- Remove the Simplex lock from the door by removing the three mounting screws from the interior side of the door
- Remove the two screws and flange washers securing the center plate/barrel assembly.
- Remove the two screws securing the gear plate from the lock housing.
- Remove the two screws and lift the combination chamber from the lock housing.
How do I remove the simplex lock from the door?
Remove the Simplex lock from the door by removing the three mounting screws from the interior side of the door Step 2 . Remove the two screws and flange washers securing the center plate/barrel assembly. Step 3 . Remove the two screws securing the gear plate from the lock housing.
How do I change the combination of a simplex 900 series mechanical lock?
Changing the known combination of a Simplex 900 Series mechanical pushbutton lock is accomplished with the lock remaining attached to the door. IMPORTANT: Keep the door open when changing the combination to prevent locking the door. Step 1 . Turn the outside thumbturn counterclockwise (to the left) until it stops. Then release the thumbturn.
What are mechanical push button door locks?
dormakaba Simplex series of mechanical pushbutton door locks are a trusted keyless solution. These cipher locks use a simple numeric push button code to unlock - no keys, no cards, no electronics or computers, and no batteries!
Where is the lockout slide on a simplex lock?
A lockout slide is located at one end of the chamber. Depending on the Simplex product, you must remove a set screw, unscrew a wafer lock plug or search the back of the Simplex lock to find the slide (photo 2). Depress the slide to set the chamber to a neutral position.
Where is the lockout slide on a Simplex?
Can you press two buttons at once?
How do you remove a push button lock?
Take a firm grip on the handle of the screwdriver and apply slight pressure to twist the screw counterclockwise to loosen and remove it. Repeat with the second screw. These screws are long, so it takes several turns. Once the screws are loose, it may simpler to twist them the rest of the way out using your fingers.
How do you change a Simplex lock?
0:181:34How to change your code or combination (Simplex) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe current code. Step two take your tool to the inside cylinder until you hear a click step threeMoreThe current code. Step two take your tool to the inside cylinder until you hear a click step three clear it out step four enter your new code clear it again. Couple of best practices.
How do you change the combination on a simplex push button lock?
Turn the outside knob/lever once clockwise all the way until it stops, then release. The latch should not retract (see figure 4). 6. Choose your new combination, write it down, then enter the new combination—depress buttons carefully (a slight click should be felt as each button is depressed).
How do you disassemble a Kaba lock?
1:486:39Taking apart a kaba ilco 790 door lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's got to go on the inside of that the bottom part goes on the left side of that tab and thisMoreIt's got to go on the inside of that the bottom part goes on the left side of that tab and this pulls over goes on the right.
How do you use a Simplex lock?
Turn the knob right (clockwise) a ¼ turn to open. To lock: Close the lid or door, turn the knob left (counter clockwise) a ¼ turn or less, until it stops.
How do you change a combination lock?
How to Set a Combination LockPull up the shackle to unlock.Rotate the shackle 90 degrees counterclockwise and press down.Hold down and continue to turn the counterclockwise another 90 degrees.Set your own combination by turning the dials. ... Turn the shackle back as normal then the setting is complete.More items...•
How do I change the code on my simplex 5000?
0:512:06Simplex 5000 Lock - How to Change the Combination (Exterior ...YouTubeStart of suggested clipEnd of suggested clipAnd only once to clear the old combination. The latch will retract then release the handle enter aMoreAnd only once to clear the old combination. The latch will retract then release the handle enter a new combination. Followed by the inner. Button rotate the handle. And release.
How do I change the code on my simplex 3000?
0:371:52Simplex 3000 Series PBL Code Change Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you can use two or more of the buttons at the same time as a step in the combination. NextMoreAnd you can use two or more of the buttons at the same time as a step in the combination. Next operate the external thumb turn clockwise. The latch should retract enter.
How do you reset a 4 digit combination lock?
0:522:55How to Change the Code on a Digital Combination Door Lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress the C button. But don't turn the keypad over otherwise everything will fall out with the CMorePress the C button. But don't turn the keypad over otherwise everything will fall out with the C button pressed this releases everything so that you can lift up the tumblers.
How do you open a Simplex 7100?
Insert a Phillips-head screwdriver into the central piece of the combina- tion change assembly (see figure 1). Gently turn the screwdriver to the right (clockwise) until it stops. A slight click should be felt.
How do you change the combination on a simplex 900 lock?
0:311:34Simplex 900 Series PBL Code Change Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipSide of the door and operate the thumb turn anti-clockwise fully. Once only release the turn theMoreSide of the door and operate the thumb turn anti-clockwise fully. Once only release the turn the latch should not retract enter. Your new combination.
How do you change the combination on a simplex 900 lock?
0:311:34Simplex 900 Series PBL Code Change Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipSide of the door and operate the thumb turn anti-clockwise fully. Once only release the turn theMoreSide of the door and operate the thumb turn anti-clockwise fully. Once only release the turn the latch should not retract enter. Your new combination.
How do I change the code on my simplex 5000?
0:512:06Simplex 5000 Lock - How to Change the Combination (Exterior ...YouTubeStart of suggested clipEnd of suggested clipAnd only once to clear the old combination. The latch will retract then release the handle enter aMoreAnd only once to clear the old combination. The latch will retract then release the handle enter a new combination. Followed by the inner. Button rotate the handle. And release.
How do I change the code on my simplex 3000?
0:371:52Simplex 3000 Series PBL Code Change Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you can use two or more of the buttons at the same time as a step in the combination. NextMoreAnd you can use two or more of the buttons at the same time as a step in the combination. Next operate the external thumb turn clockwise. The latch should retract enter.
Kaba Door locks Manuals and User Guides PDF Preview and Download
Download manuals & user guides for 102 devices offered by Kaba in Door locks Devices category. Choose one of the enlisted appliances to see all available service manuals.
How to Change the Combination on Kaba Combination Locks
Kaba combination locks are installed on doorways to restrict access to personnel who know the code. To maintain security, it's important to change the combination on Kaba locks when employees leave the company or if a security breach occurs. Change the combination by disassembling the lock.
How many buttons can be pressed at the same time on a push button lock?
These pushbutton locks can be programmed to unlock when pressing one button or a sequence of up to all five buttons. In addition, two or more buttons can be pressed at the same time.
Can you use two buttons at the same time on a 900 series?
In addition, two or more buttons can be pressed at the same time. However, each button can only be used once in a combination. The 900 Series has been installed mainly in light commercial and residential applications.
Does Kaba Access Control require removing the E ring?
Kaba Access Control has determined a new method for decoding an unknown combination. This new method does not require removing the “e” ring and disengaging the unlocking slide. It actually decodes the unknown existing combination. Once decoded, the combination can either be kept or cleared and a new combination can be set.
What is a simplex lock?
Simplex locks are probably one of the most popular or common combination locks for commercial applications. Unofficially, the KABA Simplex lock was originally installed by Noah on the Ark. So, chances that you’ve encountered one is very likely.
How to test a lock code?
CODE: Enter the existing code. 2. CLICK: After removing the combination change plug (inside of the lock), insert the spanner wrench or change tool and rotate clockwise until you feel/hear a “click”. 3.
Where is the lockout slide on a Simplex?
A lockout slide is located at one end of the chamber. Depending on the Simplex product, you must remove a set screw, unscrew a wafer lock plug or search the back of the Simplex lock to find the slide (photo 2). Depress the slide to set the chamber to a neutral position.
Can you press two buttons at once?
Another rule is that two or more buttons can be pressed simultaneously. Finally, all buttons do not have to be used. As example, a combination of only "1" or "4" could be used. It is also possible to press each button only half-way in.
