How do I manually run Hunter XC sprinklers?
- Hold down the arrow (>) button for 2 seconds. When you will see station 1 appear on screen, release the arrow (>) button.
- This feature automatically defaults to program A.
- The station number will be flashing.
- Press the arrow (>) button scroll to the station you wish to begin with.
How do you manually activate a hunter sprinkler system?
To do so, turn the dial to Manual Single Station or Manual All Stations, verify that the stations that you want to activate have run time, and turn the dial back to the Run position. How do you test a hunter sprinkler system?
How do you test a hunter sprinkler system?
How do you test a hunter sprinkler system? Press and hold the PRG button. The station number will be flashing. Press the or button to scroll to the station you would like the test program to start with. Use the and buttons to set a run time of up to 15 minutes. After a 2 second pause, the test program will begin.
How do I program the water days on my sprinkler system?
Twist the dial so that it is in the “Water Days” position. This will switch the display on the controller to days of the week. Use the left and right arrows to cycle through the days. To program properly, the days should be shown as follows: A water droplet icon indicates a day that you want your sprinklers to run.
Why choose a hunter sprinkler system?
Going with a Hunter Sprinkler system is a great choice for efficient water irrigation for your lawn or garden. The best way to keep your sprinklers running in tip-top shape is to hire an irrigation service for installation, routine maintenance, and any repairs.
How do I manually turn on a Hunter node?
0:061:13Manually run a Hunter NODE irrigation controller - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust hold down this play button until that hand appears. And that runtime appears and the system'sMoreJust hold down this play button until that hand appears. And that runtime appears and the system's going to count down. And straightaway run as long as I've programmed.
Why is my hunter sprinkler system not turning on?
If the sprinklers do not turn on you may have a valve shut down that supplies the irrigation system. If the sprinklers come on, you may have a wiring problem at the valves. Check the wiring connections at the valves for loose or corroded connections.
Why won't my sprinklers turn on manually?
Here are some common reasons why your sprinkler system won't turn on: Lawn sprinkler control timer isn't working correctly. Clogged or dirty sprinkler heads. Broken sprinkler heads.
How do I turn on my hunter node sprinkler?
0:061:14NODE: Turn on stations manually - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply hold down the right arrow to enter the manual mode. Once there you can use the right arrow toMoreSimply hold down the right arrow to enter the manual mode. Once there you can use the right arrow to advance through the various stations that you want to turn on when landing on the desired station.
How do I reset my hunter water system?
To reset the irrigation controller, all you need to do is press the negative, the hand and the program keys at the same time, then use a small tool to press in the small reset button on the side of your controller.
How do I test my Hunter controller?
0:261:00Hunter sprinkler controller testing trick - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you'll push the program push and hold the program button it'll bring up a screen to run all theMoreIf you'll push the program push and hold the program button it'll bring up a screen to run all the stations. To whatever time you set one or two minutes is sufficient.
How do I turn on my hunter sprinkler system after winter?
Spring Start-Up ChecklistOpen the system main water valve slowly to allow pipes to fill with water gradually. ... Verify the proper operation of each station valve by manually activating all zones from the controller.Walk through each station on the controller, checking for proper operation of the zone.More items...
How do I turn on my outdoor sprinkler system?
0:023:00How To Turn On An Irrigation System - YouTubeYouTubeStart of suggested clipEnd of suggested clipDevice you'll see two items or in most cases two items that cocks sticking out of the side grab aMoreDevice you'll see two items or in most cases two items that cocks sticking out of the side grab a regular screwdriver. And turn them. So it would be perpendicular to which the water would flow.
How do I manually disable Hunter node?
Select the station you wish to run by using the right arrow. To turn the station off, use the center button to scroll to the off screen and it will turn off that zone, then use the center button to return to the home screen.
How do I reset my hunter node?
0:050:40How To Reset A Hunter Node - YouTubeYouTubeStart of suggested clipEnd of suggested clipUp press a key press any key a quick way to hard reset the controller is to hold down the negative.MoreUp press a key press any key a quick way to hard reset the controller is to hold down the negative. The right arrow and the program keys at the same.
How do you test a hunter node?
