How to reset the modem The preferred method to reset your modem is by logging into the user settings interface. If this isn't an option, you can do it manually using the reset button on the back of the modem.
Full Answer
How do I reset my modem to factory settings?
Release the button when the power light turns amber (orange) . Note that if you continue to press the reset button for 15 seconds, then the power light will turn red and your modem will reboot. If this happens, you will need to wait for it to finish rebooting, then try the reset again.
How do I Reset my AT&T U-verse modem?
Hold the reset button on the AT&T router for at least 10 seconds to restore factory settings. Wait for all of the lights to turn green, then double-check that the broadband or status light remains solid green. The AT&T U-verse modem will not reset its factory settings if you don’t press the button down long enough, however it may reboot.
How do I restart my Wi-Fi gateway or modem?
Select Wi-Fi Gateway and then Restart. Unplug the power cord from the back of your gateway or modem. If you have an internal battery backup, remove it. If you have DSL, unplug your phone cord from your modem or gateway. Wait 20 seconds. Put the internal battery back in, if you have one. Plug the power cord back in.
How do I Reset my router to default settings?
Press the Power button on the back of the router to power off the router. This is a small black button near the power cable. Wait a few seconds, then press the button again to power on the router. Wait a couple of minutes for the router to complete its start-up procedures. The Power and broadband lights should be a steady green.
Can you reset a fiber optic modem?
Powercycle a Fiber device Unplug its power cord. Wait at least 10 seconds. Plug the power cord back in to the device. Wait 2-3 minutes for the LED to turn to solid blue.
How do you reset a fiber optic box?
Press the power button for 15 seconds or unplug the power cord from the equipment for 10 seconds; then plug it back in. Do this for each of your Set-Top Boxes. Note: To avoid problems with your Fiber TV service, keep your router plugged in and turned on at all times.
What happens if you reset your Fibre router?
It's important to note that when you reset your home router you will lose all of your current network settings, like the name of the Wi-Fi network, its password, etc. (So don't do this just for fun!)
How do I manually reset my modem?
Power on your cable modem. Insert a straightened paper clip into the Reset button, and press and hold for about seven seconds until all LEDs blink. Release the Reset button. Your cable modem's configuration is reset to factory default settings.
Why is my fibre not connecting to internet?
What are the possible causes of Fibre issues? You may be connected to a faulty port. A Fibre optic cable can bend, twist, or wind causing a disconnection. The cable may be stretched which will result in damage to the cable.
Why is my fiber optic internet not working?
The most common causes of this are loss of power to the fiber terminal (ONT) or an unplugged network cable. Start by checking the connections to the back of the modem: Make sure you have an Ethernet cable plugged fully into the WAN port on the back of the modem.
How do I reconnect my router after reset?
After pressing the Reset button, unplug and re-plug the router's power adapter. NOTE: The Power LED of the router will keep on blinking for a few seconds after resetting as it is still trying to stabilize. However, if the Power light still isn't solid after a minute, powercycle the router.
Will resetting my router mess up my internet?
Resetting your router is one of the first things you should try if your internet goes down. Restarting your router will reset your connection settings, interrupt malicious attacks on your network, and boot off unwanted devices from your network.
What does resetting your modem do?
A reset restores your modem to its factory default settings. It will also erase any customized settings you may have changed, including static IP address setup, DNS, personalized password, WiFi settings, routing and DHCP settings.
How do you do a hard reset on a router?
Locate the Reset button on the back of your router. With the router powered on, use the pointed end of a paperclip or similar object to press and hold the Reset button for 15 seconds. Wait for the router to fully reset and power back on.
Why do I have to reset my modem?
Rebooting your modem can fix Internet connection problems, improve slow moving connections and resolve wireless issues, which also affect your Digital TV service that is being transmitted over an internet connection.
How do I restore my internet connection?
Restart your device. Open your Settings app and tap Network & internet or Connections. Depending on your device, these options may be different. Turn Wi-Fi off and mobile data on, and check if there's a difference. If not, turn mobile data off and Wi-Fi on and check again.
How do you reset a set top box?
0:090:49Running Through A Set Top Box Power Reset - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd hold down the power button for 15 seconds. Any remaining power will be drained. Wait for 15MoreAnd hold down the power button for 15 seconds. Any remaining power will be drained. Wait for 15 seconds before plugging the set-top box back in and switching on as normal.
How do you reset quantum fiber?
How to reset the modemWait 3 to 5 minutes for the modem to complete the reset.You may see the lights flash as the modem boots back up. Once the light ring turns green (or the internet light, in the case of a 3000 series modem), you're back online.You will need to reconnect all of your devices to your WiFi network.
Where is the ONT box?
