was replaced by a plumber with foresight.
How to clean the inside of a porcelain tank?
Sometimes you can take a cloth ( don't use your hands in case of rough spots on the porcelain) and wipe the inside back of the tank. This doesn't really clean the back of the inside of the tank, but it will leave dirt in the crevices or indentation where the number is located, helping you to find it and/or make it easier to read.
Where to find the manufacturer name on a water tank?
Most often you'll find a manufacturer name or number (either stamped or painted with waterproof paint) above the water line , but some of them are below the water line or behind the fill valve. Take your time and hold the flashlight at an angle to help you better see any stampings. Some manufacturers actually stamp the number into the very bottom of the tank, so be sure to look straight down into the tank too.
Where is the model number on a toilet?
Note that a large number of modern toilets feature the manufacturer's name in small print on the bowl between the bolts attaching the toilet seat (but disregard any names printed on the seat itself since they usually aren't the same brand as the toilet!) - which can at least set you on the right track toward finding your model number, either by contacting the manufacturer or using one of our toilet picture pages.
Do Universal Rundle toilets have the same model number?
*Please note: Different Universal Rundle series toilets may share the same model number. Please double check the model number and date stamp in your toilet and cross reference that with available pictures and diagrams prior to ordering to ensure you're getting the correct parts.
What is a padded seat?
If you’re looking for that bit of extra comfort in your seat, especially if the user is vulnerable to pressure sores or has arthritis, then a padded raised seat might be for you. Our padded seat (34060) has simple hook and loop attachments, meaning it is easy to take off and can be transported. For something more luxurious, then the Harley Raiser (50506) is for you. All padded seats are very easy to clean with soapy water and disinfectant.
What does it mean when a toilet seat is raised?
A regular raised toilet seat usually means that the pan is oval shaped like a standard seat, it just offers that bit of a raise for individuals that need support when sitting and standing.
How to measure the height of a toilet seat?
1. Firstly, measure the distance from the floor and just above the back of the knee. 2. Next, you need to measure the current height of the toilet seat from the floor upwards. 3. Finally, you need to subtract the measurement of the height of the toilet from the measurement of the user's leg.
What size is a raised toilet seat?
Raised toilet seats tend to come in three standard sizes, 2", 4" and 6". If the toilet seat is too low, the legs are bent and the knees are not level with the hips – this can cause an uncomfortable posture if the user has difficulty sitting and rising. 1.
Does the Novelle seat have a bowl?
If you need a more portable seat that is easy to clip on and off, the Novelle (34387) has no brackets and fits onto the existing seat rather than the bowl, making it convenient for use when travelling. A contract seat such as the Ashby (30731) is ideal for use in more public places like NHS hospitals and care homes, as the seat is fully sealed underneath, which makes it easier to clean and reduces cross-infection as there is no hollow underside.
