- Base Coat. To get a crackle finish, you will need to think backwards. The color peeking through the cracks in the finish is the base coat.
- Pick Your Crackle Paint. Crackle paint or finish can be found in most paint or home improvement stores. ...
- Remove Hardware. Before applying any stain, paint or crackle finish, clean all surfaces of debris and dust. Remove hardware pieces such as knobs, handles or hinges.
- Get (Paint) Cracking. Spray or brush your crackle paint over the surface of your piece. Spray evenly across the surface, following safe distance instructions on the can.
- Clear Topcoat. Let the crackle dry for as long as recommended on your paint manufacturer's packaging. ...
- Extra Colorful Topcoat. To further the look and depth of the cracks, an acrylic topcoat in the same color or a contrasting or complementing color can be applied before or ...
- Lacquered Furniture. Furniture with a lacquered or clear topcoat can still take an application of crackle paint for an antique look with a bit of elbow grease.
How to give a crackle finish to a piece of furniture?
Okay, let’s say you want to give a crackle finish to a piece of furniture: First, clean the surface well and make sure it’s dry. Apply your first coat of paint. This is the color that will appear in the fractures. Allow this coat to dry thoroughly. Once the first coat of paint is dry, brush on the crackle medium.
How do you paint over crackle finish?
Just like with commercial crackle finish, your furniture needs to be painted with a base coat of paint first. When that coat is completely dry, brush on the glue. I usually thin my glue with just a few drops of water. When the glue is somewhat dry but still a little tacky, brush on the top coat of paint.
How can I make my house look old and distressed?
For a super distressed look, some people use a paint scraper to remove a good portion of the top coat of paint. Yet another way to achieve an old look is to create a crackle finish.
How do you paint furniture without damaging the finish?
Be sure to dab paint in the cracks and crevices of the furniture. Once you have an even coat, let it dry overnight. Using a clean, dry brush, apply the top-coat color in a flat finish over all the painted surfaces.
How do you get crackle on furniture?
1:474:18How to Create a Shabby Chic Crackle Effect on Furniture with Rust Oleum ...YouTubeStart of suggested clipEnd of suggested clipIt's very important that you use a water-based paint. Now you'll notice as I put this on that I'mMoreIt's very important that you use a water-based paint. Now you'll notice as I put this on that I'm beginning to paint. The color against the grain of the wood.
How do you make a crackle finish?
1:123:42How To Make your own Crackle Paint - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn on top of the wet glue. And you'll you will actually see it start to crackle in front of yourMoreOn on top of the wet glue. And you'll you will actually see it start to crackle in front of your eyes it's actually amazing I love it. Okay. So we'll just go ahead and just paint this on.
What kind of paint do you use for crackling?
Select a satin- or semigloss-sheen base-coat paint that will contrast with and show through the cracks in your top coat nicely. Apply the base coat to your project surface, allowing the paint to dry at least overnight. Use masking tape to mask off any part of your project that you don't want to crackle.
How do you crackle furniture with Elmer's glue?
0:473:25Crackle Paint, and Distress your furniture with Elmer's glue and ...YouTubeStart of suggested clipEnd of suggested clipApply a thin coat of glue for tiny cracks. And more glue for larger. Ones you want the glue to getMoreApply a thin coat of glue for tiny cracks. And more glue for larger. Ones you want the glue to get kind of tacky. But not totally dry we're going to work in small sections.
Does Lowes sell crackle paint?
Montana Cans CRACKLE EFFECT Matte Traffic Black Crackle Spray Paint (NET WT. 11.25-oz) in the Spray Paint department at Lowes.com.
Can you make your own crackle paint?
A homemade crackle medium is an incredibly simple recipe, requiring only a suitable glue. School glue and wood glue both work; school glue is generally less expensive and available at more stores. Even dollar-store school glue works as a crackle medium.
How do you paint a crackle finish on furniture?
