How do I manually start Hunter Pro C?
- With the dial in the RUN position, hold down the button for 2 seconds.
- This feature automatically defaults to program A. You can select program B, or C by pressing the PRG program.
- The station number will be flashing.
- Press the button to scroll to the station you wish to begin with.
How do I start a hunterhunter program manually?
Hunter controllers allow you to start a station or an entire program manually. To do so, turn the dial to Manual Single Station or Manual All Stations, verify that the stations that you want to activate have run time, and turn the dial back to the Run position.
How do I program my Pro-C to start and advance?
Pro-C - One Touch Manual Start and Advance 1 With the dial in the RUN position, hold down the button for 2 seconds. 2 This feature automatically defaults to program A. You can select program B, or C by pressing the PRG program. 3 The station number will be flashing. ... 4 Press the button to scroll to the station you wish to begin with. ...
How do I program stations on the controller?
Quickly press the and button to scroll through the stations and use the and buttons to adjust the station run times. (If no buttons are pressed during step 2 or 3, the controller will automatically begin program A .) Press the button to scroll to the station you wish to begin with. After a 2 second pause, the program will begin.
How do I add a start time to a program?
This eliminates the need to enter a start time for each station. Press the button to add an additional start time, or PRG button for the next program. With the dial set to the START TIMES position, push the and buttons until you reach 12:00 AM (Midnight).
How do you run a sprinkler system manually?
0:000:55Manually starting sprinkler system to run - YouTubeYouTubeStart of suggested clipEnd of suggested clipDon't have time set or anything you can run through each zone. By pushing the right arrow buttonMoreDon't have time set or anything you can run through each zone. By pushing the right arrow button which it says right here is the manual start. And you just hold that down for a few seconds.
How do you manual start a hunter?
Hunter controllers allow you to start a station or an entire program manually. To do so, turn the dial to Manual Single Station or Manual All Stations, verify that the stations that you want to activate have run time, and turn the dial back to the Run position.
How do you turn a hunter node on manually?
0:061:13Manually run a Hunter NODE irrigation controller - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust hold down this play button until that hand appears. And that runtime appears and the system'sMoreJust hold down this play button until that hand appears. And that runtime appears and the system's going to count down.
How do you manually turn on a Hunter sprinkler valve?
0:374:32Basic Hunter Valve Operation - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply turn the solenoid the quarter turn clockwise hand tight don't overdo it you'll feel it stopMoreSimply turn the solenoid the quarter turn clockwise hand tight don't overdo it you'll feel it stop and then you'll hear the water.
How do I start Hunter Pro C in Spring?
0:045:37Spring Sprinkler Activation + Start Up - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo a first step that we'll want to do is we want to shut that drain off and then we'll want toMoreSo a first step that we'll want to do is we want to shut that drain off and then we'll want to slowly. Press your eyes the balls out here and you'll hear it start to kick on.
How do I use Hunter Pro C?
0:5915:07Pro-C Basic Programming - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe round PRG button will be used to change between programs a B or C. The first step in program inMoreThe round PRG button will be used to change between programs a B or C. The first step in program in any controller is to set the current date and time to do this turn the dial to the date. And time.
How do I turn my hunter node back on?
To put the Node battery powered sprinkler timer in the off mode, use the center button to advance to the off screen and allow the controller to go to sleep in that position. To turn the controller back on, use the center button to return to the home screen and allow the controller to go to sleep in that position.
How do I turn on my hunter sprinkler system after winter?
Spring Start-Up ChecklistOpen the system main water valve slowly to allow pipes to fill with water gradually. ... Verify the proper operation of each station valve by manually activating all zones from the controller.Walk through each station on the controller, checking for proper operation of the zone.More items...
How do you test a hunter node?
Make sure the controller is in Idle Mode. Press and hold the PRG button until the icon is displayed. The station number will be displayed in the lower left side of the display along with the run time. Quickly press the plus or minus buttons to set the duration of watering time for the test program.
How do I turn on my sprinkler system without a controller?
0:165:19How to Turn on Sprinklers Manually + Business Talk - YouTubeYouTubeStart of suggested clipEnd of suggested clipSpicket if you turn that counter clockwise a quarter of a turn.MoreSpicket if you turn that counter clockwise a quarter of a turn.
Why won't my sprinklers turn on manually?
Here are some common reasons why your sprinkler system won't turn on: Lawn sprinkler control timer isn't working correctly. Clogged or dirty sprinkler heads. Broken sprinkler heads.
Can you manually open a solenoid valve?
One way is to simply turn the solenoid (the black cylinder with 2 wires) counter-clockwise a 1/4 to 1/2 turn. To shut off the valve, twist the solenoid clockwise until it is snug on the valve. The other way is to use the bleed screw the same way, loosen the screw enough to release air (1/4 to 1/2 turn).