Knowledge Builders

how do i start my smeg dishwasher

by Penelope Bauch DVM Published 3 years ago Updated 2 years ago
image

How to Reset a Smeg Dishwasher.

  • Step 1. Open the dishwasher door and quickly close it. Make sure that the door latches properly; you should hear a soft "click" as the latch engages.
  • Step 2.
  • Step 3.

To start the dishwasher, press the START/PAUSE button (6) for a few seconds, until the light of the selected program starts to flash (confirmation beep). The light will flash as long as the program is in progress, to indicate that it is being performed.

Full Answer

How do I start the wash cycle on my Smeg dishwasher?

Close the dishwasher door, press a wash cycle button on the dishwasher's control panel and then the "Start/Pause" button. The Smeg dishwasher will start after a few seconds. Verify that your dishwasher is switched on and set up to start a wash cycle.

Why won't my Smeg dishwasher start?

If your Smeg dishwasher will not start, it could be due to problems with the power supply, the water supply or the wash cycle. You can get your Smeg dishwasher working again by following some brand-specific as well as general troubleshooting tips. This task will take about 15 minutes.

Who makes Smeg dishwashers?

Founded by Vittorio Bertazzoni in 1948 in Guastalla, Italy, Smeg is an Italian appliance manufacturer that is known for its stylish 1950s-type retro and contemporary appliance designs. Smeg offers a line of residential dishwashers with electronic control panels.

What size plates can a Smeg dishwasher take?

The top basket of SMEG dishwashers (or middle basket, if there is an upper cutlery basket, as well) can take plates with a diameter of 6" - 7.3", depending on how it is positioned. What adjustments can I make to the middle or second basket?

image

Why is my Smeg dishwasher not starting?

The Basics. A Smeg dishwasher not starting could simply be a problem with the power supply – the appliance won't start if water is unable to be drawn from the mains water supply. Shut-off valves need to be open. And then the dishwasher should verify the setup and start of a wash cycle.

How do you use a Smeg dishwasher for the first time?

0:021:45Using the Smeg Dishwasher - by Welcome Ready Airbnb Property ...YouTubeStart of suggested clipEnd of suggested clipThe button power buttons on the very left hand side press. And hold that for around one second andMoreThe button power buttons on the very left hand side press. And hold that for around one second and all the lights turn on and it's activated.

How do you turn on a dishwasher step by step?

How to use a dishwasherLoad the top and bottom racks of the dishwasher.Load the dishwasher detergent.Select a wash cycle.Start the dishwasher.

How do you start a Smeg?

1:5011:20Smeg Speed Oven Instructions/ Tutorial SU45MCX1, SCU45MCS1YouTubeStart of suggested clipEnd of suggested clipYou may then at the time just as you've done before when the oven and grill are used for the firstMoreYou may then at the time just as you've done before when the oven and grill are used for the first time they should be heated up to the maximum temperature for long enough to burn off any oily

How do you start an integrated dishwasher?

1:503:21Smeg DI613AE fully integrated Dishwasher | AO.COM REVIEWYouTubeStart of suggested clipEnd of suggested clipSo obviously you put your powder capsule. In laughs so once you've chosen using this button it'sMoreSo obviously you put your powder capsule. In laughs so once you've chosen using this button it's really really easy we'll go with eco. And then you just shut the door and then the program will. Start.

How do I reset my Smeg dishwasher?

Reset your Smeg dishwasher to have it working again as soon as possible.Open the dishwasher door and quickly close it. ... Locate the "On/Off" button on the left side of the dishwasher control panel. ... Select and run a dishwashing cycle to ensure that the dishwasher control board has been reset successfully.

Why is my dishwasher not starting?

If the dishwasher won't do anything at all, the problem could be the power supply. Check the circuit breaker. If it has tripped, flip the switch to the “off” position and then turn it back on. If the circuit has not tripped, check to ensure that the appliance is properly plugged into its wall outlet.

How do you start a dishwasher without the start button?

Check your electrical box for blown fuses, and reset if blown. Unlock the control panel by pressing and holding the "Heated Dry" button for three seconds. Turn the water valve underneath the sink on. Switch on the dishwasher wall switch, often located next to the garbage disposal switch.

How do you fix a dishwasher that won't start?

0:171:34How to fix a dishwasher that won't start - Which? advice - YouTubeYouTubeStart of suggested clipEnd of suggested clipTry unplugging your dishwasher and plugging in something else like a lamp for example. If the lampMoreTry unplugging your dishwasher and plugging in something else like a lamp for example. If the lamp works the problem will likely be with your dishwasher.

How do you unlock a Smeg dishwasher?

To annul the program, keep the START/PAUSE button (6) pressed until the program is interrupted (light on and confirmation beep). Press button (6) again and keep it pressed until the lights 4 and 5 (marked "end") come on.

Why are the lights flashing on my Smeg dishwasher?

The light flashes to indicate that the appliance is in “water hardness adjustment” mode.

What does the red light mean on a Smeg dishwasher?

Certain dishwasher models have been fitted with the ActiveLight system. This consists of a red LED light which projects a red spot onto the floor beneath the dishwasher door when the appliance is in use, meaning you don't have to open the door to check that it is running. The light goes out when the wash concludes.

How do you unlock a Smeg dishwasher?

To annul the program, keep the START/PAUSE button (6) pressed until the program is interrupted (light on and confirmation beep). Press button (6) again and keep it pressed until the lights 4 and 5 (marked "end") come on.

How long does a Smeg dishwasher take?

Smeg dishwashers have several pre-set programs to choose from. A basic wash and rinse can take as short as 27 minutes while a thorough cleansing with anti-bacterial washing and rinsing can extend to 2.5 hours.

