Pet Ramp
- Gather Tools and Materials
- Cut the Wood. The first set of cut wood is pictured on step 1. All of those require 2 of each piece. ...
- Assemble the Wood. Begin by laying out your two halves of the ramp making sure you have the pieces cut correctly and that they all fit.
- Install the Carpet. First, lay the carpet shaggy side down and nail down one side. ...
- Test the Ramp. Make sure the pet can move up and down the ramp easily. Notice that my measurements made the ramp fit exactly.
How to build an extra wide dog ramp?
- For an average ramp, cut 2 boards 23 1⁄2 in (60 cm) long and 3 1⁄2 in (8.9 cm) wide. These will form the short ends of the base.
- The longer ends of the base should be of a similar length to the ramp. ...
- For additional stability, get 2 runner boards to attach to the longer base boards. ...
How do you build a pet ramp?
- Draw a plan. The most common and easiest is an L ramp (see picture).
- Buy the materials. Measure where the ends will go.
- Build the frame of the ramp.
- Cover the plywood.
Does your dog need dog stairs or a ramp?
If your dog is healthy and not a senior dog with ailing joints, either ramps or stairs can be a great choice. There is no need to debate between ramps vs. dog stairs. If, however, your dog has trouble climbing stairs or doing so leads to pain, a ramp is the better option. Older dogs and those with joint problems tend to prefer ramps.
How to train your older dog to use a ramp?
The Rapid Training Method
- Start by laying the ramp in a convenient location in your home. From this point on, your job is to completely ignore the ramp.
- It won't take long before your pup starts to check out the new ramp from a distance.
- Now place a few treats on the ramp in such a way as he has to get on the ramp to get them. ...
How do you make a simple pet ramp?
How to make a dog rampStep 1: Measure and cut the plywood. ... Step 2: Measure and cut the brass threshold. ... Step 3: Measure and cut the side trim pieces, then nail them in place. ... Step 4: Glue down the carpet and let dry. ... Step 5: Attach the metal threshold, add rubber feet, and you're done!
What can you make a dog ramp out of?
Super DIY Dog Ramp We used some scrap studs, plywood, and carpet (from a renovation years ago) to build this. I borrowed a circular saw and a drill.
How do you make a dog ramp step by step?
2:053:17Quick and Thrifty Ways to Build a Dog Ramp and Steps - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd screwed it into the crate. Then we cut the mat to size and stapled it onto the steps for gripMoreAnd screwed it into the crate. Then we cut the mat to size and stapled it onto the steps for grip and to prevent getting any slivers in the dog's paws.
Do It Yourself DIY dog ramp for bed?
Cut a 1x10 board to the length of the distance between the edge of the top crate and the floor. Attach a door hinge using the provided hardware on the center of one end of the board. Set the remaining hardware off to the side. Next, wrap the board in a small rug for added traction and style.
How do you make a cheap dog ramp?
1:144:32'On The Fly...DIY' Dog Ramp - YouTubeYouTubeStart of suggested clipEnd of suggested clipSaw you'll need two two by fours cut at 48 inches 14 1 by fours cut at 16 inches. One two by fourMoreSaw you'll need two two by fours cut at 48 inches 14 1 by fours cut at 16 inches. One two by four cut at 13 inches two two by fours cut at 16 inches. These are the legs.
Are stairs or a ramp better for dogs?
Should I get stairs or a ramp for my dog? Stairs are a good choice for dogs that have the agility and balance to use standard household stairs. Many are portable and can be moved from sofa to bed to car. They also tend to take up less floor space than ramps.
How do you make a simple ramp for stairs?
0:2012:19Build A Handicap Access Ramp -- Not Hard At All - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor this project we're literally gonna build a simple handicap ramp for these stairs you can seeMoreFor this project we're literally gonna build a simple handicap ramp for these stairs you can see it's pretty pretty tall.
How steep should a dog ramp be?
Here are some general guidelines: Ramp width should be about 11-12 inches for toy and small dogs, and 22-24 inches for medium size breeds. Rise of the ramp should allow an angle of incline at roughly 18 to 25 degrees. A toy or small dog will need 18-20 degrees and a medium size dog 22-25 degrees.
Can you turn stairs into a ramp?