2:204:23How To Create a Crackled Paint Finish on Furniture - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou apply the paint. And even strokes you'll get more linear cracking. As the paint is drying you'llMoreYou apply the paint. And even strokes you'll get more linear cracking. As the paint is drying you'll see the cracks forming.
How do you get crackle paint effects on wood?
Apply the Crackle Medium When the primed piece is dry, use a paintbrush to apply the color you want to show through in the crackle finish, brushing in the direction of the grain. Be sure to dab paint in the cracks and crevices of the furniture. Once you have an even coat, let it dry overnight.
Can you use Mod Podge to crackle paint?
1:564:29How to Make a Crackle Effect Using Mod Podge! - YouTubeYouTubeStart of suggested clipEnd of suggested clipFace brushes yeah favorite before the glue dries you're going gonna paint a layer over the glue.MoreFace brushes yeah favorite before the glue dries you're going gonna paint a layer over the glue. Directly over the glue.
How do you get the crackle effect with glue?
0:4010:25How to Crackle Paint with Elmers Glue - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the trick to this whole. Application is to distribute your glue. Throughout your surface withoutMoreSo the trick to this whole. Application is to distribute your glue. Throughout your surface without really going over the same area twice because that's what prevents.
Can you use wood glue to crackle paint?
Make your own crackle-paint finish without a special crackle medium by using one simple ingredient before you paint: glue. Wood glue or school glue, even a bargain brand, serves as the crackle medium. Painting it while it's tacky creates the cracks.
How do you crackle paint with Vaseline?
0:081:40How to Distress Paint with Vaseline - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you're just going to put some Vaseline on it and we want it pretty thick and just keep in mindMoreAnd you're just going to put some Vaseline on it and we want it pretty thick and just keep in mind that wherever you put the Vaseline. The paint is not going to adhere.
How do you make a crack effect in paint?
2:567:00Simple Cracked & Chipped Paint Effect using a Wood Block - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing the block helps to create the look of chipped paint. You can use any size woodblock you haveMoreUsing the block helps to create the look of chipped paint. You can use any size woodblock you have as long as it has one wide flat surface you can do this in multiple light passes.
Can you use spray paint for crackle finish?
1:1810:57Spray Paint & Chalk Paint Crackle Hack! NEW TECHNIQUE! 100 ...YouTubeStart of suggested clipEnd of suggested clipSo try to get enough paint on your first or second pass spray paint I'm just going to do a lightMoreSo try to get enough paint on your first or second pass spray paint I'm just going to do a light spray paint. Over this and this paint is water-based spray paint is oil-based oil.
Can you use Mod Podge to crackle paint?
1:564:29How to Make a Crackle Effect Using Mod Podge! - YouTubeYouTubeStart of suggested clipEnd of suggested clipFace brushes yeah favorite before the glue dries you're going gonna paint a layer over the glue.MoreFace brushes yeah favorite before the glue dries you're going gonna paint a layer over the glue. Directly over the glue.
How do you make a crackle effect with acrylic paint?
Make your own crackle-paint finish without a special crackle medium by using one simple ingredient before you paint: glue. Wood glue or school glue, even a bargain brand, serves as the crackle medium. Painting it while it's tacky creates the cracks.
CLEAN AND PREP PROCESS, AND PRODUCTS
Vacuumed base, sides, and inside drawers (my amazing mom gave me this piece and that means it came with a little husky love too!)
PRE-CRACKLE PAINT PROCESS
When it comes to crackle you have a few options depending on the colors you want your piece to be. You first need to determine what color (s) you want your base to be. This will be the color (s) that will show through your cracks.
CRACKLE ROUND 2
I decided to do a second layer of crackle but this time using ArtIsan Enhancements Easy Crackle – used for finer crackling. I followed my same process above; applying the crackle over my piece. Below is what the crackle medium looks like as it begins to dry.
THE REVEAL
Voila! I love the texture I was able to achieve with this crackle finish! It’s a fun shabby chic look with layers of love.
