How do you manually run a hunter sprinkler?
Manual Run – All StationsPress and hold the button for three seconds. ... Select program by pressing the button.Use the or buttons to select the amount of time for the station to water if different from the run time displayed.Use the button to move to the next station.
How do you override a hunter sprinkler system?
To program sensor override:Turn the dial to the RUN position.Press and hold the button while turning the dial to the START TIMES position.Release the button. ... Press the or button to enable or disable the sensor for the station shown.More items...•
How do you turn water on in a Hunter Pro C?
0:181:46Pro-C® No Zones Running - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou may use the plus or minus button to select the amount of time for the station of water. Turn theMoreYou may use the plus or minus button to select the amount of time for the station of water. Turn the dial clockwise to the run position to begin the manual. Watering.
How do I run a Hunter Pro C test?
To initiate the test program:Press and hold the PRG button. The station number will be flashing.Press the or button to scroll to the station you would like the test program to start with. Use the and buttons to set a run time of up to 15 minutes. ... After a 2 second pause, the test program will begin.
How do you manually turn on a sprinkler solenoid?
0:171:00Manual operation of Rain Bird valves - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn the solenoid in the on or counterclockwise. Direction about a quarter turn then wait a fewMoreTurn the solenoid in the on or counterclockwise. Direction about a quarter turn then wait a few seconds until you hear water rushing through the valve.
How do I reset my Hunter Pro C?
0:040:36Pro-C Irrigation Controller Advanced: 08, Resetting Memory - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe back of the face pack you will find the reset. Button press and hold the program. And while youMoreThe back of the face pack you will find the reset. Button press and hold the program. And while you are still holding it press the reset button for a couple of seconds.
Why is my Hunter Pro C not working?
Check the wiring connections at the master valves for loose or corroded connections, or a bad solenoid. If you do not have a master valve, verify that your valves have a water supply, you will need to locate your irrigation valves and turn the solenoids on the valves ¼ counterclockwise at manually activate the valves.
Why is my Hunter sprinkler not running?
If the sprinklers do not turn on you may have a valve shut down that supplies the irrigation system. If the sprinklers come on, you may have a wiring problem at the valves. Check the wiring connections at the valves for loose or corroded connections.
How do you troubleshoot Hunter Pro C sprinkler system?
SolutionMake sure sensor is micro-switch type such as Mini-Clik®. Check that the jumper has been removed from the SEN terminals. Confirm proper operation (see “Testing the Weather Sensor”).Manual Single Station Mode will override the sensor. Use Manual All Station Mode to test sensor.
How do I turn on Hunter node manually?
0:061:13Manually run a Hunter NODE irrigation controller - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust hold down this play button until that hand appears. And that runtime appears and the system'sMoreJust hold down this play button until that hand appears. And that runtime appears and the system's going to count down.
What does sensor off mean on Hunter Pro C?
0:095:39Rain Sensors - FAQs - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt will ignore any input from the rain sensor.MoreIt will ignore any input from the rain sensor.
How do I turn on my Hunter sprinkler system after winter?
Steps to turn on sprinkler system after winteringFind system's main shut-off valve. ... Find the vacuum breaker. ... Close the vacuum breaker test valves. ... Open the vacuum breaker's shut-off valves. ... Reinstall main valve bleeder cap (as needed). ... Slowly open the main valve. ... Test the system. ... Recheck the vacuum breaker and valves.More items...•
How do you turn off a hunter sprinkler head?
0:100:39How To Turn Off A Sprinkler Head (Hunter I-20) - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll kind of feel it lock in the police. You can turn it clockwise. That actually turns the headMoreYou'll kind of feel it lock in the police. You can turn it clockwise. That actually turns the head right off for you you also have the pressure.
How do you turn off a Hunter Pro spray sprinkler head?
To shut off spray to one head within a zone, you would need to cap off the head at a PVC level or install a Pro Spray Shutoff Cap PN 213600SP (if a Pro Spray head is installed). The Pro Spray shutoff cap can be purchased through your local Hunter distributor.
How do you fix a hunter sprinkler head that won't rotate?
0:262:36[Solved] Hunter Sprinkler Head Not Rotating? Well, Try ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipBody then take out the filter. And clean it properly. Then clean the filter at the bottom of theMoreBody then take out the filter. And clean it properly. Then clean the filter at the bottom of the internal assembly by removing the cap can needle pliers can easily thread off the cap.
How do I turn on my hunter sprinkler system after winter?
Steps to turn on sprinkler system after winteringFind system's main shut-off valve. ... Find the vacuum breaker. ... Close the vacuum breaker test valves. ... Open the vacuum breaker's shut-off valves. ... Reinstall main valve bleeder cap (as needed). ... Slowly open the main valve. ... Test the system. ... Recheck the vacuum breaker and valves.More items...•