- Open Tray 5, then pull out the extension tray for larger sizes. ...
- Move the width guides to the edges of the tray.
- Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface. ...
- Load the paper in the tray. ...
- Adjust the width guides until they touch the edges of the paper.
Where is the bypass tray?
The Bypass Tray is a paper tray on the left hand side of your device and can be folded away when not in use. It is primarily intended for use as a small quantity, special materials feeder and accommodates media of all types including transparencies (non-paper backed), envelopes and tabs.When media is detected in the Bypass Tray a paper settings ...
Why is it important to select the correct type for the media loaded in the tray?
It is important to select the correct Type for the media loaded in the tray. The device can detect different types of media as each page travels through the paper path and will halt a job if a mismatch occurs.Only use the types of media specified for use in the tray.
What can a tray feed?
The tray can feed a range of media weights and types.
Can labels be printed on one side?
Labels can only be printed 1-sided. Make sure the tray is in the down position. For larger media, use the tray extension. Place the media in the tray. Media must be positioned against the left side of the tray. Paper must not be loaded above the maximum fill line.
Can you load paper above the maximum fill line?
Paper must not be loaded above the maximum fill line. Load pre-printed paper and labels face-up and with the top towards the front of the device. Load hole punched paper with the holes on the right. Load transparencies face-up. If the transparencies have a white strip load them with the white strip on the right.
What is tray 3 in printer?
This matches what I would expect of your printer since tray 3 is typically the first of the higher capacity trays, and would be default be the printers default tray.
Is printer the issue?
Printer is not the issue, Word is.
How to set up Xerox accounting?
Click the Accounting... button. In the new windows, set Accounting System to Xerox Standard Accounting. Set Default User ID to your copier user ID. Leave Default Account Type as "Default Group Account". If you have multiple codes, you can choose to have it prompt you for each print job. Here are the accounting settings:
How to change printer properties?
Right-click on the printer, and then select [Properties] or [Printer Properties].
How to add printer to queue on Mac?
If the driver installer did not create the queue, you will need to do this manually. On a Mac visit System Preferences > Print & Fax to add a printer. Choose one of the printer addresses, and set the Protocol to "HP Jetdirect - Socket" and leave the Queue field blank. Specify the B8090 driver you just installed.
Do you need a copier ID to use a copier?
You will need to have a copier User ID created for you before you can use the copiers. If you already have a code for making copies and scanning to email, you can reuse this for printing. Please see the the front office manager in 367 for this.
Can Xerox print 8.5x11?
If the Xeroxes accept your job but do not want to print it, and cite resource constraints with any or all of the paper trays, your document might not be formatted for 8.5"x11" paper. On macOS in Preview, you can see the size of the document under Tools > Show Inspector. You can often reformat your document to an acceptable print size by printing it to PDF. You can then upload that PDF to the copiers.
