- Step 1 . Turn the outside thumbturn counterclockwise (to the left) until it stops. ...
- Step 2 . Enter the combination. ...
- Step 3 . Use the included 1/8” hex wrench and remove the screw.
- Step 4 . Slide the long end of the hex wrench into the opening and press the internal lockout slide. ...
- Step 5 . ...
- Step 6 . ...
- Step 7 . ...
- Step 8 . ...
How do you reset your lock combination?
- Open the lock using the previous combination. …
- Insert the reset tool in the hole on the side of the lock. …
- Push the reset tool in and turn 90° in either direction. …
- Set wheels to your new combination.
- Turn and remove the reset tool. …
- Record your combination in a safe place.
How to change combination on a simplex Kaba lock?
Kaba Simplex 1000 Lock Change Code. CAUTION: The door MUST BE open during this entire procedure. Step 1: Insert the DF-59 control key into the combination change plug assembly (located on the back) and unscrew the cylinder by turning the key counterclockwise. Step 2: Turn the outside knob once clockwise (all the way, until it stops) then release.
How to open a simplex lock?
- Open the door. Remove the screw from the top of the lock housing with the Torx bit provided with your lock.
- Turn the doorknob clockwise until it stops, then release it. Input the current combination.
- Turn the doorknob clockwise as far as it will turn then release it.
- Replace the screw in the top of the lock housing.
How to reset your combination lock?
What to Do
- If the lock is closed, open it by applying pressure to the lock. ...
- Turn the dials of the lock while listening to the clicking sounds. To get the right numbers of your combination, turn the dials of the lock. ...
- After opening the lock, set the dials into 000. ...
- Turn and push the shackle then put in your desired combination. ...
How do I change the combination on my simplex?
1:112:54Simplex 1000 / L1000 Lock - How to Change the Combination - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse the factory set combination by depressing 2 & 4 simultaneously. And then release. Then press 3MoreUse the factory set combination by depressing 2 & 4 simultaneously. And then release. Then press 3 and release.
How do I reset my Simplex 7000 Lock?
0:151:33Simplex 7000 Series PBL Code Change Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd release it the latch should not retract enter the existing code on the internal side of the unitMoreAnd release it the latch should not retract enter the existing code on the internal side of the unit insert the screwdriver into the top escutcheon. Turn clockwise until the stop.
How do I change the combination on my simplex 5000?
0:512:06Simplex 5000 Lock - How to Change the Combination (Exterior ...YouTubeStart of suggested clipEnd of suggested clipAnd only once to clear the old combination. The latch will retract then release the handle enter aMoreAnd only once to clear the old combination. The latch will retract then release the handle enter a new combination. Followed by the inner. Button rotate the handle. And release.
How do you change the code on a simplex 900 lock?
0:151:34Simplex 900 Series PBL Code Change Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipSide of the door and operate the thumb turn anti-clockwise fully. Once only release the turn theMoreSide of the door and operate the thumb turn anti-clockwise fully. Once only release the turn the latch should not retract enter. Your new combination.
How do I change the combination on my simplex 1000?
Turn the outside knob/lever once clockwise all the way until it stops, then release. The latch should not retract (see figure 4). 6. Choose your new combination, write it down, then enter the new combination—depress buttons carefully (a slight click should be felt as each button is depressed).
How do you open a Simplex lock?
Turn the knob right (clockwise) a ¼ turn to open. To lock: Close the lid or door, turn the knob left (counter clockwise) a ¼ turn or less, until it stops.
How do you change the code on a push button lock?
How to Change the Code on a Push Button Door Lock? – 6 StepsStep 1: Open the door before changing your code.Step 2: Dial your current code.Step 3: Insert the change tool.Step 4: Clear your current code by turning the lever clockwise once.Step 5: Enter your new combination.Step 6: Turn the lever clockwise once.
How many combinations does a Simplex lock have?
Opening a Simplex Lock You try all 1,082 possible combinations. It may seem difficult at first, but with some practice you should be able to open most Simplex locks in under ten minutes.
How do you change the combination on a cipher lock?
How to Change a Cipher Lock ComboInsert the lock's control key into its combination change plug assembly, located just beneath the keyhole. ... Pull the combination change plug out and set it aside. ... Turn the outside knob one time in a clockwise direction. ... Enter the current combination using the lock's keypad.More items...
How do I reset my Simplex fire panel?
Reset the panel by hitting the "reset" button. The system resets only if no active alarms are going off at the time. So any bad sensors or false alarms need to be taken care of before the system resets itself. The reset may eliminate glitches in the panel and get everything working properly again.
How do Simplex locks work?
You enter the existing combination, either the factory setting it came to you on, or whatever you have it set to now. After you enter that code you turn your knob to the right clockwise and that opens it. Once you have it opened, you are going to turn it back left counterclockwise to lock it.
What happens if the safe box is not the same as the 9600 series?
If the default is not the same as the 9600 series cabinet lock then the manufacturer of the safe box as set a new default combination - try the safe box manufacturer for more information.
Can you diagnose a lock without a combination chamber?
Sounds like zero combination per the instructions, but couldn't diagnose without having the lock on the service bench. You can send it in for diagnosis or seek out a local Locksmith. You might email our customer service department for more insight.
Do you need a bypass code to reset a lock?
You will need the current working combination and the access key in order to change the code. Sorry, there are no bypass codes, or secrect codes to reset the lock when you do not know the combination.
What is a simplex lock?
Simplex locks are probably one of the most popular or common combination locks for commercial applications. Unofficially, the KABA Simplex lock was originally installed by Noah on the Ark. So, chances that you’ve encountered one is very likely.
How to test a lock code?
CODE: Enter the existing code. 2. CLICK: After removing the combination change plug (inside of the lock), insert the spanner wrench or change tool and rotate clockwise until you feel/hear a “click”. 3.
What is a simplex lock?
Simplex Unican door locks use push button combination lock mechanisms to secure doors. Adding Simplex Unican locks to your doors eliminates the need to carry keys, reducing the risk of loss, misplacement and theft. Change the lock combination regularly to ensure added security, reducing the risk of compromising the combination. There is no need to hire a locksmith to reset the combination. Adjust it yourself in minutes.
How to change the lock on a doorknob?
Turn the doorknob clockwise as far as it will turn then release it. Input the new combination. Turn the doorknob clockwise. Hold it and make sure that the door latch retracts completely. Release the doorknob then turn it clockwise one more time. Check the latch to be sure it does not retract this time.
