How do I reset my Hayward Aqua Rite 900?
- Turn Salt System Off and On. With the pump running, take the power switch down to the “Off” position, and then back up to “Auto”.
- Average Salt Reading. Wait until the numbers stop changing.
- Assess the Salt Cell Reading.
How do I Reset my Hayward aquarite?
May 16, 2020 · How do I reset my Hayward Aqua Rite 900? Turn Salt System Off and On. With the pump running, take the power switch down to the “Off” position, and then back up... Average Salt Reading. Wait until the numbers stop changing. Assess the Salt Cell Reading.
How to recalibrate salt level on a Hayward Aqua rite?
Jan 19, 2020 · How do I reset my Hayward AquaRite? Reset AquaRite Salt Chlorination Inspect Cell Light If the Inspect Cell Light is the only LED light flashing, then you can reset it by simply holding down the diagnostic button for 3 seconds, then release. The Inspect Cell indicator will now reset and will later come back on after another 500 hours of use.
How do I Reset my aquarite salt chlorination inspect cell?
After you inspect the cell (and clean, if necessary) press the small "diagnostic" button next to the display for 3 seconds to stop the flashing. "Inspect Cell" LED and start the timer for the next 500 hours. The AquaRite electrolytic cell has a self cleaning feature incorporated into …
How does the aquarite® 900 work?
Reset AquaRite Salt Chlorination Inspect Cell Light If the Inspect Cell Light is the only LED light flashing, then you can reset it by simply holding down the diagnostic button for 3 …
How do I reset my aqua rite?
To reset, turn the unit to Off and then back to Auto. Wait for the relay to click (5 to 10 seconds).
How do you reset a Hayward salt system?
1:022:17Recalibrating an Aquarite Salt Chlorine Generator - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst step slide the main switch to the auto. Position. Second step push the diagnostic button untilMoreFirst step slide the main switch to the auto. Position. Second step push the diagnostic button until a T number appears on the display.
How do you recalibrate Aqua Rite salt Cell?
Turn Salt System Off and On With the pump running, take the power switch down to the “Off” position, and then back up to “Auto”. You should hear a click within 10 or 15 seconds. When you do, press the diagnostic button five times in a row. The system will go through a recalibration process.
How do you reset the check system on a Hayward Pool?
You must reset the system by entering the 'Diagnostic Menu' and then hitting the right arrow key once and then pushing the plus key once. This should reset the light and message.
How do you troubleshoot a Hayward Aqua Rite?
1:184:19How To: Troubleshoot a Hayward AquaRite - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe high salt LED is illuminated. Check the salt level with a test kit if the salt level is too highMoreThe high salt LED is illuminated. Check the salt level with a test kit if the salt level is too high lower. It by draining some of the pool water via the pools wastewater.
How do I inspect my Hayward AquaRite 900?
0:000:56Aqua Rite Inspect Cell - YouTubeYouTubeStart of suggested clipEnd of suggested clipBasically what you want to do is you have to take the diagnostic. Button press it and hold it downMoreBasically what you want to do is you have to take the diagnostic. Button press it and hold it down for about 10 seconds and you'll see it disappears.
How do you adjust a Hayward chlorinator?
0:141:09How to Operate your Hayward Chlorinator - YouTubeYouTubeStart of suggested clipEnd of suggested clipProducts begin by turning off the electricity to your pump motor. Open the top lid of theMoreProducts begin by turning off the electricity to your pump motor. Open the top lid of the chlorinator by depressing the locking tab and by turning the cover counterclockwise.
What should my salt chlorinator be set at?
around 3,000 to 4,000 ppmIf you're using the Water TechniX Salt water chlorinator then you should try to aim for a salt level of around 3,000 to 4,000 ppm.Aug 19, 2020
How do I know if my chlorinator cell is working?
1:252:22Tip 3 - How to check if your salt cell is working - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat we're doing here and we turn it on is we're looking for bubbles or a fizzing. Effect. Once weMoreWhat we're doing here and we turn it on is we're looking for bubbles or a fizzing. Effect. Once we see the bubbles. And the fizzing. We know that it's actually working.
How do I unlock my Hayward configuration menu?
Press the 'Menu' until, 'Configuration Menu-Locked' appears. To unlock, press and hold the (<) & (>) until the text, on the display, changes from 'Locked' to 'Unlocked' (unit will beep).
What does check cell mean on pool pump?
If both the “check salt” and the “inspect cell” lights stay on, it most likely means that no chlorine is being produced at this time and your salt level fell below 2300 ppm. Both lights will also stay on if the controller is set to the wrong turbo cell type, or if the cell is unplugged.
How do you set the timer on a Hayward Aqua Plus?
3:204:31Programming - Timers - Aqua Plus - Pro Logic - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress the plus or minus button to set the start. Time. Press the right-arrow button press the plusMorePress the plus or minus button to set the start. Time. Press the right-arrow button press the plus or minus button to set the shut off. Time. Press the right-arrow button.
Reset AquaRite Salt Chlorination Inspect Cell Light
If the Inspect Cell Light is the only LED light flashing, then you can reset it by simply holding down the diagnostic button for 3 seconds, then release. The Inspect Cell indicator will now reset and will later come back on after another 500 hours of use.
How Much Salt Belongs In Your Pool
Not sure how much salt belongs in your pool? Find out by using the Hayward Water Chemistry Calculator, here.
The New Salt Cell
Hayward is excited to add a new option to the Genuine Hayward TurboCell Family – the Extended Life TurboCell. With this new TurboCell, you’ll experience the amazing comfort of silky water that won’t irritate your eyes or dry out your skin.
How to recalibrate Aqua Rite?
Before recalibrating, test the water with salt water test strips to determine the correct salt level. If the results from your test strip are not the same as the Aqua Rite, proceed to step 2. Click Here to View Salt Test Strips.
Can you recalibrate Hayward Aqua Rite?
Occasionally the salt level on the Hayward Aqua Rite may not match the actual salt level of the pool. If the salt cell is clean but the salt reading is off, the Aqua Rite will need to be recalibrated. The following steps will provide a guide on how to recalibrate a Hayward Aqua Rite. Click Here to View Replacement Aquarite Parts.
Step 1
Push 1 - To set up for changing units, push the Diagnostic Button one time to display water temperature. The temperature shown is 89 degrees Fahrenheit.
Step 2
SLIDE MAIN SWITCH UP - Slide the Main Switch from Auto to Super Chlorinate. You will see the temperature change to 32 degrees Celsius.
Step 3
SLIDE THE MAIN SWITCH DOWN - Slide the Main Switch back down to "Auto" to save the new units change. Note: this will also change Salt Level Units to Metric values.
