- Determine window dimensions. The dimensions of my standard height French Door with Sidelights, on which all my measurements and instructions are based, are listed below. ...
- Pin folded fabric or pre-made curtain panels together. Work on one panel at a time following these instructions. ...
- Cut curtain panels to size. With very sharp fabric scissors cut along your line as shown below. ...
- Apply interfacing to curtain hem area. OPTIONAL – Interfacing will stiffen the bottom edge of the finished panel and help them hang nicely. ...
- Sewing your curtain panels. Sew a standard 5/8″ seam on two of the long sides and a 2″ seam on short side that has the interfacing. ...
- Sewing the curtain panel rod pockets. Turn the rough edges of the unstitched top end down 5/8″ and iron. This is the start of the rod pocket. ...
- Hanging your new DIY French Door Curtains.
How to hang French doors with curtains?
If you are hanging the French door curtains above the doors, measure the width of the French doors plus 2 inches on both sides for a total of 4 inches. If hanging the curtains to cover the panes of the doors, measure the width of the pane of the glass and add 1 inch to each side for a total of 2 inches. Step 3 – Curtain Rods
How do you measure for curtains for French doors?
If you are hanging the French door curtains above the doors, measure the width of the French doors plus 2 inches on both sides for a total of 4 inches. If hanging the curtains to cover the panes of the doors, measure the width of the pane of the glass and add 1 inch to each side for a total of 2 inches.
How to sew curtains on a front door?
If you want to sew a single layer panel (which is definitely the easiest), look for a fabric that is attractive on the reverse side as well as the front if it will be visible on both sides of the door. Choose your fabric accordingly. You may also consider lining your curtain panels if you can see the fabric on both sides of the door.
How to choose curtains and curtain rods for French doors?
If hanging the curtains to cover the panes of the doors, measure the width of the pane of the glass and add 1 inch to each side for a total of 2 inches. With measurements in hand you can now purchase the right curtains and curtain rods for the French doors. If your curtains will be hanging down from the wall, you will only need one curtain rod.
What kind of curtains do you put on French doors?
DO use full-length curtains over your French doors. For maximum coverage, you want to make sure your curtains extend to the floor. DON'T skimp on curtain width. Make sure your curtains completely cover the doors when they're closed.
What size curtains do you need for French doors?
Standard fullness: Curtain width two times that of your French door's width. Deluxe fullness: Curtain width two and half times that of your French door's width. Maximum fullness: Curtain width three times that of your French door's width.
How do you roll up French door curtains?
0:000:39Dani Designs Co French Door Curtain Folding Instructions - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is the demo of folding the French door curtain in the French door fold. I start about two-MoreThis is the demo of folding the French door curtain in the French door fold. I start about two-thirds of the way down slip it through my fingers. And hold it right below the balance part right here.
How do you make curtains for a door window?
0:543:52Create quick rod pocket curtains - YouTubeYouTubeStart of suggested clipEnd of suggested clipFrom the top of the curtain rod to the floor or below the window casing if shorter curtains are yourMoreFrom the top of the curtain rod to the floor or below the window casing if shorter curtains are your preference to the length measurement add 12 inches cut panels the length determined.
What is the best window covering for French doors?
As one of the best window treatments for privacy on French doors, Roman shades are made of fabric and are ultimately nosy neighbor-proof. Like cellular shades, Roman shades do not interfere with the door handle operation—although, they too operate via a cord system.
Do people put curtains on French doors?
You can hang curtains on French and patio doors the same way as you do with curtains hung at windows, outside of the frame, so that the curtains can be pulled right back from the frame to reveal the entire width of the doors.
How do you make roll up curtains?
0:053:51DIY - Roll Up Blinds, how-to - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat we will use is a bamboo mat large enough to fit your window. Some cable ties a big piece ofMoreWhat we will use is a bamboo mat large enough to fit your window. Some cable ties a big piece of rope some screw eyes a wooden beam and a wooden pole or plastic coil in my case.
How do I make folded curtains?
1:546:09DIY How To Pleat Curtains – Fan Fold Drapes | Galaxy Design Video #188YouTubeStart of suggested clipEnd of suggested clipAnd sort of start creating some folds from the very top I want to do this to make sure that theMoreAnd sort of start creating some folds from the very top I want to do this to make sure that the lining that's on the back of your increase is not being separated from the front layer.
How do you install French door panels?
0:406:29French Door Curtains - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll right and it's a double-sided velcro tape uh you put it on the top of it and make sure it linesMoreAll right and it's a double-sided velcro tape uh you put it on the top of it and make sure it lines up correctly. So it could drop down in the bottom.
