Follow these steps to remove an old toilet:
- Pour 1/4 cup of toilet bowl cleaner or household bleach into the toilet and flush it a few times.
- Turn off the water to the toilet and flush the toilet again, lift off the top of the tank, and set it out of the way.
How do you get rid of an old toilet?
You have a couple of options for what to do with old toilets:
- Call your local trash services or visit their website to see if they will pick up your old toilet from your curbside. ...
- Drop off the old toilet at your city’s landfill.
- Drop off the old toilet at a local recycling center that accepts porcelain. ...
How to dispose of your old toilet?
Where To Get Rid Of An Old Toilet (8 Ways To Dispose Of Your Toilet)
- Freecycle Nonprofit Organization. Have you ever heard of Freecycle? ...
- Salvage Yard. One person’s trash is another person’s treasure. ...
- Free Sign In Front Of House. If your community allows it, try putting the toilet in your driveway with a “Free” sign. ...
- Habitat For Humanity. ...
- Put Toilet On Craigslist. ...
- Repurpose Your Toilet In The Garden. ...
How to replace an older toilet?
- Shut off the stop valve, which supplies water to the tank, and flush the toilet. ...
- Disconnect the supply line from the tank, then loosen the tank bolts and remove the tank.
- Back off the nuts that connect the base of the toilet to the toilet flange below.
How to get an old toilet seat off?
Removing Seat with No Screws
- Gather the things you’ll need – hacksaw, protective wear, duct tape, rugs, and any knife.
- Open the toilet lid and cover the remaining part of the toilet with duct tape. ...
- Mark the areas you will be cutting through and sit the knife right underneath the toilet seat to guide you as you cut through.
- Begin to cut gently moving one side to the other. ...
Can I remove a toilet myself?
Removing a toilet is a relatively simple project that most DIYers can tackle either alone or with a helper. This guide will give you step-by-step instructions on how to remove a toilet. Safety Tip: Ceramic toilets are heavy, so lift with your legs, not your back, to avoid injury.
How do you remove a toilet that is not replaced?
How to Remove Your ToiletTurn Off the Water Valve and Drain the Toilet. ... Disconnect the Water Supply. ... Remove the Toilet Cistern. ... Unscrew the Mounting Nuts. ... Cut Through the Caulk and Pull the Toilet Up. ... Remove the Old Wax Ring. ... Check the Flange and Your Bowl Bolts. ... Install the New Mounting Bolts and Wax Ring.More items...
Can one person lift a toilet?
If you're working alone, it's usually easier to separate the tank from the bowl. Lifting both pieces together can be difficult for one person. Remove the bolts that connect the bottom of the tank to the bowl with an adjustable wrench. Lift the tank straight up from the bowl and set it aside.
What tool do you need to remove a toilet?
In addition, gather any equipment you need to remove a toilet such as: a sponge, bucket, utility knife, stiff wire brush, hacksaw, putty knife, wrenches, ratchet wrench and sockets, and rags.
How long does it take to remove a toilet?
Replacing a toilet is a simple and straightforward job, so you should be able to remove the old toilet and install the new one in about two to three hours. However, if you don't have a lot of DIY experience, you might want to add an hour or two to that timeframe.
Is it difficult to replace a toilet?
Difficulty: Intermediate to expert. Toilet installation requires plumbing knowledge and the right tools for the job. A DIYer who attempts toilet installation needs to have the knowledge and experience on how to troubleshoot any installation problems and avoid potential leaks and damage.
How much does Home Depot charge to install a toilet?
The Home Depot charges a standard fee of $99 for toilet installation. The charges are inclusive of the cost of the toilet, labor, and materials. However, the total cost will vary depending on the specific model of toilet you choose, as well as any additional features or services you request.
How much does a toilet weigh empty?
The average one-piece toilet will weigh roughly 100 lbs. Depending on several factors, it can weigh 20 lbs more or less. A two-piece toilet will weigh significantly less because it comes in two pieces. The bowl will be that little bit heavier than the tank and will weigh around 50 – 60 lbs.
How much should it cost to have a new toilet installed?
On average, the cost to install a toilet ranges between $400 and $800. One-piece toilet labor costs range from $100 to $300. Two-piece toilets cost slightly more to install than one-piece toilets because of the additional labor. A two-piece toilet typically costs $200 to $300 to install.
Do you have to replace the wax ring when you remove a toilet?
Whenever you remove a toilet for any reason, you will need to replace the wax ring seal between the toilet and the toilet flange (sometimes called a closet flange) attached to the floor. A wax seal is used because it resists mold and bacteria and retains its sealing ability after years of use.
