Disassembling the Troy-Bilt Trimmer Head Disconnect the boot from the spark plug by pulling it. Then check under the trimmer head for the locking rod slot. Insert the locking rod or Allen wrench into the locking rod slot. Hold the tool in one hand while the other hand grasps the trimmer head firmly. Turn the trimmer head clockwise to unscrew it.
Full Answer
How do I replace the head on my Troy-Bilt Trimmer?
Push down on the bump knob while screwing it in place to ensure it threads properly onto the shaft. To replace the entire trimmer head on your Troy-Bilt trimmer, start by looking for a hole in the shaft and/or on the spindle just above the shaft. If needed, rotate the trimmer head to align a second inner hole with the outer hole.
How does a Troy Bilt Trimmer work?
Troy-Bilt Trimmer is a two in one trimmer. It works both as a brush cutter and a grass cutter and comes with two attachments. Therefore, the machine can only work with one head at a time. The brush cutter is designed to trim woody items and tough vines. While the grasscutter is a handy tool for basic trimming jobs.
How to remove a lawn mower trimmer head?
Then check under the trimmer head for the locking rod slot. Insert the locking rod or Allen wrench into the locking rod slot. Hold the tool in one hand while the other hand grasps the trimmer head firmly. Turn the trimmer head clockwise to unscrew it. By unscrewing it, the head gets lifted off from the trimmer shaft.
What is the part number for a Husqvarna tb32ec carburetor?
The model number YTH 2348 is a Husqvarna Riding Lawn Mower. If your Troy-Bilt Trimmer is model number TB32EC, your carburetor is part number 753-06190. Is there a special tool to adjust the carburetor on the TB32EC? My trimmer doesn't idle and need to run full throttle to stay on. Your trimmer carburetor may be in need of new diaphragms.
How do I remove trimmer head on Troy Bilt?
0:491:58Replacing the Cutting Head (Troy-Bilt Part # 753-08182) - YouTubeYouTubeStart of suggested clipEnd of suggested clipRun it counterclockwise to remove it. Now install the new trimmer head and again remember it is aMoreRun it counterclockwise to remove it. Now install the new trimmer head and again remember it is a reverse thread. I'll lock the spindle in place and tighten up the head.
How do I take my trimmer head off?
1:113:17Trimmer Repair - Replacing the Gear Head (Ryobi Part # 308210009)YouTubeStart of suggested clipEnd of suggested clipSo you'll turn the trimmer head clockwise to remove it on most trimmers there'll be a notch on theMoreSo you'll turn the trimmer head clockwise to remove it on most trimmers there'll be a notch on the side like this one has that you'll insert a screwdriver.
How do you take apart a grass trimmer?
0:002:16HOW TO Remove Homelite Grass Trimmer Head - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut don't tighten it too much because you can bend the metal casing. The first thing you need to doMoreBut don't tighten it too much because you can bend the metal casing. The first thing you need to do is to remove the knob. Completely.
How do you open a strimmer head?
0:303:58How to Replace a String Trimmer Head - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you know basically what happens is all most of them they have a little hole it'll either be onMoreSo you know basically what happens is all most of them they have a little hole it'll either be on the side of the of this little cylinder or on this one it's on the top.
How do I change the head on my beard trimmer?
0:050:42How to change My Perfect Goatee Beard Trimmer heads - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then just pop it back on. And push it together if you don't line them up then it could bend theMoreAnd then just pop it back on. And push it together if you don't line them up then it could bend the pins inside. And if the pins get bent don't worry as a company. They will replace it.
How do you unlock a Ryobi trimmer head?
Grasp the shaft housing firmly with your left hand. With your right hand, wiggle the cutting head while gently pulling it upward. Continue this motion, until it slips off the large hex nut it nestles on.
How do I change the string on my trimmer?
0:001:50How to replace string trimmer edger line - YouTubeYouTubeStart of suggested clipEnd of suggested clipEven though you might have a different brand most string trimmers work generally the same. You canMoreEven though you might have a different brand most string trimmers work generally the same. You can either pinch off the cap like this one or sometimes it's a pinch and twist or just a twist.
How do you remove the head of a Husqvarna trimmer?
0:121:15Husqvarna String Trimmer Trimmer Head Replacement #537338307YouTubeStart of suggested clipEnd of suggested clipUse channel lock pliers to secure the dust cap and a strap wrench to help unthread the old trimmerMoreUse channel lock pliers to secure the dust cap and a strap wrench to help unthread the old trimmer head by rotating it counterclockwise be careful not to cut yourself on the cutting.
Why is the Troy Bilt head disassembled?
