how do i reset my wemo dimmer

• Step 1: Launch the Wemo app.
• Step 2: Tap Edit.
• Step 3: Find the Wemo device you want to factory restore and tap on the arrow to open the Edit Wemo screen.
• Step 4: Tap Reset Options.
• Step 5: Tap Factory Restore. ...
• Step 6: You will then be asked for a confirmation, tap Yes.

Full Answer

How to reset and initialize Wemo devices?

unplug the wemo device. press the reset button on the top of the wemo device. keep the reset button pressed while replugging the device to the mains power supply. hold the reset button for 5-6 seconds, and release it when the led blinks orange. be patient.

How do you reset a Wemo link?

switch on the wemo light bulbs. unplug the wemo link device. press the reset button on the bottom of the wemo link device. keep the reset button pressed while replugging the device to the mains power supply.

How to replace a dimmer switch with a single switch?

• Turn off the power at the circuit breaker box. ...
• Use a screwdriver to remove your existing wall plate and the screws mounting the switch to the wall box.
• Gently pull the switch away from the wall. ...

More items...

How to set up the Belkin Wemo Switch?

How to Install and Set Up the Belkin WeMo Light Switch

• Step One: Turn Off the Power. This is one of the most important steps and it should be done before anything else. ...
• Step Two: Remove the Existing Light Switch. ...
• Step Three: Prepare Your Wires for the WeMo Switch. ...
• Step Four: Install the WeMo Light Switch. ...
• Step Five: Connect It to Your Wi-Fi Network. ...

How do I get my Wemo back online?

0:001:09How to Reset a Wemo Mini - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt. So first you want to plug it into the wall. And hold it down for 20 seconds until the lightMoreIt. So first you want to plug it into the wall. And hold it down for 20 seconds until the light starts blinking. White.

Where is the reset button on a wemo light switch?

0:082:29How To Reset Wemo Light Switch - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow there is a little tab right here you can't really even see that it's visible. But you're goingMoreNow there is a little tab right here you can't really even see that it's visible. But you're going to press down on that for 10 seconds to reset the wemo light switch.

Why is my Wemo switch not detected?

Wemo device not detected or unreachable Make sure that the Wemo device isn't blinking orange (see the wifi light status indicator section). If so, try to restart the app. If this doesn't work, try to unplug and plug your Wemo device again. Your wemo device will try to reconnect to your home network automatically.

Why is my Wemo not connecting?

Here's what to do if your Wemo Smart Plug won't connect to Wi-Fi: Unplug the device from the wall socket and plug it back in. Next, restart your router, then return to your Wemo app and try connecting it again. This should fix the Wi-Fi connection issue with your Wemo Smart Plug.

How do you reset a dimmer switch?

0:002:21How To Reset Lutron Caseta Dimmer - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd we're just gonna reset it by pressing this top button three times and then you hold on the thirdMoreAnd we're just gonna reset it by pressing this top button three times and then you hold on the third. Press the lights are gonna light up here after you hold it down for 10 seconds.

How do I reconnect my wemo light switch to Wi-Fi?

Press and hold the Restart and the Reset buttons together for five (5) clock seconds, then release. The WeMo Light Switch Wi-Fi icon will blink to green then amber in color, indicating a successful reset. Step 2: Set up and sync your WeMo Light Switch with the WeMo App.

How do you hook up a wemo dimmer switch?

Connect the neutral and ground wires Use a wire nut to connect the white neutral wire on the Wemo Dimmer to the neutral wires (usually white) in the wall. Use a wire nut to connect the green ground wire on the Wemo Dimmer to the ground wires (usually green or bare copper) in the wall.

How do I reset my Smart Switch?

0:030:23Learn how to Reset Wi–Fi Smart In-Wall Light Switch - YouTubeYouTubeStart of suggested clipEnd of suggested clipLet's reset your connected wall switch press. And hold the reset button 10 seconds until you hearMoreLet's reset your connected wall switch press. And hold the reset button 10 seconds until you hear the click.

Why is my Wemo switch blinking orange?

Cannot connect to Wi-Fi: If the Wemo is blinking orange, it is having difficulty connecting to your Wi-Fi.

How do I make my Wemo device active?

0:001:58How to Troubleshoot the Wemo Mini Smart Plug - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow go to your phone. And turn off mobile data and sync. Then go into airplane mode can then turn onMoreNow go to your phone. And turn off mobile data and sync. Then go into airplane mode can then turn on only Wi-Fi connect to the whe most open Wi-Fi.

Why is my Wemo blinking orange and white?

