iAquaLink Setup
- Confirm that the internet connection switch on the iAquaLink is set to the wired position
- Connect the ethernet cable into the ethernet port on the iAquaLink
- Within 2 minutes, the yellow LED should stop blinking on the iAquaLink. When the green LED illuminates, the iAquaLink is connected.
How to automatically connect to WiFi?
To set the Wi-Fi adapter to reconnect automatically on Windows 10, use these steps:
- Click the network icon in the system tray.
- Click the Wi-Fi button to turn off wireless connectivity. Source: Windows Central
- Use the drop-down menu and select when to re-connect automatically: Manually. In one hour. In four hours. In one day. Source: Windows Central
How do I connect a device to my WiFi?
- Tap the Settings icon.
- Tap Wireless & networks or Wi-Fi.
- If turned off, tap Wi-Fi to turn it on. Note: Settings and menu options may vary between manufacturers and Android versions. Refer to your device owner’s manual for specific steps.
How to connect a relay to WiFi?
Steps
- Start by opening the Relay app
- Under the Direct Chat list, tap on the Relay device
- Tap on the Settings icon at the top of the screen
- Tap on WiFi
- Tap on the name of the WiFi network you wish to connect to
- Type in the password for the WiFi network
- Tap Connect
How do I connect to a printer using WiFi?
Stage 2: Add a Printer to the Computer
- Right-click Start button, and choose Settings. Then select Devices from Windows Settings.
- Click Printers & scanners.
- Click Add a printer or scanner . Then Windows 10 will look for the printer during the process, and the found printer will be displayed in the result.
- Select the Wi-Fi printer and Choose Add device. ...
How do I connect my iAquaLink to WiFi?
After clearing the WiFi settings and with the Wired/WiFi switch set to WiFi, use a smartphone or WiFi enabled device to go to WiFi settings. Connect to the network labeled iAquaLink. iAquaLink will display the networks it detects, as well as signal strength. Select the network iAquaLink should use.
How do I reset my iAquaLink WiFi?
0:182:54Get iAqualink back online - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what I'll actually do probably is just reset my Wi-Fi. Turn it off turn it on and then it shouldMoreSo what I'll actually do probably is just reset my Wi-Fi. Turn it off turn it on and then it should actually.
Why is my AquaLink not connecting?
If the process fails, the iAquaLink device will need to have its memory cleared by physically toggling the WiFi-Wired switch to Wired then back to WiFi. This will restart setup mode so you may attempt to connect it to your eero network again.
How do I set up my AquaLink?
0:061:40How to Setup an I-Aqualink Account - YouTubeYouTubeStart of suggested clipEnd of suggested clipPage complete the appropriate fields to create an account once your account is created login withMorePage complete the appropriate fields to create an account once your account is created login with your email address and password. Then click add location.
How do I reset my Jandy AquaLink?
How do I Reset a Jandy AquaLink System?Press the "Menu" button.Scroll to and highlight "System Setup" using the arrow keys. Press "Enter."Scroll to highlight "Clear Memory," then press "Enter." You have now reset your AquaLink system.
How do I use iAquaLink app?
0:004:00iAqualink Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipLink app on your phone and then you click on web view on the top right it will bring you to thisMoreLink app on your phone and then you click on web view on the top right it will bring you to this very same screen if you click on the status.
Can iAqualink connect to 5g?
Which Wireless standards is the iAqualink 3.0 compatible with? The IQ30 device supports 802.11 B,G, N at 2.4Ghz. It does not support 802.11 AC (Wi-Fi 5) or 802.11 AX (Wi-Fi 6).
How do I program my Jandy Aqualink RS?
Basic Programming: To set a particular piece of equipment to turn on and off at a predetermined time, press the MENU button, press the forward arrow button to scroll to the PROGRAM menu, press ENTER, and then press the button for the equipment that you want to program.
How do I change the color of my iAqualink light?
0:021:41Prestige University: iAquaLink App - Pool-Spa Lighting - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow our pool light is on and it's on our selected. Color alpine white in order to change the colorMoreNow our pool light is on and it's on our selected. Color alpine white in order to change the color we simply select the pool light again.
Does Jandy pool have an app?
Using our free app for your smartphone or web-connected device, you can control all the elements of your pool or pool/spa system, even when you're on the go. iAquaLink can be used on more mobile device platforms than any other pool control system. Free apps for Apple® and Android™ smartphones and tablets.
How do I change the color of my iAquaLink light?
0:021:41Prestige University: iAquaLink App - Pool-Spa Lighting - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow our pool light is on and it's on our selected. Color alpine white in order to change the colorMoreNow our pool light is on and it's on our selected. Color alpine white in order to change the color we simply select the pool light again.
What is eero router?