An Optical Network Terminal, or ONT, is a unit typically located on the side of your house or in your garage. An ONT converts the signals from fiber optic light into copper and electric signals. ONTs have a power supply connected to an external battery backup enclosure. The power supply is often located in the home.
How do I reset Metronet?
Great news—many instances can be resolved by a simple reboot. Simply disconnect your Metronet equipment from the wall outlet, leave it disconnected for 10 seconds and then reconnect.
How to reset AT&T router?
Hold the reset button on the AT&T router for at least 10 seconds to restore factory settings. Wait for all of the lights to turn green, then double-check that the broadband or status light remains solid green. The AT&T U-verse modem will not reset its factory settings if you don’t press the button down long enough, however it may reboot.
What should the lights on my ATT Uverse modem be?
The WiFi Gateway is turned on if the power indicator is solid green. If the power light is blinking red, the machine is doing a self-test to ensure appropriate operation. The solid red power light indicates a problem, it indicates a problem: the device is unable to boot up or a fault has occurred.
How to fix a blinking red light?
Resetting the modem and inspecting wires and connections is advised if you have a Blinking or Solid Red Broadband light: Reset your modem: For 20 seconds, press and hold the reset button on the modem’s back. This might get your services up and running. Examine the connections: they might become loose if knocked into.
How to connect a gadget to an AT&T gateway?
Connect your gadget Connect an Ethernet wire from your router’s internet connection to the AT&T gateway’s yellow Ethernet connector. Check to see if your router is on the same network as the AT&T gateway. This may result in IP address conflicts. The AT&T gateway is configured to 192.168. x by default.
How to connect to AT&T broadband?
Here’s how to get your AT&T connection up and running: Connect one end of the green wired connection to your gateway’s green broadband port. Connect the other end to your wall’s AT&T Broadband jack. Plug the black power wire into an electrical outlet and connect it to the rear of your gateway.
What to do if you don't have AT&T?
If you don’t have AT&T, contact your own internet provider.
Can I use my own router with AT&T?
As a result, we had AT&T come out and replace the router with a somewhat better one. However, according to the firm, you may still connect your own Wi-Fi router to one of the gateway’s LAN ports and use that for wifi instead of the Wi-Fi that comes with AT&T’s gateway.
How to reset your Wi-Fi gateway
Before performing a factory reset that deletes your custom settings, try to reboot your Wi-Fi gateway.
Reset your gateway
Heads up: Be sure to make note of any custom settings, like your static IP address if you have one, or your Wi-Fi ® network name (SSID). You can then reapply them after the factory reset.
How to power off a router?
Press the Power button on the back of the router to power off the router. This is a small black button near the power cable. Wait a few seconds, then press the button again to power on the router. Wait a couple of minutes for the router to complete its start-up procedures.
How to turn on router when it's ready?
Wait a couple of minutes for the router to complete its start-up procedures. The Power and broadband lights should be a steady green. Wait for the internet light to come on/turn green. Finally, when the router is ready, turn on your computer and wait until the desktop has fully loaded. Then turn on your other devices.
How to reset Plusnet router?
How to reset your Fibre modem and router 1 Power off your Plusnet router 2 Power off your Openreach fibre modem 3 Wait for 20 seconds after they’ve both been turned off 4 Power on your Openreach fibre modem 5 Wait for the lights to settle, (the LAN light on your modem will only come on when you re-connect your Plusnet router) 6 Power on your Plusnet router 7 Wait for the lights to settle, (the power and broadband lights should turn solid green and the internet light should be green but may flash)
What color should the internet light be?
Wait for the lights to settle, (the power and broadband lights should turn solid green and the internet light should be green but may flash)
How to reset modem?
How to reset the modem through the user settings (Preferred) 1. Connect a device, such as a computer or tablet, to the internet through WiFi or using an Ethernet cable connected to your modem. 2. Open a web browser and type http://192.168.0.1 into the web address field. 3.
Where is the reset button on a modem?
How to reset the modem manually with the RESET button. The reset button is typically red and can be found on the back of the modem . To reset your modem using the button, follow these steps: 1.
What to do if modem isn't working?
If your modem isn't working right, or if you changed some settings you can't undo, you may decide it's time to reset your modem to its default settings. Before you do, however, it's always worth doing a simple reboot first.
What happens if you factory reset your modem?
Important note: If you customized your modem login information at any point, performing a factory reset will cause the network name (SSID) and password to revert back to what they were when you received the modem. These are shown on the modem sticker, and you will need to use these original login credentials the first time you log into the network again.
What happens when your modem light turns green?
You may be asked for account login information to configure your modem. 5. Once the internet light turns green, you will be able to access the internet. 6.
What does the modem sticker mean?
The modem sticker shows you TWO important sets of login credentials. How do you use each one?
