how do i program my hunter xcore sprinkler system

PROGRAM A:

• 1. Turn the dial to the START TIMES position. Look for the capital “A” near the start time number. ...
• 2. Turn the dial to RUN TIMES. Press the “+” or “-“ button to change station 1 to 6-minute run time (0:06). ...
• 3. Turn the dial to the WATER DAYS position. The symbol above “MO” should be flashing. ...

Full Answer

How do I program my hunter XCore irrigation system?

3:157:23Hunter X-Core Programming Multiple Programs and Additional FeaturesYouTubeStart of suggested clipEnd of suggested clipYou'll use the right arrow with the hand here above on the top right you'll hold that button downMoreYou'll use the right arrow with the hand here above on the top right you'll hold that button down and you'll see a program appear. You can change the program to programs B or C.

How do I reset my hunter XCore sprinkler box?

Resetting a Hunter X-Core is easy. To reset the irrigation controller, all you need to do is press the negative, the hand and the program keys at the same time, then use a small tool to press in the small reset button on the side of your controller. A small screwdriver or a pen will do the trick.

How do I set the time on my XCore sprinkler system?

X-Core - Setting Date and TimeTurn the dial to the CURRENT TIME/DAY position.The current year will be flashing. Use the plus (+) or minus (-) buttons to change the year. ... The month and day will be in the display. ... The day will be flashing and the icon will be displayed. ... The time will be on the display.

How do you change the program on a Hunter sprinkler?

Press the RIGHT ARROW button until the display shows “1-b”. Press the “+” button to select the program start time (set start time 1 to 6:00 am). Press the RIGHT ARROW to advance to start time 2....Turn the dial to the START TIMES position. ... Turn the dial to RUN TIMES. ... Turn the dial to the WATER DAYS position.

How do I reset my hunter sprinkler controller?

0:040:36Pro-C Irrigation Controller Advanced: 08, Resetting Memory - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe back of the face pack you will find the reset. Button press and hold the program. And while youMoreThe back of the face pack you will find the reset. Button press and hold the program. And while you are still holding it press the reset button for a couple of seconds.

Why does one of my sprinkler zones wont turn on?

A lawn sprinkler system is usually divided into two or more zones that water independently of each other. Each zone consists of several sprinkler heads controlled by a valve that is electrically activated. If a single zone is not working, the problem is usually an electrical issue or a defective controller or solenoid.

How do I set the date and time on my hunter sprinkler system?

0:042:23HUNTER PRO C Controller (How to set the date & time) - YouTubeYouTubeStart of suggested clipEnd of suggested clipGo ahead and hit the plus or minus you know according to what year you want it to be. Next you'llMoreGo ahead and hit the plus or minus you know according to what year you want it to be. Next you'll hit the arrow here to move to the month.

How do I set the timer on my lawn sprinkler system?

0:133:41How to Program Your Sprinkler Timer - YouTubeYouTubeStart of suggested clipEnd of suggested clipBasically you have a couple of different. Program options on a sprinkler timer but at the very basicMoreBasically you have a couple of different. Program options on a sprinkler timer but at the very basic level you just want to turn each sprinkler station on for maybe start with 10. Minutes.

How do I manually start my sprinkler timer?

0:011:13Manual mode on Orbit Indoor Easy Dial Timer - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe quickest way is just to hit the manual. Button which is right here in the top left.MoreThe quickest way is just to hit the manual. Button which is right here in the top left.

How do you manually run all stations on Hunter sprinkler system?

Manual Run – All StationsPress and hold the button for three seconds. ... Select program by pressing the button.Use the or buttons to select the amount of time for the station to water if different from the run time displayed.Use the button to move to the next station.

What is seasonal adjust on a Hunter sprinkler system?

Seasonal Adjust is used to make global run time changes without reprogramming the entire controller. This feature is perfect for making small changes that are necessary as the weather changes throughout the year. For instance, during hotter times of the year, the landscape may require a bit more water.

Why does my Hunter sprinkler system keep running?

A common reason for a controller to repeat a cycle is too many programmed start times. Only one start time per active program is required, a second start time will cycle the program an additional time. NOTE: In the Start Times dial position, the numbers 1-4 do not represent stations.

How do you reset your sprinkler system?

How to Reset a Sprinkler SystemTurn the control dial to the "off" position.Press the "next" button to access the clear-memory feature. ... Press and hold the "off" button until the display stops blinking.Turn the control dial to the "run" position.Press and hold down the "minus" arrow and "prog" buttons simultaneously.More items...

Why is my sprinkler box not working?

Your Sprinkler System Is Not Getting Water Your rain sensor might be faulty. A wire might have been cut. The timer may be broken. It might not be your sprinkler system at all — your municipality may have turned the water off for repairs or due to reclaimed water being turned off during non- watering days.

How do you manually start a hunter xcore sprinkler system?