Do you remove toilet before tiling?
By not removing the toilet before tiling, you'll end up making more work for yourself in the long run. You'll need to make more curved cuts and will have less room to work, as the toilet will be in your way. Tiling around a toilet base means it'll need silicone caulk or grout where the tiles meet the toilet.
Are you supposed to caulk around a toilet?
Caulk keeps your toilet secure the floor, and avoids any chance of injury or toilet malfunctioning. It's actually required by the International Plumbing Code to caulk a toilet to the floor, and now knowing the reasoning behind it, why would you not want to?
How do you remove an enclosed toilet cistern?
Here's how to access a concealed toilet cistern:Locate the toilet cistern's push button.Slightly lift the cover plate and remove it. ... Carefully remove the flushing rods located at the centre of the concealed cistern frame. ... Unfasten any plastic bolts manually to release the frame.More items...
How do you remove a toilet that is cemented to the floor?
After removing all the screws and nuts, the pan will be almost free. Stand over it, and rock it gently from side to side and the seal of wax will break. Put the toilet on a blanket in an upright position. If the pan is cemented to the floor, you'll have to use a cold chisel and drive it under the base to free it.
How do you lift a toilet for tiling?
Remove the toilet by gently rocking the bowl back and forth until it loosens from the wax ring it sits on. Firmly grasp the toilet bowl, lift up and remove it. (Lifting by the tank can cause damage or separation from the bowl.) Gently set the toilet to the side.
Do you have to replace the wax ring when you remove a toilet?
Whenever you remove a toilet for any reason, you will need to replace the wax ring seal between the toilet and the toilet flange (sometimes called a closet flange) attached to the floor. A wax seal is used because it resists mold and bacteria and retains its sealing ability after years of use.
Disconnect the Toilet Connector
Whether you are replacing a leaking toilet or temporarily removing a toilet for bathroom renovations, the first step is to drain the water from it.
Remove the Toilet Tank
If you have a two-piece toilet, separate and remove the toilet tank. If you have a one-piece toilet, skip ahead to the next step that will tell you how to remove a toilet bowl. Here’s how to remove a toilet tank:
Unbolt the Toilet from the Floor
If necessary, pry off the trim caps on the floor bolts using a screwdriver.
Break the Toilet Seal
A toilet wax ring seals the bottom of the toilet bowl to the toilet flange on the floor. You’ll have to break this seal to remove the toilet bowl.
Remove the Old Wax Ring
Scrape away the old wax from the toilet flange and the bottom of the toilet with a paint scraper. Throw away the old wax into a bucket lined with a plastic bag.
Cover the Drain Hole & Dispose of the Old Toilet
Stuff a rag into the drain hole to prevent sewer gas from seeping into your home.
What happens if you don't shut off the water when you remove the toilet?
Once the water is off, flush the toilet as many times as you need to empty the tank out. If any residual water remains inside, mop it out.
Why do toilets need to be closed off?
A toilet could need to be removed and closed off for plenty of reasons. In areas of flooding, closing a toilet drain will prevent raw sewage from flooding up and into the toilet. Also, it could be as simple as the toilet becoming no longer needed in a particular area of the house.
What to do if there are no threads on drain plug?
If there are no threads you will need to use a different kind of cap to close off the drain. Most plugs are made of rubber, but others can be wooden and will require you to pound on the top until the plug is fully seated.
How big is the drain hole on a toilet?
Measure the toilet’s drain hole across the top; almost all drain holes will be either 3 or 4 inches. This measurement is important for determining what size cap or plug you will use.
What is the wingnut on a toilet plug?
Most plugs will have a wingnut on them and once it is fastened on the pipe, simply tighten the wing nut. Finally, cap off the drain with a toilet cover. These are generally made of rubber or the cap is PVC with a rubber skirt. They cap off the drain while the skirt is clamped around the pipe with hose clamps using a screwdriver or small wrench.
Why is it important to keep your hands away from toilets?
The toilet, as well as the pipes you are dealing with, can be slippery and have some fluids on them that you will not want on your hands. It’s immensely important to have a firm grip on your tools and to keep your hands away from any liquids that can cause skin irritation or worse.
How much does a toilet weigh?
If your toilet allows you to unbolt the tank from the bowl, it will make it easier to carry the pieces away when you’re finished. Toilets can weigh up to 100 pounds, so this can save a ton of back pain if yours is manufactured this way.