How to make crackle paint on wood?
a.) Elmer’s® school glue. When using Elmer’s® glue, simply apply a relatively thick layer and let dry until barely tacky. Mix colored paint with some glue with the ratio 2:1 and then paint over the nearly dried glue. When the glue dries, it will constrict and give the crackle paint effect on your furniture. Make sure that you don’t use latex paint for this because latex paint doesn’t crack. The amount of paint and glue used will determine the amount of crackling. To know how your finished product will look like, experiment on other pieces of wood first.
What is crackle paint?
Dave. Crackle painting is one way to antique furniture and give it an old worn look. It can be done from the comfort of your home with only a few tools and paint supplies. Please follow the steps below to learn how to crackle paint furniture. 1.)
How long does it take for crackle paint to dry?
Wait for it to dry before putting on the final coat. This will generally take up to four hours but anything after that may affect the effectiveness of the medium.
Can you paint cracks over a piece of furniture?
Applying thick paint will make the cracks bigger while thin paint will make them smaller. For small pieces of furniture, you can apply the crackle medium all at once. One important thing to note when applying the final coat is not to paint over an area that has already been painted.
Can you crackle paint furniture?
Crackle painting can give your home a new look and feel. It may be quite expensive to crackle paint furniture with a professional, so why not try it yourself first? This would be a great project for those who love do-it-yourself projects!
How to Crackle Paint Furniture for a Vintage Look
Do you want to give your furniture a vintage look? Crackle paint is the perfect way to do it! This blog post will show you how to crackle paint furniture in just four easy steps. Crackle paint can be used on wood, metal, or plastic furniture. It gives a beautiful, aged appearance that will make your furniture look like it’s been around for years.
What are the benefits of Crackle Paint Furniture?
One of the benefits of crackle paint furniture is that it can add texture and interest to a room. Crackle paint furniture can also be a great way to add a pop of color to a room without committing to a large piece of colorful furniture. Additionally, crackle paint furniture can be a great way to distress furniture.
FAQs How to Crackle Paint Furniture
There are a few different places you can buy crackle paint. You can find it at most hardware stores and home improvement stores. You can also find it online through websites like Amazon or Home Depot. Crackle paint is generally pretty easy to find and relatively inexpensive.
Conclusion
If you’re looking for a quick and easy way to give your furniture a vintage look, crackle paint is the solution. With just a few simple steps, you can create an aged appearance that will make your table stand out from the rest. So what are you waiting for? Get started on your next DIY project today!
How long does it take for crackle medium to dry?
Using a synthetic-bristle brush, apply an even coat of Crackle Medium making sure that you do not over-brush. Allow this coat to fully dry (~12 hours). Letting the Crackle Medium dry completely is critical as without sufficient dry times no cracking will occur.
Can you skip the base coat on wood?
If you would prefer the cracks in your finish to reveal the natural wood color underneath, you can skip the base coat and move straight on to step 2!
Can you use a blow dryer to remove cracks?
If you over-brush your crackle or top coat, it can create either very fine cracks or no cracks at all, so just apply and then leave it alone.
Step 1: Pre-paint Your Piece
Simply start by applying a base coat of Country Chic Paint to your project. If you're unsure of how to prepare your surface before painting, click here to see our surface preparation tutorial. It's best to wait at least 12 hours before you move on to the next step.
Step 2: Apply the Crackle Medium
Using a synthetic-bristle brush, apply an even coat of Crackle Medium making sure that you do not over-brush. Allow this coat to fully dry (~12 hours). Letting the Crackle Medium dry completely is critical as without sufficient dry times no cracking will occur.
Step 3: Apply Your Top Coat
Apply your top coat of Country Chic Paint. If you chose to use a base coat of paint, make sure this coat is in a contrasting color. Do not over-brush. As the paint begins to dry, you'll see cracks start to appear in the finish.