How do you make easy pull up curtains?
0:234:46Creating A Simple Roman Shade To Roll "Up" Panels - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe male snaps on a screw stud it can screw right into this I hold the screw rule well you want toMoreThe male snaps on a screw stud it can screw right into this I hold the screw rule well you want to pull it taut and again you can paint this thing just about any color that you want.
How do you make curtains for dummies?
How to Make Curtains1.Measure. If you've ever done a DIY, you probably know at this point that the first step is to measure—and that you should really measure twice before making the first cut! ... Cut fabric. ... Pin and sew one side. ... Create lining hem. ... Sew second side. ... Flip curtain right-side out. ... Create rod pocket. ... Iron.More items...•
How do I design my own curtains?
1:4912:25How to MAKE CURTAINS at HOME that look INCREDIBLE ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou may have to sew two pieces of fabric together vertically to achieve the width that you need forMoreYou may have to sew two pieces of fabric together vertically to achieve the width that you need for my drapes i'm using the full width of fabric to make more narrow drapery panels for my breakfast.
How do you measure a door for a curtain?
For the width, take your steel tape measure and take the full length measurement of your pole or track. For pencil pleats on a track, measure the drop by starting from the top of the track, and for pencil pleats on a curtain pole, measure from the eye of the curtain rings (where you'll be hooking your curtains into).
How do you hang curtains on a doorway?
Mount a standard curtain rod over an entry door that opens outward and has a sidelight window on one or both sides. Extend the rod's hardware evenly about 1 foot past the entryway and windows. Hang two fabric panels on the rod. Push one curtain to each side when opening the door or to expose the doorway set.
How do you hang blinds on a French door?
0:188:25How To Install Blinds On A Door - YouTubeYouTubeStart of suggested clipEnd of suggested clipFrom the door and install the new brackets that come with the uh the new blinds. All right so justMoreFrom the door and install the new brackets that come with the uh the new blinds. All right so just twist on them and give a little pull hold on with one hand.
How do you hang curtains on a glass door?
Thread the curtains onto the rod if you are using curtains with a pocket top or closed loops or rings at the top. Set the curtain rod on all three brackets. Attach the finials, if any, to the ends of the rod. Hang hooked curtains onto the rod after you have attached the finials.
How do I open a French door curtain?
To open your new French Door Curtains just fold the hem over the rod then fold them over one more time. Sometimes if I want the curtains open even more I’ll fold them a third time.
How do French Door Curtains Operate?
I made my french door curtains double-sided so they would looked nice opened or closed. Look for details below on how I used to open and close them, and how I do it now.
How many sections can you cut from one curtain panel?
You should be able to cut these four sections from one curtain panel or one width of fabric, depending on the pattern.
How tall is a French door?
For my standard height French door each finished panel is approximately 67″ tall.
How much does drapery fabric cost?
Drapery fabric comes in 54″ widths so if you’re making them double-sided 10 yards of fabric can get pricey. I’m talking $15-$24 per yard. Even if you use a simple backing that cost adds up.
Can you make French door curtains with a straight line?
If you can sew a straight line , you can make these French Door Curtains.
Can I make curtains with the same fabric?
I actually made both sides of my curtains with the same fabric. It worked because the pattern is the same all over. I was careful to line them up as I was pinning to cut. The inspiration I saw in a magazine decades ago they used a contrasting fabric because they rolled theirs up and used ribbon to keep them open.
What are French doors?
French doors are a bit of a curtain conundrum – if you use hanging curtains on a rod above they’re always in the way when you want to go in and out, while off-the-rack French door panels are usually really plain and snooze-worthy. I had these John Robshaw designed panels from Anthropologie leftover from our old house, so I decided to chop them up for the doors leading from our master bedroom to the back patio and do a custom french door panel tutorial.
How to make a rod pocket?
2. Now to create your rod pockets: Fold the top of your curtain edge down 1/4 an inch and iron, then another half an inch and iron again. Pin in place and sew: You’ve created your rod pocket: 3.
What are French doors?
French doors are an elegant detail that can enhance the beauty of almost any space. They do, however, lack the privacy that standard doors offer. Sheer curtains are an ideal solution, providing privacy without hiding the windows or interfering with the function of the doors. French door curtains are typically hung from matching curtain rods mounted ...
How wide should a curtain panel be?