Make sure the controller is in Idle Mode. Press and hold the PRG button until the icon is displayed. The station number will be displayed in the lower left side of the display along with the run time. Quickly press the plus or minus buttons to set the duration of watering time for the test program.
Why do you need to spring clean your irrigation system?
Spring cleaning your irrigation system prolongs life and improves watering efficiency, saving time, water and money. When spring arrives and freezing temperatures cease, it's time to turn on irrigation systems and start watering again.
Why do sprinkler lines crack?
Open the system main water valve slowly to allow pipes to fill with water gradually. If these valves are opened too quickly, sprinkler main lines are subjected to high surge pressures, uncontrolled flow and water hammer , which may cause them to crack or burst.
Step 1
Hold down the arrow (>) button for 2 seconds. When you will see station 1 appear on screen, release the arrow (>) button.
Step 2
This feature automatically defaults to program A. You can select program b or C by quickly pressing the PRG button.
Step 3
The station number will be flashing. Press the arrow (>) button to scroll through the stations and use the plus (+) or minus (-) button to adjust station run times. (If no buttons are pressed for a few seconds during step 2 or 3, the controller will automatically begin watering).
Step 4
Press the arrow (>) button scroll to the station you wish to begin with. After a 2 second pause, the program will begin. At any time during the manual cycle, you can use the plus (+) or minor (-) buttons to navigate from station to station manually.
How to program Hunter sprinklers?
How to Set Up Programming Times. Once your Hunter Sprinkler system is installed, you can easily program all of your timer settings in a few quick steps. 1. Set Up the Correct Date and Time . Your first step will be to set up the correct time and date on your sprinkler controller. Simply turn the dial to “Current Time/Day” and use ...
What is a Hunter sprinkler system?
Going with a Hunter Sprinkler system is a great choice for efficient water irrigation for your lawn or garden. The best way to keep your sprinklers running in tip-top shape is to hire an irrigation service for installation, routine maintenance, and any repairs.
How many times can you reprogram Hunter sprinklers?
Hunter Sprinklers are different because you can set up four different programmed times to alternate between to solve this issue.
Why do sprinklers have timers?
Timer programming for sprinkler systems is great for both residential and commercial lawn care because you can just set it and forget it. This means that your lawn will be well cared for, even when you are on vacation or no one is around to manually operate the system.
How to control how long your sprinklers run?
Set the Run Times. You can control how long your sprinklers run on each station. Turn the dial to “Run Times” and highlight each start time that you want to adjust. It is recommended that you water for shorter periods in spring and fall – and longer times in the summer.
How much water does a sprinkler pipe waste?
A single crack in a sprinkler pipe can waste over 200 gallons of water a day. With a Smart Hunter system, you will know if there are any signs of issues with your system – and it can be shut off until it is repaired.
Can you use Hunter sprinklers all year round?
And of course, not using enough water or spraying infrequently will dry out your yard – especially during long, hot summers. This is why programming your sprinkler system is the best choice for both residential and commercial irrigation. The Hunter Sprinkler System is a great option that is easy to program for a healthy, green lawn all year round.
How to determine the time to run sprinklers?
Make sure to factor in your local watering schedule to determine the appropriate time and day to run your sprinklers. With the dial turned to “Start Times,” use the left and right arrow buttons to switch between the first (morning) and second (evening) start times for the sprinkler.
Why won't my sprinkler system turn on?
The first thing you should check is the sprinkler heads to make sure that they aren’t clogged with dirt or debris, or simply broken. Either situation can prevent your system from functioning properly.
Why is my sprinkler system not running?
If your sprinkler system’s controller displays the flashing sprinkler icon but your sprinklers are not running, you either have a wiring problem at the valves or your water supply has been shut off. If you have a master valve on your system, then the problem may be due to a master valve that won’t open.
Why won't my master valve open?
If you have a master valve on your system, then the problem may be due to a master valve that won’t open. Inspect the wire connections at the master valves for any corroded or loose wires, or a faulty solenoid. If your system does not have a master valve, check that your valves have a water supply.
Is Hunter sprinkler system easy to operate?
While the controller on your Hunter sprinkler system may look intimidating, it is rather easy to operate. With a greater understanding of all of the different settings and how to establish them, you can keep your landscaping healthy and maybe even save some money on your water bill!