Solid White - When the Wemo Mini is configured, working properly, turned on and has power, the light will be solid white. Blinking Orange - This signifies that the Wemo has your Wi-Fi name and password stored, yet is unable to connect to your Wi-Fi.

How do I connect my wemo smart plug to Wi-Fi?

0:504:36How to Setup a Wemo Mini Wifi Plug - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd there'll be an option to add a Wemo at the bottom once you get to this point there's no need toMoreAnd there'll be an option to add a Wemo at the bottom once you get to this point there's no need to go further. So exit out take your Wemo plug. And plug it into the wall. Super.

How do you reset a smart light switch?

0:041:31How To Reset A Smart Switch on Your Netatmo Network - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust press and hold the easy setup button for 10 seconds. The device's led will blink red the ledMoreJust press and hold the easy setup button for 10 seconds. The device's led will blink red the led light will turn off once the reset is complete to reset a gateway.

How do I reset my Wemo 3 way switch?

Press and hold the LED bar on your Wemo 3-Way Light Switch and release until the light turns blue to reset the device. NOTE: The LED bar is the same as the Restart/Reset WiFi/Restore button.

How do I reconnect my wemo plug?

Step 1: With the Wemo Mini plugged in, press and hold the power button. Step 2: Continue to hold the power button down until the Status Light begins to rapidly flash white. Step 3: Release the power button to WiFi reset the Wemo Mini. The Wemo Mini will erase its stored WiFi settings and return to setup mode.

Why is my wemo light switch blinking orange?

Cannot connect to Wi-Fi: If the Wemo is blinking orange, it is having difficulty connecting to your Wi-Fi.

How long is Belkin warranty?

Belkin warrants that any media (such as a CD or USB stick) on which the Software is provided will be free from defects in materials and workmanship under normal use for 90 days from the date of its original purchase (the “Warranty Period”). If you make an eligible software media claim under this warranty during the Warranty Period (the “Limited Warranty”), Belkin will honor this warranty by replacing the Software media. To make a claim under this Limited Warranty, return the defective media along with the sales receipt directly to Belkin at the following address: Belkin International, Inc., 12045 E. Waterfront Drive, Playa Vista, CA 90094. This Limited Warranty is void if failure of the media has resulted from accident, abuse, or misapplication. Any replacement media will be warranted for the remainder of the original Warranty Period or thirty (30) days, whichever is longer. In relation to consumers who are entitled to the benefit of the CGA, the media on which Software is provided comes with guarantees that cannot be excluded under New Zealand law, and this Limited Warranty is in addition to any statutory rights such consumers may have under New Zealand law. This Limited Warranty does not apply in Australia. Consumers in Australia have statutory rights in relation to the Software and media on which the Software is provided under the Australian Consumer Law.

What is a Belkin license agreement?

This End-User License Agreement (this “Agreement”) is a legal document that contains the terms and conditions under which limited use of certain Software (as defined below) that operates with the Product is licensed to you.

How long does it take for a Wemo light switch to reset?

The Wemo Light Switch will take about 90 seconds to perform the restore. When ready, the Wi-Fi Indicator light will begin to alternate between green and orange to show it is ready to be set up. For instructions on setting up your Wemo Light Switch, click here. Related Article:

How to restart a Wemo light switch?

How to restart your Wemo Light Switch. To restart the Wemo Light Switch, press the Restart button for 1 second and then release. The Wi-Fi indicator light will begin to blink green to show it is restarting. If the Wemo Light Switch is not responding to the Restart button, turn OFF the power of the Wemo Light Switch by turning ...

What does "special, indirect, consequential, punitive, consequential, or incidental damages" mean?

IF YOU LIVE IN THE EUROPEAN UNION, REFERENCES TO "SPECIAL, INDIRECT, CONSEQUENTIAL, PUNITIVE OR INCIDENTAL DAMAGES" SHALL MEAN ANY LOSSES WHICH (I) WERE NOT REASONABLY FORESEEABLE BY BOTH PARTIES; (II) WERE KNOWN TO YOU BUT NOT TO US; AND/OR (III) WERE REASONABLY FORESEEABLE BY BOTH PARTIES BUT COULD HAVE BEEN PREVENTED BY YOU SUCH AS, FOR EXAMPLE (BUT WITHOUT LIMITATION), LOSSES CAUSED BY VIRUSES, MALWARE OR OTHER MALICIOUS PROGRAMS, OR LOSS OF OR DAMAGE TO YOUR DATA.

What to do if playback doesn't begin?

If playback doesn't begin shortly, try restarting your device.

Is Belkin a CGA?