To achieve proper fullness, your curtain panel should be about twice the width of the space you intend to cover, so multiply your width measurement by 2 to determine how wide a panel you need for each door. Lay your panel flat and measure to the width you just determined. Cut off any excess material with fabric scissors.
How to make a bottom rod pocket?
Take the number you calculated in Step 3 and measure this distance from the bottom edge of the panel. Mark with tailor's chalk or a dressmaker pencil, continuing across until you've marked the entire width of the panel. Fold the bottom of the panel upward, matching the edge with the line you just drew. Pin in place and sew along the seam to secure.
How to hem a panel?
Hem the edge you just cut by making a 1/4-inch fold on the raw edge along the entire length of the panel; pin in place and iron flat. Remove the pins and fold the edge another 1/4 inch, again pinning in place as you go. Iron this second fold, and use a sewing machine to stitch along the fold to complete the hem. Skip this step if you didn't need to cut any excess fabric from the panel.
How do you hang curtains on French and patio doors?
You can hang curtains on French and patio doors the same way as you do with curtains hung at windows, outside of the frame, so that the curtains can be pulled right back from the frame to reveal the entire width of the doors.
Can French doors step out onto a balcony?
French doors that step out onto a balcony? Yes please! When you have a view like this, you want to enhance it, not detract from it.
Can you use drapes instead of curtains in a bedroom?
It has beautiful shutters that were restored so in this case a simple blind will suffice instead of curtains.
Can you use French door drapes in a dining room?
If you’re a fan of dark and dramatic, then you can use your French door drapes to soften the look and add pattern. It works really well in this dining room and you can of course match to your seat cushions, table runner and napkins.
Do chrome pendants match chrome curtain rails?
It’s all about balance and the finer details, note the chrome pendants match the chrome curtain rails, it’s these small elements that make a scheme work.
Can curtains cover patio doors?
Instead, the best option is a pair of fully lined curtains that completely cover the entire patio door frame so they capture all the pesky drafts, as Penny Morrison, interior designer at Penny Morrison Studio explains:
How to measure for curtains for French doors?
Use the measuring tape to take important measurements to determine the size of the curtains you need. If you are hanging the French door curtains above the doors, measure the width of the French doors plus 2 inches on both sides for a total of 4 inches. If hanging the curtains to cover the panes of the doors, measure the width of the pane of the glass and add 1 inch to each side for a total of 2 inches.
What is the first style of French doors?
The first style is fitted to the glass of the French doors. They are installed around the inner trim of the doors to just cover the glass. These are readily one sheet of fabric on a curtain rod and do not open.
Why do people use French doors?
French door s are a great look but offer little privacy, which is why people often decide to use French door curtains. The beauty of French doors is that they are large and allow a lot of light to enter the home. French door curtains allow the light to be filtered while providing privacy from neighbors. Nearly any fabric can be used ...
How to make French doors more private?
Curtains. Adding curtains to your French doors is the most common way to make them more private. Curtains and drapes come in a wide range of materials and colors, so it's easy to customize the door's look to match the rest of your decor. Sheers are an ideal option if you need privacy but still want some light to pass through the door's panes.
How to get privacy on French doors?
Painting your French door's glass panes is another easy way to get more privacy. Use enamel paint or acrylic paint mixed with glass and tile medium, so the paint adheres to the smooth surface of the glass. To keep the paint off the door frame, use painter's tape to cover the edges around the panes.
What is a French door?
By Jennifer Blair. Whether used in exterior or interior applications, French doors add a decorative look to your home that other door styles can't match. However, French doors aren't without their issues -- because they're made up almost entirely of glass panes, they offer a clear view into your home. If you want a little more privacy ...
What are window films made of?
If you don't want to add bulk to your French doors, window films are an ideal alternative to curtains and blinds. The films are usually made of vinyl and cling to glass panes without the use of adhesive, so it's easy to remove or change them. They also come in a variety of styles, ranging from simple frosted films to detailed patterns that resemble colorful stained glass. To fit your French door's panes, you'll need to trim the window films to size. Once the film is cut, though, installation is as simple as peeling it from its backing and applying it to the door's panes.
Can you mount curtains to a door?
You can mount the curtains to the door itself or to the wall above the door, depending on the look that you prefer. In either setup, you'll need to install brackets to hold the curtain rods in place.
Can blinds be installed on French doors?
Depending on the direction that it faces, you may need to adjust some of the blinds' slats to accommodate the handle. If your French door's panes are deep enough, you can install the blinds inside the window frame itself, which may make it easier to fit them around the handle.