Step 4: Cleanup
Here's how the finished product turned out. Isn't it fantastic? The possibilities are endless, so go get creative!
Step 5: Watch This Tutorial Video!
Watch this video to see our company co-founder, Rosanne using Crackle Medium first hand! Make sure to subscribe to our channel to get access to all our videos!
What to do if your chair is crackling?
Finally, if you're crackling a surface that will get a lot of wear and tear—such as a tabletop, a chair seat, or a step stool—finish it with a satin clear coat to keep it from chipping. Otherwise, leave it as is for the most realistic aged finish.
How to paint crackle finish?
Just wipe it down with a wet sponge to remove surface dirt, and once it's dry, brush on a coat of primer. When the primed piece is dry, use a paintbrush to apply the color you want to show through in the crackle finish, brushing in the direction of the grain. Be sure to dab paint in the cracks and crevices of the furniture.
What is crackle medium?
Vintage-furniture hounds spend years tracking down painted pieces that have just the right patina, its cracked layers of color just oozing with charm. You can shortcut that journey with contrasting shades of flat latex paint and a special medium that comes out of the can as a milky liquid, goes on clear, and shrinks and cracks the paint color layered on top of it, revealing glimpses of the base shade. Crackle medium ages furniture right before your eyes. Which means you can create your own version of a piece's history, with colors of your choosing, whether you're aging one that's actually old or not.
How to paint a top coat?
Paint the Top Coat. Using a clean, dry brush, apply the top-coat color in a flat finish over all the painted surfaces. Even before you're finished with the entire piece, you'll see the top coat start to shrink up and reveal the color—and history—beneath. Let the piece cure overnight before using it.
How to crackle paint?
Okay, let’s say you want to give a crackle finish to a piece of furniture: 1 First, clean the surface well and make sure it’s dry. Apply your first coat of paint. This is the color that will appear in the fractures. Allow this coat to dry thoroughly. 2 Once the first coat of paint is dry, brush on the crackle medium. Be sure to apply it as evenly as possible, and make sure you don’t miss any surface areas. 3 The crackle medium needs to dry for about an hour until it feels dry to the touch. Don’t wait too long, or the medium won’t work. 4 When the crackle medium feels dry to the touch, apply your top coat of paint. As the paint dries, the fractures will appear.
What is crackle finish?
What’s a crackle finish? Furniture with a crackle finish has lots of lines that show the paint color under the top coat. The surface of the paint is broken or fractured. The lines or cracks might be long, minuscule, or somewhere in between. The process gives the furniture a beautiful vintage appearance, making it look as if it’s been handed down for generations. Crackle paint adds lots of character and interest to pieces that are otherwise boring and mundane. Best of all, you can do it yourself!
How to distress painted furniture?
Furniture makers, artists, and craftsmen are turning out lots of pieces that have been purposely manipulated in order to make them look old and worn. This technique is called “distressing.” There are lots of different ways to distress painted furniture. You can use sandpaper to create wear, you can use paint or stain to create a patina, and you can add several layers of paint in different colors and chip some of it away.
What type of paint should I use for an old look?
These include paints with a semi-gloss finish, paints with a gloss finish, and paints with a metallic finish. Since you’re going for an old look, anyway, it’s best to use a latex paint with a flat finish.
How long does crackle paint dry?
Be sure to apply it as evenly as possible, and make sure you don’t miss any surface areas. The crackle medium needs to dry for about an hour until it feels dry to the touch. Don’t wait too long, or the medium won’t work. When the crackle medium feels dry to the touch, apply your top coat of paint.
Can you stencil on painted furniture?
Can you do this with a crackle finish? Yes, you can! You do it a little differently than you would over a smooth painted surface, however. In that case, you probably want your stenciled image or letters to be sharp and clear, but with a crackled surface, super sharp stenciling would look sort of out of place.
Do you need to paint crackle furniture?
Just like with commercial crackle finish, your furniture needs to be painted with a base coat of paint first.
