How to Reset Hayward Salt Cell
- Touch and hold the MENU/ENTER button on the cell
- Press the UP OR DOWN arrow to calibrate salt
- Touch and hold the MENU/ENTER button on the cell again
- Modify the salt display to correlate with the reading test by holding the arrows UP OR DOWN
- Touch and hold the MENU/ENTER the button to hook the modified calibration and go back to the main display.
How do I Reset my Hayward salt cell?
To reset your Hayward Salt Cell, position the switch to off and then turn back to Automatic. After that, you will need to be patient for five to ten seconds for the relay to click. During the point when the instant salt level is steady (and the negative indication is actually present), twist the switch to ‘Super Chlorinate and back to Automatic.
How do I calibrate and Reset my aquarite salt system?
Follow the steps below to calibrate and reset your AquaRite Salt System. To change the cell type, first flip the mode switch to "Auto." Press the diagnostic button 8 times to get to the cell type menu.
How to recalibrate salt level on a Hayward Aqua rite?
How To Recalibrate the Salt Level on a Hayward Aqua Rite Step 1. Before recalibrating, test the water with salt water test strips to determine the correct salt level. Step 2. With the pump running, move the main switch from "Auto" to "Off" and then back to "Auto". Wait for approximately... Step 3. ...
How do you reset the inspect cell led on a Hayward?
This blog is an in-depth look at the Aqua Rite and Aqua Rite XL diagnostics manual created by Hayward. The 500 operation hour countdown timer expires. To fix the problem, manually reset the Inspect Cell LED. Press and hold the diagnostic button for 3 to 5 seconds.
How do you recalibrate salt cell Hayward?
1:022:17Recalibrating an Aquarite Salt Chlorine Generator - YouTubeYouTubeStart of suggested clipEnd of suggested clipPosition. Second step push the diagnostic button until a T number appears on the display. The thirdMorePosition. Second step push the diagnostic button until a T number appears on the display. The third and final step move the main switch from auto to super chlorinate and back to auto repeat.
How do you reset a saltwater pool chlorinator?
To reset, move the switch to 'Off' and then back to 'Auto'. Wait for the relay to click (5 to 10 seconds). When the instant salt level is stable (and the negative sign still present), slide switch to 'Super Chlorinate' and back to 'Auto'. It takes about 30 seconds for the unit to settle back on the default reading.
How do you reset a Hayward Aqua Logic salt cell?
Press the 'Menu' until, 'Default Menu' appears on the display. This menu is where the 'Inspect Cell' message is stored. Press the (>) key, repeatedly, until 'Inspect Cell, Hold + to reset' appears on the display.
How do you troubleshoot a Hayward salt Cell?
1:184:19How To: Troubleshoot a Hayward AquaRite - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe high salt LED is illuminated. Check the salt level with a test kit if the salt level is too highMoreThe high salt LED is illuminated. Check the salt level with a test kit if the salt level is too high lower. It by draining some of the pool water via the pools wastewater.
What should my Hayward salt chlorinator be set at?
between 2700-3400 ppmThe ideal salt level is between 2700-3400 ppm (parts per million) with 3200 ppm being optimal.
How do I know if my chlorinator is clogged?
3:314:13Pool Chlorinator Clog FIX! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd what you should hear once you un do it when you turn off the pump and you actually take the lidMoreAnd what you should hear once you un do it when you turn off the pump and you actually take the lid off you should hear a suction sound so i'm gonna let you listen to that. Here.
How do you troubleshoot a Hayward chlorinator?
How to Troubleshoot a Hayward ChlorinatorFour Hayward Models.Chlorine Concentration in the Pool Is Too Low.The Lid Is Hard to Tighten or It Leaks.The Control Valve Is Clogged.The Chlorinator Has an Air Lock.
Why is my salt cell light blinking?
If the “Inspect Cell” light flashes by itself it is an early indication that the salt generator needs a manual reset. Each cell is equipped with 500 operational hours and requires a manual reset once it expires.
How often does a salt cell need to be replaced?
about five to seven yearsThe safe answer is that they usually last for about five to seven years. Salt Cells cost between $200 and $900 to replace, depending on your chlorinator model.
How do I know my salt cell is working?
1:252:22Tip 3 - How to check if your salt cell is working - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat we're doing here and we turn it on is we're looking for bubbles or a fizzing. Effect. Once weMoreWhat we're doing here and we turn it on is we're looking for bubbles or a fizzing. Effect. Once we see the bubbles. And the fizzing. We know that it's actually working.
Why is my salt water chlorinator not working?