Building a ramp over existing steps is a straightforward project you can complete during a weekend to allow wheelchair access into a house. You'll need plywood sheets and sturdy wooden posts to construct a strong, reliable ramp. Anchor the ramp over the stairs using 4-inch screws.
How do you make a dog ramp out of cardboard?
0:041:21Build Your Own Pet Stairs With Cardboard Boxes And TapeYouTubeStart of suggested clipEnd of suggested clipAll you know run the tape all the way around it tape the entire thing put pieces of cardboard on theMoreAll you know run the tape all the way around it tape the entire thing put pieces of cardboard on the side.
How do you make an outdoor ramp for a dog?
1:314:39DIY Outdoor Dog Ramp : Simple Build : Dachshund Ramp - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe had jack russell's uh she broke her leg. And we had i had to build a ramp similar to this and we'MoreWe had jack russell's uh she broke her leg. And we had i had to build a ramp similar to this and we're going to kind of show you a way to kind of train them to kind of go up this ramp uh using treats.
How do you make a dog ramp out of a pallet?
Start by deconstructing your pallet. ... Measure the width and length of your stairs. ... Cut your pallet pieces to fit the width of your ramp. ... Screw in your support pieces. ... Staple your artificial turf onto the top of your ramp. ... Nail in your moulding pieces for the low profile ramp steps.More items...
How do you make a dog ramp out of cardboard?
0:041:21Build Your Own Pet Stairs With Cardboard Boxes And TapeYouTubeStart of suggested clipEnd of suggested clipAll you know run the tape all the way around it tape the entire thing put pieces of cardboard on theMoreAll you know run the tape all the way around it tape the entire thing put pieces of cardboard on the side.
How steep should a dog ramp be?
Here are some general guidelines: Ramp width should be about 11-12 inches for toy and small dogs, and 22-24 inches for medium size breeds. Rise of the ramp should allow an angle of incline at roughly 18 to 25 degrees. A toy or small dog will need 18-20 degrees and a medium size dog 22-25 degrees.
How do you make a portable ramp?
0:2419:38DYI How to Build a Wheel Chair Ramp that's Removable (Complete Guide)YouTubeStart of suggested clipEnd of suggested clipYou are going to need. One 2 by 6 by 12 foot that's this over here and then you're going to need uhMoreYou are going to need. One 2 by 6 by 12 foot that's this over here and then you're going to need uh one eight foot five quarter by six and one 12 foot five quarter by six right here for the planking.
How do you make a dog ramp out of a pallet?
Start by deconstructing your pallet. ... Measure the width and length of your stairs. ... Cut your pallet pieces to fit the width of your ramp. ... Screw in your support pieces. ... Staple your artificial turf onto the top of your ramp. ... Nail in your moulding pieces for the low profile ramp steps.More items...
Are Ramps or Stairs better for Dogs?
Ramps and stairs are both great options for aiding your pet’s mobility across elevated stairs, couch, bed, or walkways. What works ideally will dep...
How Do You Make an Outdoor Dog Ramp?
An outdoor ramp is more or less like your indoor bed ramp or the one your dog uses on the staircase. Cut out a 4*4 piece of plywood (standard, but...
How Steep Should a Dog Ramp Be?
The proper inclination of your ramp depends on the size of your pet. According to veterinarians, a standard ramp should incline at between 18 and 2...
How Do You Make a Simple Ramp?
Cut out a 3-5 feet long plywood, with a length of 11-12 inches for a small dog or 22-24 inches for medium-sized breeds. Attach equidistant steps us...
Why do you need a ramp for a dog?
Or perhaps your dog is in a canine wheelchair, or is otherwise disabled and can’t navigate steps easily. Whatever the reason, ramps are a great mobility solution for your four-legged buddy.
Why is the dog ramp from Make Something so awesome?
This dog ramp from Make Something is awesome because it can double as storage space! However, it will definitely need to be made by someone with some experience using heavy woodwork machinery.
Can you buy a dog ramp?
We’re highlighting a few of the best DIY options around. And if none of these are a perfect fit, you can always purchase a dog ramp. While some are quite fancy and on the expensive side, others are quite affordable.
What is a dog ramp?
