How to Reset Hayward Salt Cell
- Touch and hold the MENU/ENTER button on the cell
- Press the UP OR DOWN arrow to calibrate salt
- Touch and hold the MENU/ENTER button on the cell again
- Modify the salt display to correlate with the reading test by holding the arrows UP OR DOWN
- Touch and hold the MENU/ENTER the button to hook the modified calibration and go back to the main display.
How do I Reset my aquarite salt chlorination inspect cell?
Reset AquaRite Salt Chlorination Inspect Cell Light If the Inspect Cell Light is the only LED light flashing, then you can reset it by simply holding down the diagnostic button for 3 seconds, then release. The Inspect Cell indicator will now reset and will later come back on after another 500 hours of use. How Much Salt Belongs In Your Pool
How do I Reset my Hayward salt cell?
To reset your Hayward Salt Cell, position the switch to off and then turn back to Automatic. After that, you will need to be patient for five to ten seconds for the relay to click. During the point when the instant salt level is steady (and the negative indication is actually present), twist the switch to ‘Super Chlorinate and back to Automatic.
How often should I clean my salt chlorinator cell?
SUPPORT CENTER GO BACK Contact Us Pool FAQs Download Center Blog Reward Program Site Help Home POOLSIDE Blog Maintenance How to Reset Inspect Cell Light How to Reset Inspect Cell Light Aqua Rite salt chlorinator has a built in reminder to inspect and clean the cell every 500 hrs.
How to recalibrate salt level on a Hayward Aqua rite?
How To Recalibrate the Salt Level on a Hayward Aqua Rite Step 1. Before recalibrating, test the water with salt water test strips to determine the correct salt level. Step 2. With the pump running, move the main switch from "Auto" to "Off" and then back to "Auto". Wait for approximately... Step 3. ...
How do I reset my pool salt chlorinator?
To reset, move the switch to 'Off' and then back to 'Auto'. Wait for the relay to click (5 to 10 seconds). When the instant salt level is stable (and the negative sign still present), slide switch to 'Super Chlorinate' and back to 'Auto'. It takes about 30 seconds for the unit to settle back on the default reading.
How do I reset my chlorinator?
0:141:31Chlorinator reset. Having electrical issues with your Hayward unit. Pure ...YouTubeStart of suggested clipEnd of suggested clipAnd the down. Gives it a reset. So you've got to hold it for a bit. And then it'll go through it'sMoreAnd the down. Gives it a reset. So you've got to hold it for a bit. And then it'll go through it's little numbers go through its setup. Then you release that. And it has reset.
How do I reset my salt generator?
1:022:17Recalibrating an Aquarite Salt Chlorine Generator - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst step slide the main switch to the auto. Position. Second step push the diagnostic button untilMoreFirst step slide the main switch to the auto. Position. Second step push the diagnostic button until a T number appears on the display.
How do I reset my Hayward pool?
Hayward pool heaters can be reset through the circuit breaker by simply unplugging all connected devices and turning the breaker off and on. When resetting through the interface keypad, just press the MODE button and set the heater on STANDBY before returning it to either SPA or POOL mode.
How do I reset my Hayward Aqua plus salt?
You must reset the system by entering the 'Diagnostic Menu' and then hitting the right arrow key once and then pushing the plus key once. This should reset the light and message.
How do I know if my Hayward salt cell is working?
0:252:22Tip 3 - How to check if your salt cell is working - YouTubeYouTubeStart of suggested clipEnd of suggested clipUp we're looking to see the green lights. Come on as soon as the water is pumping through the systemMoreUp we're looking to see the green lights. Come on as soon as the water is pumping through the system.
Why is my salt chlorinator not working?
The saltwater chlorinator needs a sufficient flow of water for effective operation. A dirty skimmer basket, clogged or dirty filter, and a clogged pump strainer, can cause insufficient water flow for the chlorinator to produce less chlorine.
How do you know if your chlorinator is not working?
Test the water that water has just left the chlorinator - it should have a very high chlorine reading. (Remember that if it is extremely high it may bleach the test tablet so you may have to dilute the water you are testing). If there is no chlorine reading, the chlorinator will not be working.
What should my Hayward salt generator be set at?
The ideal salt level is between 2700-3400 ppm (parts per million) with 3200 ppm being optimal.
How do you calibrate a Hayward salt tester?
1:094:46Pocket Pro Salinity Tester #9531600 by Hach® - YouTubeYouTubeStart of suggested clipEnd of suggested clipYeah we're going to put the unit calibration mode by hitting this center button here. You see thatMoreYeah we're going to put the unit calibration mode by hitting this center button here. You see that little arrow on the far left hand and leads us in calibration mode.
How do I program my Hayward salt?
0:333:50AquaRite Settings and Frequently Asked Questions - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress the diagnostic button four times. You'll notice the value changes has the dial is adjusted.MorePress the diagnostic button four times. You'll notice the value changes has the dial is adjusted.