Unlike the familiar router-to-range extender network configuration, eero is a WiFi system that uses multiple access points to provide your home with fast, reliable coverage all on a single network. Range extenders can expand the reach of your existing wireless network.
What is iAquaLink?
iAquaLink is a remote pool control system that allows you to control temperature, pumps, filters, lights etc for your pool and spa systems.
What happens if iAquaLink fails?
If the process fails, the iAquaLink device will need to have its memory cleared by physically toggling the WiFi-Wired switch to Wired then back to WiFi. This will restart setup mode so you may attempt to connect it to your eero network again.
How long does it take for the yellow LED to stop blinking on an iAquaLink?
Within 2 minutes, the yellow LED should stop blinking on the iAquaLink. When the green LED illuminates, the iAquaLink is connected. WiFi Setup (iAquaLink 2.0 and greater): WiFi setup requires connecting via hotspot on your cell phone.
What does it mean when the iAquaLink LED turns green?
If the iAquaLink LED turns green, it’s successfully connected to the WiFi. After clearing the WiFi settings, by physically toggling the WiFi-Wired switch to Wired then back to Wi-Fi, use a smartphone or WiFi enabled device to go to WiFi settings and connect to the network labeled "iAquaLink".
Does iAquaLink detect network strength?
iAquaLink will display the networks it detects, as well as signal strength. Select the network iAquaLink should use. If prompted for a password, enter the password for the home network (case sensitive). iAquaLink will disconnect from the smartphone at this point.
How to connect iAquaLink J box?
Remove the two (2) screws from the cover of the iAquaLink J-box. Remove the gasket and cover. Locate the WiFi/WIRED switch and ensure it is in the WIRED position. Using standard Ethernet cable, connect one end of the cable into the connector on the device board. Connect the other end to the home network’s router. To allow the cable to exit the device, grasp the break-away piece and move it back and forth until it snaps off. Wrap the cable as shown inside the device and use the break-away as an exit hole. Replace the gasket cover, and two screws (see Quick Start Guide or Installation Manual).
What is iAqualink app?
What is iAqualink? iAquaLink is a system: a device, a web service, and a set of mobile and web apps to allow pool owners easy and convenient control of their pool or inground pool/spa system, from their smart phone, tablet, computer, or web-connected device, any time, virtually anywhere.
How to connect AquaLink power center?
Ensure all power to the AquaLink power center is off. With the dead front panel removed, feed the red 4-pin connector through the bottom access hole into the low-voltage raceway. Guide the connector and wire through to the rear of the power center board. Pull the connector between the PC board & the metal brace, and connect it to the red 4-pin socket as shown. Up to two devices can be connected to one 4-pin socket (two wires per hole). If more capacity is needed, a 6584 multiplex board can be installed. See “helpful hints” section or see instructions included with the 6584 for more information. Ensure that all wires are properly attached to the Red 4-pin connector. The colors are 4-Green, 3-Yellow, 2-Black, 1-Red looking from left to right. Ensuring wires are not pinched, tilt up the metal board plate into position and replace the two screws. Replace the dead-front panel and reattach the screws. Turn power back on to the power center.
What languages does iAquaLink support?
iAquaLink currently supports English, French, Spanish, German, Italian, Portuguese, Dutch, Swedish, Russian and Afrikaneer with more to come in the future. In addition, the iAquaLink apps will detect the language used on the smart phone or tablet, and use that language as the default.
How does a pool device work?
The device can be mounted indoors or out , depending on specific site requirements as determined by a pool professional. Once installed, the device connects to the internet, via the pool-owners router. The device can be connected to the router using a WiFi (wireless) or Ethernet (wired) connection.
What is the best pool controller for Android?
Swimming pool automation from your mobile phone, tablet, or web-connected device. Zodiac iAquaLink is the most intuitive and user-friendly mobile pool controller for iOS and Android.
How to contact Fluidra iQ900?
United States Spanish. iAquaLink iQ900 Support. If you need assistance, please submit an online request, call (800) 822-7933, or e-mail us at [email protected]. iAquaLink SSID/Set-up. Welcome, and thank you for purchasing iAquaLink!
How to add iAquaLink to my account?
To add the iAquaLink device to an account, you must be connected to the web through the same router the iAquaLink device is connected to. To download the App, go to iAquaLink.com and select . Mobile Apps- this may appear as a drop-down menu on some devices. It will display links for the appropriate apps for the device.
How to connect iAquaLink to RS485?
Ensure all power to AquaLink is OFF, then remove the dead panel. Pass the iAquaLink cable through the low voltage raceway of the AquaLink. Reinstall the dead panel (and/or close doors if applicable) to ensure high- voltage areas are secured. Connect iAquaLink to the RS485 4-wire connector on the power center board of the AquaLink. Restore power to the AquaLink system.