Dog ramps are excellent mobility aids for disabled, arthritic, old, or any other pets that need help climbing up raised beds, cars, couches, or even into their heavy duty crate to catch some sleep. They come in varying styles, designs, and colors and may sometimes from various materials.
How wide is a dog ramp?
Measure and cut your plywood. It acts as the base of your ramp. A standard ramp often measures 11-12 inches wide for small dogs and 22-24 inches for medium-sized breeds, but you can use your carpet size or preference to come up with the width.
How to protect a ramp from moisture?
Add equidistant steps using wood casing on the ramp and paint it to protect the ramp from moisture
How to make a dog bed with carpet?
Cut out a 3-5 feet long plywood, with a length of 11-12 inches for a small dog or 22-24 inches for medium-sized breeds. Attach equidistant steps using wood casing and paint to control moisture. After that, glue some carpet pieces on every end of the wood casings to provide comfort for your dog. You can adjust the size of plywood to match your needs or use your carpet pieces to come up with width.
Why do dogs need ramps?
Both ramps and stairs can ease the mobility of your pets. However, it narrows down to why your dog or cat needs the assistance, alongside other factors. Ramps, for example, offer more flexibility and are a great choice if your pet is injured, aged, disabled, or suffering from arthritis.
What to do if your dog has a height phobia?
Consider a ramp if your pet suffers long-term height phobia.
Is a dog ramp better than stairs?
A Pet ramp is a better choice where comfort is a concern since the inclined surface doesn’t strain your dog’s joints compared to stairs. Similarly, most of them are foldable, making them easy to store. Moreover, the adjustable dog ramps are efficient for use by different dogs and pets of varying heights. As such, even your cats can access the elevated walkways, high vehicles, and other raised structures.
Step 1: Gather Tools and Materials
Wood List: (Please see pictures for drawings of wood lengths) - Approximately 15 feet of 1/2 plywood at 2 inch width - One 5 inch section of 2x4 or scrap wood - 32 inch by 10 inch piece of 1/4 inch plywood Carpet List: -Any thick carpet (the shaggier the better for grip) approximate length at 50 inches and width of 10 inches Tools List: - Hammer - Nails - Table Saw (for 2 inch width pieces) - Circular Saw - Wood glue - Pencil.
Step 2: Cut the Wood
The first set of cut wood is pictured on step 1. All of those require 2 of each piece. The Wood cuts on this page only require 1 piece of each.
Step 3: Assemble the Wood
Begin by laying out your two halves of the ramp making sure you have the pieces cut correctly and that they all fit. Assemble the two halves individually with a small amount of wood glue and small finishing nails. Secondly, install the 8.5" cross members with glue and nails.
Step 4: Install the Carpet
First, lay the carpet shaggy side down and nail down one side. You may need to trim the corners of the carpet so that it fits better. Finally, pull and stretch the carpet to the other end and nail it down.
Step 5: Test the Ramp
Make sure the pet can move up and down the ramp easily. Notice that my measurements made the ramp fit exactly. Its the width of their ottoman and height of the couch.
But why a dog ramp?
Why can’t she just use stairs, you may ask? Ella, while almost 10, has the pep in her step of a much more youthful pup, but she’s also been plagued with a shaky knee that slides in and out of socket for much of her adult life. Her vet regularly monitors it and said unless it seems to be hurting her, then we should just let it be.
Then, we moved to the Cedar House
I’m not going to lie: When we started looking at houses 18 months ago, one of the parameters was a ranch-style home. We wanted a single story both for our own ease, but also mainly for Ella’s. I mean, she’s our child and top priority—we’ve got to be looking out for her, right? So the Cedar House seemed like a perfect fit from every angle.
Materials for a dog ramp
SVV had been saying for the past year that we needed to build a dog ramp, then last week, we saw a friend on Facebook doing something similar for her senior dog and immediately dropped everything and followed suit.
How to make a dog ramp
Now that you’ve got your materials and your tools all laid out in your makeshift shop, here’s how we built our own dog ramp, no blueprint or prototype needed.
So, the real question: How does Ella like her dog ramp?
The first time we put it down for Ella to use, what did she do? Have the confidence to finally use that single stair, but of course! In fact, she acted as if she’d never had a problem with the stair in the first place. *face palm*
