How to Program a DirecTV Genie Remote
- Point the Genie remote at your Genie HD DVR, Genie Mini, or Wireless Genie Mini.
- While you continue to aim the remote at your device, hold down the Mute and Enter buttons. Let go with the remote’s...
- The TV should display "Applying IR/RF Setup." That means you’re in RF mode—it’s time to program the remote.
Full Answer
How do you program a DirecTV remote to a Genie?
Setting Up a DIRECTV Genie Remote
- Setting Up a DIRECTV Genie Remote with Automatic Pairing. Direct your remote control at your Genie cable box (Genie Mini, Wireless Genie Mini or Genie HD DVR).
- Setting up a DIRECTV Genie Remote with Manual Pairing. Direct your remote at the cable box. ...
- Program a DIRECTV Genie Remote with a DIRECTV Ready TV. ...
- Program. ...
How do I connect my Genie Mini?
Power on the TV and the Wireless Genie Mini.
- Connect the Wireless Genie Mini client to your TV using an HDMI cable. ...
- Set the TV to the input being used. ...
- Plug the power cord of the Wireless Genie Mini and the TV to a working outlet or a power surge protector.
- Power on the TV and the Wireless Genie Mini.
How to set up DirecTV remote control?
Get connected
- Plug one end of the HDMI cable into your device and the other end into your TV. ...
- Want a wired internet connection? ...
- Insert the power cord into the back of the device and then plug it into a wall outlet. ...
- Turn on your TV and change the input to the correct one using the Input or Source buttons on your TV remote.
How do you program a Genie remote control?
Program the Remote Control
- Press and release LEARN CODE button on the motor housing; the LED indicator will blink twice per second. ...
- Press and release the button on the remote you want to program. ...
- Press the same remote control button again—the LED indicator will go out.
See more
Program remote for your HDTV or audio device
Below is the most common way to program a Genie remote. If these steps don’t work for you, follow the next set of steps to program a remote manually.
Program remote manually for your HDTV or audio device
Point the remote at your Genie HD DVR, Genie Mini, or Wireless Genie Mini.
Program remote for a DIRECTV Ready TV
Point the remote at your Genie HD DVR, Genie Mini, or Wireless Genie Mini.
How to connect a Genie remote to a receiver?
Press and hold the MUTE and ENTER buttons. Doing so will prompt your Genie remote to begin connecting to the receiver.
How to reset a Genie remote?
If your Genie remote won't pair with your Genie receiver, you can hard-reset the receiver by holding down the red "reset" button on the back of the receiver.
What is RC73 remote?
The RC73 is an RF remote for the DirecTV Genie receiver. The TV and other devices are controlled by it with IR. IR does both, but for different devices.
What happens if you reset a DirectV receiver?
Resetting your DIRECTV receiver will return it to factory settings, meaning that you'll have to go back and restore any settings or preferences which you had previously changed.
What is the model number of a genie remote?
Ensure that you're using your Genie remote. Genie remotes can have any one of the following model numbers: RC-73, RC-72, RC-71B, or RC-71. You should see the appropriate model number in the upper-left side of your remote. If you're using a non-Genie remote, you can't program it for use with your Genie receiver.
Why is my Genie remote not working?
Common Genie remote problems stem from low (or non-existent) battery life. Try replacing the batteries in your remote if you're having difficulties programming or using the remote.
How to get to menu on remote?
Press the MENU button. It's on your remote. Doing so opens the on-screen menu.
How to connect a Genie Mini to a TV?
Choose how you want to connect: Use an HDMI cable (recommended option) for high-definition (HD) video and Dolby® Digital audio - Plug one end of the cable into the HDMI port on the back of your Genie Mini. Then, plug the other end into the HDMI port on the back of your TV.
How long does it take to return a Genie Mini to DirectV?
Did you receive a return shipping label with the replacement Genie Mini? To avoid a non-return fee, send the old Genie Mini back to DIRECTV within 30 days.
How to use a 10 pin mini DIN cable?
Use a 10-pin Mini-DIN cable for standard-definition (SD) and HD (1080i or 720p) video and audio - Plug the black 10-pin connector into the A/V Out port on the back of your Genie Mini. Then, plug the other ends of the cable (s) into the corresponding colored input ports on the back of your TV.
How to program a DirectV remote?
Program a DIRECTV universal remote for an HD DVR or HD receiver. Press Menu on your DIRECTV remote. On the on-screen menu, select Parental Favs & Setup > System Setup > Remote or Remote Control > Program Remote. Select the device (DVD/Blu-ray player, DVR, gaming console, soundbar, TV, etc.) that you want the remote to control.
What remotes does DirectV use?
Depending on how long you’ve been a customer and what equipment you have, you probably have one of two DIRECTV remotes: a standard universal remote control or the DIRECTV Genie remote.
How much does a DirectV remote cost?
DIRECTV charges $15–$25 for a new remote, depending on whether you have the universal remote (the white one) or the Genie remote. If you have DIRECTV’s protection plan, the company will replace your remote free. You can, however, find DIRECTV’s remotes on Amazon.com for far less than $15–$25.
Why is my DirectV remote not working?
Reasons that your DIRECTV remote might not work include dead batteries, stuck buttons, faulty parts, incorrect mode settings, receiver location, blocked sensors, and other problems. We suggest visiting DIRECTV’s remote troubleshooting page for solutions.
How to get rid of nacho cheese on remote?
Using a microfiber or other lint-free cloth, wipe away any greasy fingerprints or nacho cheese streaks from your remote’s emitter and the receiver’s sensor. Keep your receiver and remote out of direct sunlight. Also, try turning down the brightness on your TV. Bright light can interfere with your remote’s signal.
How to fix a remote that won't work?
Unplug your receiver from the wall outlet. Wait 15 seconds, then plug it back in. Try your remote. If that doesn’t work, try the following: Move anything that could be blocking your remote’s infrared light from reaching the receiver’s sensor. Even the glass door on your entertainment center can cause interference.
Does DirectV have a remote?
DIRECTV does not have voice remotes, but there is limited voice functionality in the DIRECTV app. You can also control DIRECTV through your Alexa device (Echo, Dot, or Tap).
How to program a DirectV remote?
From the on-screen instructions, select Settings & Help > Settings > Remote Control > Program Remote. Choose the device (TV, audio, DVD, etc.) you want to program. If you don’t see your TV or device listed, use the DIRECTV code lookup tool to find the device’s five-digit code. Follow the on-screen instructions to finish programming your remote.
What is the code for a Genie remote?
Use the buttons on your Genie remote to enter the code 961.
How to get the green light on a remote?
Press and hold the MUTE and SELECT buttons at the same time until the green light at the top of your remote flashes twice.
What kind of remote is used for DirectV?
Before you keep reading, you’ll need to determine which remote model you own. There are two kinds of DIRECTV remotes ― the Universal Remote and the Genie® Remote. If you’re not sure what you have, you can compare your remote to the images below.
How to change the device on a DirectV remote?
The mode switch at the top of the remote determines which device it’s controlling. You can change the remote’s designated device by sliding the switch to your desired device setting (DIRECTV, AV1, AV2 and TV) to control the corresponding device.
How to turn on closed captioning on DirectV?
To turn on closed captioning, press INFO on your DIRECTV remote. Scroll right and select cc, then select Closed Captioning .
How many devices can you control with a universal remote?
Universal Remote. Your Universal Remote can control up to four devices, including TVs, game consoles, DVD players and more. This way, instead of keeping up with multiple remotes for multiple devices, you can easily control all of your devices with one remote. The mode switch at the top of the remote determines which device it’s controlling.