The saltwater chlorinator needs a sufficient flow of water for effective operation. A dirty skimmer basket, clogged or dirty filter, and a clogged pump strainer, can cause insufficient water flow for the chlorinator to produce less chlorine.
What temperature does a Hayward salt cell stop working?
between 65-62 degreesWhen the pool water temperature drops between 65-62 degrees (depending on the brand), the salt cell will automatically shut down to preserve the lifespan of the cell.
How do I know if my salt chlorinator is not working?
A salt chlorinator usually lasts 3-5 years, depending on the pool filtration system and other environmental factors....Signs that indicate that your system is not working include:Low chlorine levels in the pool water.No Flow indication on the flow monitor.Corroded plates.Indicator lights signaling cell damage.
What do you do if your salt chlorinator stops working?
0:155:24Salt Chlorine Generator Troubleshooting - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first thing to do is to make sure you have enough salt in the pool water you zodiac salt waterMoreThe first thing to do is to make sure you have enough salt in the pool water you zodiac salt water chlorinator will require about 4,000 parts per million salt in the pool water.
How do I know if my saltwater chlorinator is working?
1:252:22Tip 3 - How to check if your salt cell is working - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat we're doing here and we turn it on is we're looking for bubbles or a fizzing. Effect. Once weMoreWhat we're doing here and we turn it on is we're looking for bubbles or a fizzing. Effect. Once we see the bubbles. And the fizzing. We know that it's actually working.
Why is my salt water pool not generating chlorine?
Salinity. Chlorine generators need salt to produce chlorine and can't do so if the amount of salt in the water is too low. The desired salinity level in a saltwater pool is between 2,500 and 3,500 ppm. Get a salt-testing kit from a pool supplier and check to make sure that the levels are within this range.
What does the check salt light on a Hayward Aqua Rite mean?
If the “check salt” light is lit on a Hayward Aqua Rite salt chlorinator, it could mean a number of things. First, check the display salt reading – if it’s 2,700 ppm or lower, the check salt light will come on. We always recommend an independent salt level test. If the salt level is fine, inspect the Cell and clean if necessary.
How long does it take for an inspection cell light to reset?
If the Inspect Cell Light is the only LED light flashing, then you can reset it by simply holding down the diagnostic button for 3 seconds, then release. The Inspect Cell indicator will now reset and will later come back on after another 500 hours of use.
Can you add salt to an Aqua Rite pool?
If the salt level is fine, inspect the Cell and clean if necessary. Never add salt without first having the water tested independent of the Aqua Rite reading. Salt only leaves the pool from backwashing a filter, splash out, leak or removing water from the pool.
Does salt chlorination work?
This more natural approach to chlorination eliminates the harsh chlorine odors caused by chloramines and leaves your pool feeling healthier and more luxurious. With Salt Chlorination, you receive a continuous supply of fresh, natural chlorine that is constantly circulated throughout your pool.
What is the default salt level for a cell?
Reset the average salt level on startup and whenever you replace your cell. (The factory default is 2800 ppm)
What is the salt level of a chlorine generator?
Your salt level is between 2500-2600 parts per million (ppm). Your chlorine generator is still producing chlorine at the moment, which is a good thing. This is more of an indicator light than anything else. The salt level is 2300 ppm or less and no chlorine is generating.
How to switch cell type to super chlorinate?
Switch your cell type by cycling the main switch from AUTO to SUPER CHLORINATE and then back to AUTO.
How to fix 500 hour countdown timer?
The 500 operation hour countdown timer expires. To fix the problem, manually reset the Inspect Cell LED.
Who created the Aqua Rite XL diagnostics manual?
This blog is an in-depth look at the Aqua Rite and Aqua Rite XL diagnostics manual created by Hayward.
What direction should the arrow point on a water flow switch?
Step 2: Did you properly install your switch? The arrow should point in the same direction as the water flow. If it is not, re-align your flow switch.
How to recalibrate Aqua Rite?
Before recalibrating, test the water with salt water test strips to determine the correct salt level. If the results from your test strip are not the same as the Aqua Rite, proceed to step 2. Click Here to View Salt Test Strips.
Does the Hayward Aqua Rite match the salt level?
WRITTEN BY: Inyo Pools. Occasionally the salt level on the Hayward Aqua Rite may not match the actual salt level of the pool. If the salt cell is clean but the salt reading is off, the Aqua Rite will need to be recalibrated. The following steps will provide a guide on how to recalibrate a Hayward Aqua Rite.
Can you recalibrate Hayward Aqua Rite?
The Hayward Aqua Rite should now be successfully recalibrated. If the incorrect salt reading continues to be a problem, it may be time to replace the salt cell.