How to clear memory on iAquaLink?
The iAquaLink will start WiFi setup mode when the WiFi-Wired switch is set to WiFi and its memory has been cleared. To clear the memory, toggle the switch and leave it in the WiFi position.
How to check signal strength of iaqualink?
An easy way to evaluate the signal strength between the iAquaLink and the home router, is by using the Hotspot method. This method allows the installer to scan networks, and shows a signal strength indicator. This can be a helpful tool to evaluate the final mounting location of the iAquaLink device. See Section 3A of this manual.
Can iAquaLink disconnect from phone?
If prompted for a password, enter the password for the home network (caps sensitive). iAquaLink will disconnect from the smartphone at this point. See Helpful Hints #6 for more info
Why choose iAquaLink
You don’t have to visit the pool pad to turn valves or set up pump speeds. Do it all from the app!
Get the iAquaLink app
Download or update the iAquaLink app free from the App Store or Google Play.
How to connect iAquaLink J box to internet?
Remove the gasket and cover. Locate the WiFi/Wired switch and ensure it is in the WiFi position. Using a USB cable, connect the iAquaLink J-Box to an internet enabled computer. Download the WiFi Set-up tool below and follow the directions. iAquaLink WiFi Setup Tool 1.2.1 for Mac OS X 10.6+
How secure is iAquaLink?
From the home network, you can remove your pool from other user account's. Your iAquaLink device is as secure as the network it is connected to. Reasonable steps can be taken to secure your home network - such as changing the SSID (the network name), not broadcasting the SSID, or changing the network password (sometimes called a "key"). Because all routers are slightly different, detailed instructions on how to do this may be found in the owners manual for your router, or by contacting the router manufacturer's customer or technical support department.
What is iAquaLink?
iAquaLink is a system: a device, a web service, and a set of mobile and web apps to allow pool owners easy and convenient control of their pool or inground pool/spa system, from their smart phone, tablet, computer, or web-connected device, any time, virtually anywhere.
What languages does iAquaLink support?
iAquaLink currently supports English, French, Spanish, German, Italian, Portuguese, Dutch, Swedish, Russian and Afrikaneer with more to come in the future. In addition, the iAquaLink apps will detect the language used on the smart phone or tablet, and use that language as the default.
How does a pool device work?
The device can be mounted indoors or out , depending on specific site requirements as determined by a pool professional. Once installed, the device connects to the internet, via the pool-owners router. The device can be connected to the router using a WiFi (wireless) or Ethernet (wired) connection.
How to change pool location on pool app?
To change the pool being controlled, just touch the settings tab and select the location you wish to control. It doesn't get any easier.
How to connect Ethernet cable to router?
Using standard Ethernet cable, connect one end of the cable into the connector on the device board. Connect the other end to the home network’s router. To allow the cable to exit the device, grasp the break-away piece and move it back and forth until it snaps off.
How to connect iAquaLink antenna to computer?
Remove the gasket and cover. 2. Locate the WiFi/Wired switch and ensure it is in the WiFi position. 3. Using a USB cable, connect the iAquaLink antenna to an Internet enabled computer. 4.
What languages does iAquaLink support?
iAquaLink currently supports English, French, Spanish, German, Italian, Portuguese, Dutch and Swedish with more to come in the future. In addition, the iAquaLink apps will detect the language used on the smart phone or tablet, and use that language as the default.
How to connect Ethernet cable to router?
Using standard Ethernet cable, connect one end of the cable into the connector on the device board. Connect the other end to the home network’s router. To allow the cable to exit the device, grasp the break-away piece and move it back and forth until it snaps off.
What is iAquaLink TRi?
What is iAquaLink. iAquaLink is a system: a connecting device, a power center (AquaLink TRi), a web service, and a set of mobile and web apps to allow pool owners easy and convenient control of their pool system, from their smartphone, tablet, computer, or web-connected device, any time, virtually anywhere.
Can you control the pool lights with iAquaLink?
It's like having control of the pool in your smartphone. With iAquaLink, you can monitor and control pumps, pool lights, temperature settings, heating systems, water features such as waterfalls, water jets, spill-overs, and more. Outside the pool, landscape lights can also be controlled.
Does iAquaLink require internet?
iAquaLink does require an Internet connection, as does the interface being used to control it (smartphone, tablet, computer, etc.).
Can you remove a pool from iAquaLink?
While connected to the home network (the same network the iAquaLink is connected to), you can remove your pool from other user accounts. Your iAquaLink device is as secure as the network it is connected to.
What firmware is used with AquaLink?
For use with AquaLink®RS for Systems with Rev R Firmware or later
Is there a guarantee that interference will not occur in a particular installation?
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
