You simply press 1-2-3-4-5-6, wait a second, and turn the handle. Now I am going to show you how to change the combination on the SecuRam electronic lock. If you remember nothing else from this video, you always want to change your combination with the door open and the bolts extended. Bolts are out, door open.
How to program securam locks?
The factory combination on the Securam locks is 1-2-3-4-5-6. And the door will open. Now in order to program this lock, there is a very simple procedure and I'm going to show you how to do it right now. Always program your lock with a new combination with the door open and the bolts in the simulated closed position.
How do I change the battery on my securam electronic lock?
Now I want to show you how to change the nine volt battery, on your SecuRam electronic lock. You simply grab the bottom of the lock, not pulling it out, but pushing it straight up, you will hear a click and you simply turn it over and the nine volt battery is right behind there.
What do you think about securam safe logic basic?
The Securam Safe Logic Basic has a number of nice features. It has a 6 digit combination. It has 2 users and a manager and a user code. It also features a lockout penalty if you put the wrong combination in 4 times.
How long will a securam lock last without power?
That non-volatile chip will store your personal private combination for upwards of 3 years without any power whatsoever. So when you come back, you just put a new battery in it and you're up and running again. The factory combination on the Securam locks is 1-2-3-4-5-6. And the door will open.
How do I reset my SecuRam safe lock?
1:303:00Reset to factory Default - SafeLogic Series - SecuRam - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou take the paperclip. And you press down into that reset button you'll feel the button go up andMoreYou take the paperclip. And you press down into that reset button you'll feel the button go up and down press it down just three times.
How do you change the code on a Liberty safe SecuRam?
To change your safe lock combination code with the SecuRam TopLit or BackLit models, you'd simply: Press the "0" key six times (you will then hear two beeps) Enter your existing six-digit code (you should then hear two beeps) Enter your new six-digit code (you will hear one beep)
How do I reset my SecuRam Prologic lock?
0:093:01ProLogic L02 Recover System SecuRam YouTubeYouTubeStart of suggested clipEnd of suggested clipRecovery. Code nine nine nine nine nine nine that is the default code it.MoreRecovery. Code nine nine nine nine nine nine that is the default code it.
How do you change the combination on a Titan SecuRam safe?
0:542:55SecuRam safe lock opening,changing combo & batteryYouTubeStart of suggested clipEnd of suggested clipOpen show you how to change the combination on the secure Ram electronic lock you simply put in sixMoreOpen show you how to change the combination on the secure Ram electronic lock you simply put in six zeros one two three four five six the existing six digit combination.
How do I change my safe code?
0:321:51Change Combination - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimple process code changing should only be performed with a safe door in the open position to beginMoreSimple process code changing should only be performed with a safe door in the open position to begin press 2 to star then enter your existing code in this case it's 1 4 7 2 5 8 followed by pound.
How do you open a Liberty Safe if you forgot the combination?
Filling Out a Combo Request Form If you need immediate access to your safe's combination, you'll need to hire a certified locksmith. However, you must contact Liberty Safe first and have the locksmith contact us, too. Failure to do so will void your safe and safe lock warranties.
Where is the reset button on a digital safe?
Press the reset button on the inner keypad of the safe. It should be a small, black button with the word "Reset" next to it. Push the button with the end of the hanger. You may hear a beeping sound or the control panel may light up when you press the reset button.
How do I bypass Securam lock?
0:421:59SecuRam - SafeLogic Series - Recover from an unknown codeYouTubeStart of suggested clipEnd of suggested clip1 1 1 1 1 1. And hold you get the second set of beeps. Now you press 1 and now you can enter a codeMore1 1 1 1 1 1. And hold you get the second set of beeps. Now you press 1 and now you can enter a code you'd like it to be let's enter 1 2 3 4 5 6 it'll ask you to repeat 1 2 3 4 5 6.
How do I connect to a Securam lock?
2:394:53Fail to Link - Pairing and Converting to Digital Mode - SecuRam - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you connect the entry pad to the lock body and hold another five seconds so one two three fourMoreAnd you connect the entry pad to the lock body and hold another five seconds so one two three four five and now you release there's no indication from the lock that is now set in digital mode.
What do you do if your safe won't open?
Jammed Bolt Work Turn your back to the safe, and kick the door, hard, a few times. Be sure that you do not kick the keypad or the handle. This will help loosen the bolt work. Next, pull the handle in the opposite direction than you normally do and enter the code.
How do you reset a 4 digit combination lock?
0:001:16Reset the 4 Digit Master Lock Code - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo now what you'll do is open it up and turn it what is that ninety degrees. And push it down andMoreSo now what you'll do is open it up and turn it what is that ninety degrees. And push it down and you'll see there's a tiny little piece of metal. There. You if you're able to push that down.
Why is my Securam lock beeping?
Low Battery Alert a) Repeated beeping (8 beeps) during an unlock operation indicates that the battery is low and needs immediate replacement. b) Manufacturer recommends the use of 9-Volt standard alkaline batteries (Duracell or Energizer brands are recommend) replaced annually.
How do I open a ProLogic safe?
Step1: Press the Menu/OK button Step 2: At “My Menu”, press the Menu/OK button Page 10 ProLogic B22 Operation Instructions 10 Step 3: The display will prompt you to enter a code. Enter a valid Super or Manager Code, and press Menu/OK. Step 4: After entering a valid Super or Manager code, the screen will show “Users”.
Why does my Securam lock keep beeping?
Low Battery Alert a) Repeated beeping (8 beeps) during an unlock operation indicates that the battery is low and needs immediate replacement. b) Manufacturer recommends the use of 9-Volt standard alkaline batteries (Duracell or Energizer brands are recommend) replaced annually.
How do I reset my La Gard electronic lock?
How to Reset LaGard Electronic LocksOpen the door of the safe or room that uses the La Gard lock by entering the lock's current combination. ... Press the "0" key six times, then enter the current six-digit combination one time.Enter the newly chosen six-digit combination two times.More items...
How do I reset my NL lock?
0:071:08Cannon Safe - FAQs - How do I program my safe code? (NL Keypad)YouTubeStart of suggested clipEnd of suggested clipFive enter your new six digit code until the lock double beeps. Six enter your new six digit code aMoreFive enter your new six digit code until the lock double beeps. Six enter your new six digit code a second time until the lock double beeps again and lock light turns.