0:422:26Hunter X-CORE Manually Run All Stations - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you can use the right arrow button to select which station you want it to start on and you canMoreAnd you can use the right arrow button to select which station you want it to start on and you can use the plus button to increase the time on each of the stations.

Why isn't my hunter sprinkler system working?

Check the wiring connections at the master valves for loose or corroded connections, or a bad solenoid. If you do not have a master valve, verify that your valves have a water supply, you will need to locate your irrigation valves and turn the solenoids on the valves ¼ counterclockwise at manually activate the valves.

What is Hunter irrigation system?

The Hunter system offers a unique advantage, thanks to its innovative Smart Irrigation controller features. You can easily control and automate your sprinklers through the control system for automatic turn-on and shut-off, as well as scheduled watering times. This is based on the Hunter Run Time Calculator.

What is the Hunter Run Time Calculator?

The Hunter Run Time Calculator uses your location to calculate the amount of water you need for your lawn. The need may be based on certain times of the year. The system will ask what city you live in. If the city you live in is not in the database, you can select a nearby city.

What is smart Hunter sprinkler system?

The Smart Hunter Sprinkler system is that it monitors water usage and regional data closely to determine how much moisture your lawn needs. This helps to conserve energy and resources, cutting your water bill and helping the environment!

How many times can you reprogram Hunter sprinklers?

Hunter Sprinklers are different because you can set up four different programmed times to alternate between to solve this issue.

How much water does a sprinkler system waste?

A single crack in a sprinkler pipe can waste over 200 gallons of water a day. With a Smart Hunter system, you will know if there are any signs of issues with your system – and it can be shut off until it is repaired.

Why do sprinklers have timers?

Timer programming for sprinkler systems is great for both residential and commercial lawn care because you can just set it and forget it. This means that your lawn will be well cared for, even when you are on vacation or no one is around to manually operate the system.

How to control how long your sprinklers run?

Set the Run Times. You can control how long your sprinklers run on each station. Turn the dial to “Run Times” and highlight each start time that you want to adjust. It is recommended that you water for shorter periods in spring and fall – and longer times in the summer.

How to get the minus button off the dial?

With the dial set to START TIMES position, push the plus (+) or minus (-) button until you reach 12:00 AM (Midnight). From here push the minus ( -) button once to reach the OFF position.

How many start times are needed for a watering program?

Each program requires only one start time to initiate a watering sequence of all the stations assigned to that program. Start times are assigned to programs, not stations. The controller will operate the stations in numerical order.

How many times can you start a water station?

Each program can start up to 4 times on the set days to water. One start time will activate all stations sequentially in that program. If you want the stations to operate one time in sequential order and then not repeat, set start times 2, 3, and 4 to OFF.

Can you have multiple start times in X-Core?

Multiple start times in a program can be used for separate morning, afternoon, or evening watering cycles. Start times may be entered in any order. The X-Core will automatically sort them. FAQs, Installation Procedures.

Why is my Hunter sprinkler system not working?

When the display on your Hunter sprinkler system controller shows “Err” this indicates an issue with the installation or an interference with the SmartPort wiring. It may also be the direct result of a faulty device plugged into the SmartPort. Check the wiring to be sure that it is correct and is not bundled. Bundling wires together can cause interference.

Why won't my sprinklers open?

This could be caused by a number of reasons. If your sprinkler system’s controller displays the flashing sprinkler icon but your sprinklers are not running, you either have a wiring problem at the valves or your water supply has been shut off. If you have a master valve on your system, then the problem may be due to a master valve that won’t open. Inspect the wire connections at the master valves for any corroded or loose wires, or a faulty solenoid. If your system does not have a master valve, check that your valves have a water supply.

What does the water droplet icon mean?

A water droplet icon indicates a day that you want your sprinklers to run. A water droplet icon with a circle around it and a dash through it indicates a day that you do not want your sprinklers to run. These days will depend on the city you live in, as long as the time of the year.

How to determine the time to run sprinklers?

Make sure to factor in your local watering schedule to determine the appropriate time and day to run your sprinklers. With the dial turned to “Start Times,” use the left and right arrow buttons to switch between the first (morning) and second (evening) start times for the sprinkler.

Why does my controller repeat a cycle?

The most common reason that a controller repeats a cycle is because of an excess of programmed start times. Each active program only requires one start time. If you have a second start time programmed into the controller, the system will cycle an additional time.

Why won't my master valve open?

If you have a master valve on your system, then the problem may be due to a master valve that won’t open. Inspect the wire connections at the master valves for any corroded or loose wires, or a faulty solenoid. If your system does not have a master valve, check that your valves have a water supply.

Is Hunter sprinkler system easy to operate?

While the controller on your Hunter sprinkler system may look intimidating, it is rather easy to operate. With a greater understanding of all of the different settings and how to establish them, you can keep your landscaping healthy and maybe even save some money on your water bill!