How do I know if my salt cell pool is bad?
Further troubleshooting will be required.If the salt cell bubbles, but only a little bit, then you probably have a bad cell. ... If the salt cell bubbles vigorously, then it is working fine.If the salt cell is good, but you are are constantly getting a zero chlorine reading in the pool, something else is wrong.
Why is my automatic chlorinator not working?
The saltwater chlorinator needs a sufficient flow of water for effective operation. A dirty skimmer basket, clogged or dirty filter, and a clogged pump strainer, can cause insufficient water flow for the chlorinator to produce less chlorine.
How do you know if your chlorinator is not working?
Test the water that water has just left the chlorinator - it should have a very high chlorine reading. (Remember that if it is extremely high it may bleach the test tablet so you may have to dilute the water you are testing). If there is no chlorine reading, the chlorinator will not be working.
How do I know if my chlorinator is broken?
The easiest way to be certain if the chlorinator is working is to make sure the cell is clean by checking the needle or production lights on the chlorinator box. When operating, you should also see bubbles (hypochlorite gas) inside the chamber, producing what looks like cloudy water - that's chlorine being created!
Why is there no water in my chlorinator?
The most common reason for low or no flow is that the baskets are full of debris. By checking and emptying both the skimmer basket (by the pool) and the pump basket (inside the pump) will free up the water flow, allowing the system to fully 'prime' and function at full capacity.
What does the check salt light on a Hayward Aqua Rite mean?
If the “check salt” light is lit on a Hayward Aqua Rite salt chlorinator, it could mean a number of things. First, check the display salt reading – if it’s 2,700 ppm or lower, the check salt light will come on. We always recommend an independent salt level test. If the salt level is fine, inspect the Cell and clean if necessary.
How long does it take for an inspection cell light to reset?
If the Inspect Cell Light is the only LED light flashing, then you can reset it by simply holding down the diagnostic button for 3 seconds, then release. The Inspect Cell indicator will now reset and will later come back on after another 500 hours of use.
Can you add salt to an Aqua Rite pool?
If the salt level is fine, inspect the Cell and clean if necessary. Never add salt without first having the water tested independent of the Aqua Rite reading. Salt only leaves the pool from backwashing a filter, splash out, leak or removing water from the pool.
Does salt chlorination work?
This more natural approach to chlorination eliminates the harsh chlorine odors caused by chloramines and leaves your pool feeling healthier and more luxurious. With Salt Chlorination, you receive a continuous supply of fresh, natural chlorine that is constantly circulated throughout your pool.
How to recalibrate Aqua Rite?
Before recalibrating, test the water with salt water test strips to determine the correct salt level. If the results from your test strip are not the same as the Aqua Rite, proceed to step 2. Click Here to View Salt Test Strips.
Does the Hayward Aqua Rite match the salt level?
WRITTEN BY: Inyo Pools. Occasionally the salt level on the Hayward Aqua Rite may not match the actual salt level of the pool. If the salt cell is clean but the salt reading is off, the Aqua Rite will need to be recalibrated. The following steps will provide a guide on how to recalibrate a Hayward Aqua Rite.
Step 1: Adjusting Salinity (Salt) level
Before the chlorine generator can be calibrated correctly, the salinity—or salt level in the pool water—will need to be at the correct level. For these systems, it should ideally be between 3200-3600 ppm (parts per million). This can be tested using a salt test meter or salt test strips.
Step 2: Locating the Calibration Screen
Once the salinity is adjusted to optimal level, the calibration process can begin. With the pump running and unit set to "Auto" position, press the "Diagnostics" button five times. The screen should display " - 0".
Step 3: Setting the Salinity Level
This step can get tricky and may need to be repeated. While on the calibration screen and with the pool pump still running, push the "Auto" switch down to the "Off" position for two seconds.
More About the Calibration Process
Step 3 takes some practice as it counts down very quickly. For example, if the salinity level in the pool water is 3300 ppm, when the switch is pushed from the "Off" position up to the "Auto" position, after 10 seconds, it will display a set of numbers that start going down immediately. It might start at, say, 4800 (could be higher or lower).
Questions & Answers
Question: My control board shows 3,500, but two independent tests say 2,700 and zero chlorine, and cell tests say it’s good. Which one is correct?
How to reset salt level?
To reset your average salt level, turn the unit to OFF and then back to AUTO. Wait for the relay to click (5 to 10 seconds). After the click, immediately push the diagnostic button 5 times to begin the recalibration stage.
What is the salt level of a chlorine generator?
Your salt level is between 2500-2600 parts per million (ppm). Your chlorine generator is still producing chlorine at the moment, which is a good thing. This is more of an indicator light than anything else. The salt level is 2300 ppm or less and no chlorine is generating.