CERTAIN LEGISLATION, INCLUDING THE AUSTRALIAN CONSUMER LAW AND THE CONSUMER GUARANTEES ACT 1993 (NEW ZEALAND) (“CGA”) MAY IMPLY WARRANTIES OR CONDITIONS, OR IMPOSE GUARANTEES OR OBLIGATIONS ON BELKIN, WHICH OPERATE TO PROTECT CERTAIN AUSTRALIAN OR NEW ZEALAND PURCHASERS OF GOODS AND SERVICES IN VARIOUS CIRCUMSTANCES ("AU/NZ APPLICABLE LAWS"). NOTHING IN THIS AGREEMENT EXCLUDES, RESTRICTS OR MODIFIES ANY CONDITION, WARRANTY, GUARANTEE, RIGHT OR REMEDY IMPLIED OR IMPOSED BY ANY AU/NZ APPLICABLE LAWS WHICH CANNOT LAWFULLY BE EXCLUDED, RESTRICTED OR MODIFIED. If any condition, warranty or guarantee is implied into this Agreement or imposed on Belkin under AU/NZ Applicable Laws and cannot be excluded, but Belkin has a choice of a remedy, then Belkin’s liability for breach of the condition, warranty or guarantee is limited to one or more of the following, at Belkin’s option: (a) in the case of goods, the replacement of the goods or the supply of equivalent goods, the repair of the goods or refunding the payment for the goods if it would be unreasonable to expect the products to be repaired; or (b) in the case of services, the supplying of the services again, or the payment of the cost of having the services supplied again. In addition to these remedies a "consumer" (within the meaning of the CGA) may claim for any reasonably foreseeable loss (other than loss or damage through reduction of value of the goods) that results from the initial problem.

What is the orange dimmer?

Orange – Your Wemo Dimmer is on randomize lighting when set to Away Mode. The light will turn ON/OFF randomly so it appears that you’re home when you’re not.

How to check firmware version of Wemo Dimmer?

To check the firmware version of your Wemo Dimmer, launch your Wemo App. Go to More > Settings & About > Hardware Info and select your Wemo Dimmer from the list and look for Firmware Version. For instructions on how to update your Wemo device’s firmware, click here.

What is pulsing on a Wemo dimmer?

Pulsing – The Wemo Dimmer is booting up (after powering up the circuit breaker). Firmware is upgrading.

How to reboot Wemo dimmer?

Pressing and holding the LED bar down for 2 seconds until it illuminates white will reboot the Wemo Dimmer.

What is a Wemo smart dimmer?

The Wemo WiFi Smart Dimmer, F7C059 is an easy-to-use technology that allows you to control your dimmable lighting from anywhere and at any time.

What is a Belkin license agreement?

This End-User License Agreement (this “Agreement”) is a legal document that contains the terms and conditions under which limited use of certain Software (as defined below) that operates with the Product is licensed to you.

Can a Wemo dimmer be used as a general purpose dimmer?

No. The Wemo Dimmer does not support a general-purpose dimmer to control a general purpose electrical receptacle of any kind. The dimmer needs to connect to the light source directly, not via an electrical outlet.

How to fix Wemo light switch?

If the Wemo Light Switch isn’t responding after pressing the Restart button, turn the circuit breaker OFF and then turn it back ON. Now try to restart your device again—it should work this time and possibly fix the problem.

How long does it take to reset a Wemo light switch?

Note: The Wemo Light Switch will take about 90 seconds to complete the reset. When the reset is complete, the Wi-Fi indicator light will start alternating between green and orange lights, showing the device is ready to be set up.

What to do if Wemo is out of date?

However, if the problem isn’t resolved after restarting or resetting the device, check to see if your current version of the Wemo app is out of date. If there’s a new version, update it and then try to set it up again.

How to connect Wemo to Wi-Fi?

Select your Wi-Fi name and then enter your password. Wait for a few seconds for the Wemo App to connect to your Wi-Fi. If it takes too long to connect to Wi-Fi, refresh your phone and try to connect again.

What does the orange light on a Wemo light switch mean?

And that’s all about resetting your Wemo Light Switch. The Wemo Light Switch icon will blink a quick orange light, indicating the process was successful. If not, repeat the steps and ensure you’re doing it correctly.

What band does a Wemo light switch work on?

Turn on your phone’s Wi-Fi and ensure it’s connected to your home Wi-Fi. Note that Wemo Light Switch can only connect to 2.4 GHz Wi-Fi band.

What is the phone number for Wemo light switch?

If the Wemo app is still not detecting your Wemo Light Switch, call Wemo/Belkin Technical Support at 1-800-223-5546 for further help.