Every device has a lifespan. The device is also usually disassembled to remove clogged weeds that get wrapped on the drive shaft. In conclusion. It is important to read the user manual every time you are changing heads until you become familiar with the whole process of removing the Troy-Bilt Trimmer Head.
How to cool down Troy Bilt trimmer?
A flat surface is preferred. Take safety measures by wearing gloves and safety glasses. You then need to turn off the power on the Troy-Bilt trimmer, if it was in use. Give it a few minutes to cool down completely.
What is the locking rod on a Troy Bilt?
The locking rod is usually part of the Troy-Bilt Trimmer package when purchasing a new Troy-Bilt Trimmer. You can use an Allen wrench if you have misplaced the locking rod. Make sure you have a box for placing screws and other components that will be disassembled.
What tools do you need to use a Troy Bilt trimmer?
The working tools include a flat-head screwdriver and a locking rod. The locking rod is usually part of the Troy-Bilt Trimmer package when purchasing a new Troy-Bilt Trimmer. You can use an Allen wrench if you have misplaced the locking rod. Make sure you have a box for placing screws and other components that will be disassembled. Moreover, you need to be careful to pick your best one while purchasing so that you get the best performance from the trimmer.
What is a Troy-Bilt trimmer?
Troy-Bilt Trimmer is a two in one trimmer. It works both as a brush cutter and a grass cutter and comes with two attachments. Therefore, the machine can only work with one head at a time. The brush cutter is designed to trim woody items and tough vines. While the grasscutter is a handy tool for basic trimming jobs.
When to remove a brush cutter head?
You need to remove the head when mainly interchanging the heads-from brush cutter to grass cutter or vice versa or when replacing a faulty trimmer head. If the trimmer is faulty, the defective head has to be replaced with a string trimmer replacement head, either a brush cutter or grass cutter. Whichever is defective?
When to remove head on a drive shaft?
You can also remove the head when doing your routine maintenance, when troubleshooting for a possible defect, or when unclogging the drive shaft from weeds.
Where is the head of a Troy Bilt lawn trimmer?
The trimmer head, located at the bottom end of the trimmer body , holds and spins the trimmer string that cuts weeds. Trimmer heads can break, particularly if you repeatedly bang the head against a hard surface to get ...
How to remove trimmer head from spindle?
Slide the trimmer head fully down the trimmer spindle head and spindle head stops. Pull the trimmer head downward, free from the trimmer spindle head.
How to stop a trimmer engine?
Stop the trimmer engine, turn the trimmer engine ignition switch to the off position and remove the key. Pull the engine spark plug wire from the spark plug by hand to prevent accidental engine starting when removing and replacing the trimmer head.
Where are the retaining bolts on a trimmer head?
The retaining bolts are located on each side of the trimmer head, opposite where the trimmer head string protrudes from the trimmer head.
Can a trimmer head break?
Trimmer heads can break, particularly if you repeatedly bang the head against a hard surface to get the head to release new string. Fortunately, the trimmer head is a serviceable and replaceable part that you can fix yourself.
Can you loosen trimmer bolts?
Loosen the trimmer retaining bolts only, but do not loosen or remove the trimmer head retaining bolt nuts. Writer Bio. A former cake decorator and competitive horticulturist, Amelia Allonsy is most at home in the kitchen or with her hands in the dirt. She received her Bachelor's degree from West Virginia University.
Which way do Troy Bilt trimmers unscrew?
Advertisement. Note that some Troy-Bilt string trimmer heads have reverse threads; they unscrew clockwise instead of counterclockwise, so try both directions if you don't seem to make headway.
What is a Troy Bilt trimmer?
Troy-Bilt offers multiple trimmer heads for its line of string trimmers, including the SpeedLock trimmer head. Also called cutting heads or bump heads, these parts tend to crack or wear out, even with normal use. Troy-Bilt trimmer heads are designed for easy, user-friendly removal and installation. In some cases, the only tools you might need are ...
How to attach Speedlock trimmer head?
If you want to attach the SpeedLock trimmer head, you only need to remove the bottom half of the current trimmer head. You can leave the upper portion of the cutting head on the shaft. Notice that the bottom of the head consists of two circles: a larger circle with a smaller circular knob (the "bump knob") in the center.
Why do you need to wear eye protection when disassembling a trimmer?
Because the head contains a spring that's under pressure, wear eye protection when disassembling the trim head. Never work on the trimmer while its engine is running. Disconnect the trimmer attachment from the engine to avoid any mishaps should the trimmer turn on unexpectedly. Advertisement. references.
How to get a large circle out of a knob?
Look for tabs on the side of the larger circle and if you find them, push on the top tab with your thumb and depress the bottom tab with a flat-head screwdriver to release it. Repeat on all tabs until the large circle comes free and then push two additional tabs on the knob head.
