Motion Sensors.
- Make sure your system is disarmed.
- Use the touchscreen to bypass the Motion Sensor.
- Make sure there is no movement in the area for two minutes.
- Walk in front of the Sensor, then check your system activity in the Xfinity Home app to see if the motion event was detected.
How do I bypass the motion sensor on my Xfinity system?
Make sure your system is disarmed. Use the touchscreen to bypass the Motion Sensor. Make sure there is no movement in the area for two minutes. Walk in front of the Sensor, then check your system activity in the Xfinity Home app to see if the motion event was detected.
How do I know if my motion sensor is working properly?
If the Sensor is set up with audible sound, you will hear it. If audible sound is turned off, you can view the activity using the touchscreen, the Xfinity Home app, or the Xfinity Home app for Xfinity X1. To ensure your system is working properly, test each Motion Sensor once a month and whenever you think one isn't detecting motion.
How do I reset the motion sensor?
Reboot the Motion Sensor by removing its battery, waiting a few seconds, then reinsert the battery. If the message remains, replace the battery with a fresh battery. If the problem is not resolved, it may be caused by an issue with your touchscreen's location. Has the touchscreen been moved from its originally installed location?
How do I enter test mode for each sensor?
To enter Test Mode: Follow the instructions below for each sensor that you’d like to test The Base Station will announce the sensor type to confirm that it has received the signal (If you have a professional monitoring plan, you will receive a phone call confirming the test)
How do you test a motion sensor?
Walk across the sensors field of view, the LED will illuminate when it detects motion. It is best to walk across the sensor, rather than directly towards the sensor. The sensor will repeat this process of waiting 30 seconds then lighting up as it sees motion. It will stay in the test mode for 3 minutes.
How do I reset my Comcast motion sensor?
Reset the Motion SensorPress the bottom of the face and push up to remove the sensor from the battery cover.Remove both batteries from the motion detector.While holding down the tamper switch (C), insert one battery into the motion detector.Release the tamper switch after one to two seconds.More items...
How does Xfinity Home motion sensor Work?
An Xfinity Home motion sensor detects unexpected motion in large sections of your home while you're away. Set rules to get real-time alerts or trigger other connected devices, like lighting when activity is detected.
How do I pair my Comcast motion sensor?
On the Sensor & Zones screen, tap Add a Sensor/Zone. On the Locating Wireless Sensor screen, do the following, then tap Next. Put the sensor in pairing mode by placing the sensor face down and removing the plastic battery tab.
How do you reset a Motion Sensor?
Turn your light switch on and off quickly, hitting each position four times. When the light comes on, turn the switch to the off position and wait five to seven seconds before turning it on again. The light should remain off and the motion detection unit should be reset.
How do you change a Motion Sensor battery?
0:411:52How to Replace the Battery for a Home Security Motion DetectorYouTubeStart of suggested clipEnd of suggested clipNext you must release the lens from the device by depressing three tabs on the device. Two on topMoreNext you must release the lens from the device by depressing three tabs on the device. Two on top and one on the bottom. Next remove the batteries insert the new batteries. Pay attention to polarity.
Does Xfinity camera have motion sensor?
Understanding Motion Notifications Motion Notifications send a notification to your phone each time your Xfinity Camera or Xfinity Video Doorbell detects motion. You can turn notifications on or off for any or all of your cameras and you can specify the type of activity that triggers a notification.
Who monitors Xfinity Home security?
Security is powered by Xfinity Wi-Fi and comes with 24/7 monitoring and fast response times. Equipment costs are not included in this monitoring plan. The Professionally-monitored solution is installed by expert Xfinity technicians.
Why is my Xfinity motion sensor blinking red?
The Motion Sensor Battery is Low.
What is a PIM sensor Xfinity?
OpenHome Converge Panel Interface Module (PIM) is a professional state-of-the-art device that allows you to manage your wired system and its sensors from your TouchScreen.
Why is my Xfinity motion sensor blinking red?
The Motion Sensor Battery is Low.
How do I send a refresh signal on Comcast?
To reset a Comcast signal through the help menu:Open the Settings menu.Navigate to Help > System Refresh.Choose Refresh Now and hit OK.The cable box will now begin a system refresh. ... After the refresh finishes, the box will automatically restart.More items...•
How do I manually reset my Comcast router?
To manually restart your Xfinity router, do the following: Locate the “Reset” button found either at the front or back of the router. Hold down the button for at least five seconds. Once you release the button, your router is reset and will restart.
How to test if motion sensor is working?
You can perform a Walk Test to ensure your Motion Sensor is visually working with the following steps: Remove the sensor’s cover by locating and pressing the rectangular-shaped button at the bottom of the sensor. Once the cover of the sensor is removed, confirm that you see the red LED turn on.
Can you walk across a sensor?
Walk across the sensors field of view, the LED will illuminate when it detects motion. It is best to walk across the sensor, rather than directly towards the sensor
How to send a test signal?
To do this, follow these steps: Press Menu on your Keypad. Enter your PIN if it asks.
Does SimpliSafe have a test mode?
Your SimpliSafe system has a built-in Test Mode to let you test all of your sensors. To enter Test Mode:
