See more
How do I start my Rainbird sprinkler system in the spring?
0:016:56How to Startup Lawn Irrigation System (Rain Bird) & Repair Sprinkler PipeYouTubeStart of suggested clipEnd of suggested clipSystem this is the shutoff valve if it's perpendicular to the pipe. That means that it's off. SoMoreSystem this is the shutoff valve if it's perpendicular to the pipe. That means that it's off. So turn it on you simply turn this so starting out you want to do this slow.
How do I manually turn on my sprinkler system?
0:295:19How to Turn on Sprinklers Manually + Business Talk - YouTubeYouTubeStart of suggested clipEnd of suggested clipOpen this up. And these are all manual valves down inside here you see this little tiny square.MoreOpen this up. And these are all manual valves down inside here you see this little tiny square. Spigot if you turn that counterclockwise.
Why is my Rain Bird sprinkler system not turning on?
Troubleshoot Rain Bird Valves After checking for issues with the controller and water supply, check that the valves are working. See if they work manually. If they do, select "manual start" from your controller and see if the solenoid clicks when activated. If it doesn't, it may be burned out and will need replacement.
How do you manually turn on a Rainbird sprinkler valve?
0:171:00Manual operation of Rain Bird valves - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn the solenoid in the on or counterclockwise. Direction about a quarter turn then wait a fewMoreTurn the solenoid in the on or counterclockwise. Direction about a quarter turn then wait a few seconds until you hear water rushing through the valve.
How do I turn my sprinkler system back on?
Slowly open the main shutoff valve to let water into the sprinkler system. For a ball valve, turn the lever handle one-quarter turn until the handle is parallel to the pipe; this is the fully open position. For an in-ground shutoff valve, use a sprinkler valve key to turn the valve counterclockwise until it stops.
How do I start my sprinkler system after winter?
Steps to turn on sprinkler system after winteringFind system's main shut-off valve. ... Find the vacuum breaker. ... Close the vacuum breaker test valves. ... Open the vacuum breaker's shut-off valves. ... Reinstall main valve bleeder cap (as needed). ... Slowly open the main valve. ... Test the system. ... Recheck the vacuum breaker and valves.More items...•
How come my sprinklers won't turn on?
When the sprinkler zones do not turn on at all, it is generally a problem with the electrical signals running from the controller to the valve solenoids. More rarely, it is caused by a faulty valve that needs to be rebuilt or replaced.
Why is there no water coming out of my sprinkler head?
Clogged sprinkler heads: You may have a clogged sprinkler head if the head doesn't rise and there is no water. Dirt, sand and other debris build up in the sprinkler head filters. To clean a filter: Turn off your water, lift the pop up riser, remove the nozzle and the filter, clean the filter and return to the nozzle.
Why is my sprinkler system not getting water?
Your Sprinkler System Is Not Getting Water Your rain sensor might be faulty. A wire might have been cut. The timer may be broken. It might not be your sprinkler system at all — your municipality may have turned the water off for repairs or due to reclaimed water being turned off during non- watering days.
How do I know if my sprinkler valves are open?
Turning it to the left lifts an internal gate that releases water incrementally as it turns. The gate lifts entirely when the handle is turned fully counterclockwise. If the handle will turn no farther counterclockwise, the valve is open.
Where is my sprinkler shut off valve?
STEP 1: Shut off the water to your sprinkler system. The shutoff valve is often located in the basement, a utility room or closet. Most shutoff valves are ball valves that have a handle. If the handle is running with the pipe, the water is turned on to the system.
How does a Rain Bird irrigation valve work?
0:151:58Rain Bird Inline Sprinkler Valves: Basic Operation - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe valve opens allowing water to pass through to the sprinklers. The number of valves in yourMoreThe valve opens allowing water to pass through to the sprinklers. The number of valves in your system depends on the size of your yard.
Can you manually open a solenoid valve?
Solenoid Manual Override is a method of opening a normally closed valve (power to open) without having power. This is a mechanical device that permits a person to operate the valve by either hand or screwdriver. This is useful in case of a power failure or to assist in machine or in system set-up or in test.
Can I turn on my sprinkler system myself?
By turning the water on too fast, it can cause problems, and this can damage the pipes or sprinkler heads. Whichever valve you are turning on, it is always safe to manually turn on sprinklers and make sure to open it slowly, give it time to pressurize before opening it all the way.
How do I know if my sprinkler valves are open?
Turning it to the left lifts an internal gate that releases water incrementally as it turns. The gate lifts entirely when the handle is turned fully counterclockwise. If the handle will turn no farther counterclockwise, the valve is open.
What are knobs for on sprinkler system?
" " Here is a typical oscillating sprinkler that you might buy at any discount or home improvement store for a few dollars: You attach the hose to a connector on the right-hand side (not shown). There is often a knob that lets you adjust the spray pattern (full, center, left or right):