How do you put detergent in a Smeg dishwasher?

2:414:28Smeg Dishwasher - DC122SS - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you literally plop your tablet in close your door turn on your machine and off you go if we lookMoreSo you literally plop your tablet in close your door turn on your machine and off you go if we look at the racking system on the machine basically we've got a height-adjustable rack.

What does the red light on my Smeg dishwasher mean?

Certain dishwasher models have been fitted with the ActiveLight system. This consists of a red LED light which projects a red spot onto the floor beneath the dishwasher door when the appliance is in use, meaning you don't have to open the door to check that it is running. The light goes out when the wash concludes.

What is a rinse aid dispenser?

The rinse aid dispenser is especially designed for rinse aids, a slightly viscous substance. Since vinegar is not as thick, certain technical problems may occur as a result. If, however, you need to wash plates which are covered in fish or egg residue, you can add a spoonful to the tub before the wash cycle starts to get rid of the grease and strong odors.

Can you use dishwasher salt?

You should only ever use special dishwasher salt, as it is very pure. Table, cooking, rock, and sea salts may contain additives that can actually increase water hardness. Also, the fine consistency of some of these salts mean they are likely to clog when wet, which could lead to various technical problems.

Can I hook up my SMEG dishwasher to a hot water supply?

All SMEG dishwashers are hot water-ready (max. 140°F) for further time and energy sav ings.

Does a SMEG dishwasher have a delay?

SMEG dishwashers that have the Delay Function also have a cold Pre-Wash Function which starts automatically once the door has been closed. The machine will stop and only restart at the pre-set time when this cycle is over. This feature is exclusive to SMEG, and is particularly-helpful in that your dishes are rinsed before the full wash program, preventing food residue from drying on, and making washing more-difficult than it needs to be.

Can you wash dishes in a smog dishwasher?

No, the latest SMEG dishwashers wash dirty dishes, pots, and cutlery extremely well thanks to programs which can reach 158°F, and advancements in washing powders. However, it's always a good idea to scrape off food leftovers, such as bones, which can block the filter, and remove fatty residue from substances like cheese and sauces. Rinsing your plates before putting them in the dishwasher is actually a waste of water.

Do you need to add salt to a dishwasher?

Not necessarily, although you would need to check that the water hardness level is at least 25°fH (French degrees) first. However, we recommend adding salt every time you use the dishwasher, as it helps the softener maintain its efficiency, and prevents marks from being left on your dishes.

Can I wash plastic cutlery or crockery in my SMEG dishwasher?

If they are dishwasher-safe, plastic crockery and cutlery items should be placed in the top basket. Please bear-in-mind that dryness levels may vary depending on the materials used in the products' manufacture.

What is a Smeg dishwasher?

Founded by Vittorio Bertazzoni in 1948 in Guastalla, Italy, Smeg is an Italian appliance manufacturer that is known for its stylish 1950s-type retro and contemporary appliance designs. Smeg offers a line of residential dishwashers with electronic control panels. If the circuit board in the control panel malfunctions, the dishwasher may stop in the middle of a dishwashing cycle. Reset your Smeg dishwasher to have it working again as soon as possible.

Why is my dishwasher not working after reset?

A dishwasher that experiences another malfunction after being reset may suffer from a faulty internal component. Contact the Smeg After-Sales department to obtain troubleshooting, repair and warranty information.

image

1.My Smeg Dishwasher Won't Start | eHow UK

Url:https://www.ehow.co.uk/how_7914718_troubleshoot-smeg-dishwasher.html

23 hours ago Videos. We offer help and advice in the form of videos. All you need to do is browse through the different videos that we have recorded so you can visually see how to fit a certain part or gain …

2.Videos of How do I Start my Smeg Dishwasher

Url:/videos/search?q=how+do+i+start+my+smeg+dishwasher&qpvt=how+do+i+start+my+smeg+dishwasher&FORM=VDRE

12 hours ago Close the dishwasher door, press a wash cycle button on the dishwasher's control panel and then the "Start/Pause" button. The Smeg dishwasher will start after a few seconds. Verify that your …

3.FAQ Dishwasher FAQ | Smeg

Url:https://www.smeg.com/us/faq/dishwashers.html

34 hours ago Can all-in-one dishwasher tablets be used with all SMEG dishwashers? We recommend reading the instructions supplied with all-in-one dishwasher tablets to check whether they can be used …

4.How to Reset a Smeg Dishwasher | Hunker

Url:https://www.hunker.com/13408989/how-to-reset-a-smeg-dishwasher

32 hours ago How to Reset a Smeg Dishwasher. Step 1. Open the dishwasher door and quickly close it. Make sure that the door latches properly; you should hear a soft "click" as the latch engages. Step 2. …

5.smeg dishwasher troubleshooting - YouTube

Url:https://www.youtube.com/watch?v=8iqLmn6VDFk

31 hours ago View & download Smeg user manuals. Welcome to the Smeg house, where you can feel at home among your loved ones, grow your ideas and share your experience.

6.User manual - Download Manuals - Smeg

Url:https://www.smeg.com/info/user-manuals

11 hours ago  · In today's repair guide, we'll be teaching you how to fix your Smeg Dishwasher. This video will include error codes, troubleshooting, and customer reviews. I...

7.Smeg Dishwasher Complete Repair Guide - YouTube

Url:https://www.youtube.com/watch?v=MU8-2wfJ1ME

17 hours ago  · SMEG Dishwasher Water Level Too High or Flooding. Often when you turn on a SMEG dishwasher, it’ll automatically turn on the anti-flooding system. This event occurs if you …

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9