Step 1 – Resetting the ECU
- Place the key in the ignition and leave it in the off position. ...
- The screen should display "test" and a number. ...
- When "log i-off" appears again, press the reset button and you will enter the system's software.
- Scroll up until you reach "21.0 Software Reset." ...
- Turn the ignition back to position 2 for 10 seconds. ...
See more
How do you reset a MINI Cooper computer?
With the key in the "on" position (2), hold down the "trip reset" button for 3 seconds and "1. tESt" will show up on the display. Press the "trip reset" button until you reach test #19, and it will alternate between "19 L-on" and "19 L-off" a few times. Once it displays "19 L-off" again, press the "trip reset" button.
Where is the reset button on a MINI Cooper?
Locate the reset button positioned in front cabin on the emergency brake handle. Turn the ignition to position 2, press and hold the reset button until the yellow indicator on the dash lights up for a few seconds.
How do I reset my ECU?
0:141:33How to reset your ECU in less than 1 minute - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen once you've opened the hood you need to find on the fuse box the fuse that says ECU. Which isMoreThen once you've opened the hood you need to find on the fuse box the fuse that says ECU. Which is this one. And now that you found it the only thing you need to do is remove.
How do I get my MINI Cooper out of limp mode?
To reset a MINI Cooper safe mode with the key in the ignition, but in the off position, press and hold down the odometer reset button with one hand.
What is limp mode MINI Cooper?
Also known as 'limp home mode', limp mode is a security feature in cars which activates when the engine or transmission control unit picks up a fault. Once it detects a problem, limp mode will cause the less important parts of the car, such as air conditioning, to switch off, and the speed of the car will be reduced.
What would cause a MINI Cooper to not start?
The most common three reasons being that your Mini Cooper is suffering from some type of alternator problem, your battery is dead, or the starter has gone bad. Of the three main reasons for your Mini Cooper not starting, a dead battery is the most common, followed by a bad alternator and then a bad starter.
How do I manually reset my car computer?
0:432:54How to Reset Your Car's Computer, Old School Scotty Kilmer - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou should wait four or five minutes so all the electricity is drained. Then just get the negativeMoreYou should wait four or five minutes so all the electricity is drained. Then just get the negative terminal and bolt it back on.
Will disconnecting battery reset car computer?
On some older cars, disconnecting the battery will reset the system but in most new cars it does nothing, except potentially reset the clock and radio station presets.
How long does it take for a car computer to reset?
Resetting an ECU by disconnecting a car battery is a simple process that anyone can do. Please be aware that resetting an ECU usually takes anywhere from 30 minutes to an hour, so plan accordingly.
How do I know if my Mini Cooper is in limp mode?
What Are The Symptoms of Limp Mode?Check Engine Light. The check engine light is probably the first thing you will notice on your dashboard when the car is in limp mode. ... Reduced engine power. ... RPM limit lowered. ... Stuck in Gear.
How do you know if your car is in limp mode?
If you experience a loss of power and see some warning lights on your dashboard, then your car may well have entered into limp mode. It's called this because the car will limit power to protect it from possible damage, while still allowing it to hobble on to your garage or destination.
Will disconnecting battery reset limp mode?
Battery Disconnection All you have to do is waiting for about half an hour before you reconnect it. The underlying step is likely to reset the transmission memory on the whole. Once you restart the car after effective reconnecting, the limp mode would deactivate on its own.
How do I reset my 2010 Mini Cooper?
0:000:49OIL LIFE RESET ON MINI COOPER IN 49sec 2008 2009 2010 2011 2012YouTubeStart of suggested clipEnd of suggested clipShow you real quick how to reset the oil service reminder on a 2010 Mini Cooper. So go ahead andMoreShow you real quick how to reset the oil service reminder on a 2010 Mini Cooper. So go ahead and take your key put it ignition. Press the start button once let it cycle through.
How do I reset my 2011 Mini Cooper?
0:112:18How To Reset MINI Service Light (06-13) - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow I'm gonna use his thumb stock and hold it. Down. Let go press and hold again.MoreNow I'm gonna use his thumb stock and hold it. Down. Let go press and hold again.
How do I reset my 2009 Mini Cooper?
2:223:02Mini service reset - YouTubeYouTubeStart of suggested clipEnd of suggested clipButton it lasts if you want to reset release press again you'll see a clock reset itself andMoreButton it lasts if you want to reset release press again you'll see a clock reset itself and everything's reset that's it and all you have to do is just uh switch the ignition. Off start to back up.
How do I reset my 2007 Mini Cooper?
0:111:07How to reset oil change reminder on 2007 Mini Cooper - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you land on the service item that you want to reset. Press. And hold the BC button until theMoreOnce you land on the service item that you want to reset. Press. And hold the BC button until the reset option appears. Then press the BC button again to confirm the reset.
How to reset ECU?
We are going to reset the ECU by disconnecting the battery long enough for it to go into "sleep" mode, commonly called a soft reset. To do so, we need to use our 13mm socket and disconnect the negative (black) terminal from the battery. You can remove the positive terminal as well if you're so inclined, but that's completely optional. If you have a rag or something similar, we recommend wrapping the negative terminal, or using a piece of tape to tie it away from the battery or positive ground; if they make accidental contact, you could be in for a shocking experience.
Where is the battery tray on a Mini?
Pop the hood of your Mini and locate the battery/rain tray cover in the far-left corner, near the top edge of the fender, hood and windshield. We need to access the battery to reset the car's computer, so removing these covers will be our first step.
How to remove a battery from a cowl?
After those two screws are removed, slide the rubber weatherstripping off the edge of the cowl plastics and then gently pry the plastics up. These pieces are secure with small clips, so they will "pop" out of the connectors when you pull up. The battery should now be accessible.
How long to idle a car before resetting?
reconnect and then start the car , let it idle for 5 minutes and then drive around for 15 as you usually would drive .
How long does it take to disconnect battery on R53?
In my R53, you can remove the computer's info on how you drive by disconnecting the battery for 30 minutes. I used to do this before track events, so the engine was more responsive (so it would stop trying to predict what ai wanted to do, based on previous street driving).
Is a 2013 MINI a good car?
A 2013 MINI is lower than average when compared across all MINI generations but the most reliable when only compared against 2nd generation MINIs.
Step 1 – Remove The Battery Tray Cover
Step 2 – Unhook The Negative Terminal from The Battery
- We are going to reset the ECU by disconnecting the battery long enough for it to go into "sleep" mode, commonly called a soft reset. To do so, we need to use our 13mm socket and disconnect the negative (black) terminal from the battery. You can remove the positive terminal as well if you're so inclined, but that's completely optional. If you have a rag or something similar, we reco…
Step 3 – Reassembly
- Okay, you're back, and sated with your beverage of choice? Excellent. This is the home stretch, and waiting was the hardest part. All that remains is to reconnect the negative terminal, and positive if you opted to remove it, and then reassemble the cowl covers by popping the cover back into the clips, refitting the weatherstripping and tightening down the two 13mm bolts. You're don…
Related Discussions