Test the Door Switch. The door switch on a GE Profile refrigerator, turns off the water and ice maker, while the door is open. If this switch goes bad, then it will cause the ice maker to stop working. You will need to use your multimeter, to test whether or not the door switch is working.
How to reset a GE ice maker?
It is pretty identical for all the GE ice makers to reset them. Locate and turn the shut-off switch for 30 seconds, locate the feeler arm on the ice maker and push the feeler arm three times. It will do the job for you. Here we have discussed the process to reset some different ge ice makers below, stick to this section if you want to know –
Why is the ice maker on my GE Profile refrigerator not working?
The control arm is also used when resetting your ice maker. The door switch on a GE Profile refrigerator, turns off the water and ice maker, while the door is open. If this switch goes bad, then it will cause the ice maker to stop working.
How do I Turn Off the ice maker on my Refrigerator?
Locate and turn the shut-off switch for 30 seconds, locate the feeler arm on the ice maker and push the feeler arm three times. It will do the job for you.
How to fix an ice maker that is not working?
If the ice maker is not working as per the following steps, you can do nothing to fix it without a professional. After opening the ice bucket, you will reach the ice maker machine. The ice maker machine is just behind the bucket, so locate it first. If the Switch is turned off somehow, there is a high chance that the ice maker is not working.
How do I reset my GE ice maker?
How To Reset A GE Ice MakerRemove the ice bucket.Locate the power switch.Turn the power switch to "OFF."Wait 30 seconds.Turn the ice maker back on.Push the feeler arm up three times.
Why is my GE refrigerator ice maker not making ice?
If a GE ice maker isn't making ice, it may be too warm. GE recommends that the freezer should be set to 0 to 5 degrees Fahrenheit for ice production. If it's too hot, ice may not produce well or appear smaller or misshapen. On the other hand, if it's too cold, ice may build up and frost will prevent ejection.
How do I force my ice maker to cycle?
1:173:59Ice Maker - Cycle Test - YouTubeYouTubeStart of suggested clipEnd of suggested clipGo see the little notch at the bottom that's going to rotate 360 degrees all the way around. And itMoreGo see the little notch at the bottom that's going to rotate 360 degrees all the way around. And it will run through the various stages.
How do you manually cycle a GE ice maker?
5:536:56How to speed up your ice maker in diagnostic mode. - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlready has ISTEP wasn't harvest but it'll. Definitely save you some time and stuff like that so ifMoreAlready has ISTEP wasn't harvest but it'll. Definitely save you some time and stuff like that so if you have like a GE and your ice maker looks kind of like this one.
Why did my GE ice maker stop working?
A clogged water filter can restrict water flow to the icemaker. Water filters should be changed every 6 months. If your refrigerator has a water filter, try replacing your water filter. Purchase a GE Appliance part online.
How do you test an ice maker water valve?
0:392:23How To Test Your Fridge's Water Valve - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe two metal probes together will zero out to test your Bell touch one probe to each terminalMoreThe two metal probes together will zero out to test your Bell touch one probe to each terminal depending on the part your valve canary between 200 and 500 ohms.
How do you jumpstart an ice maker?
3:484:44IceMaker Not Working - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter you jumpstart the water you want to make sure that this cycles through so you'll just startMoreAfter you jumpstart the water you want to make sure that this cycles through so you'll just start the icemaker. Itself. This is start to turn once you see attorney.
Why is my ice maker not working but water does?
Cause: There is also a possibility that the water filter for the ice maker is clogged. Fix: Locate and replace the water filter. Filters for ice makers are typically located inside the refrigerator (to keep them from freezing).
How do I know if my ice maker is working?
To check if the icemaker itself is working:If the icemaker mold is empty, you can manually pour about 4 ounces of water in the icemaker mold.Wait about 2 hours.If the icemaker has dropped ice cubes out from the mold, you know the icemaker itself is working.
How do I make my GE refrigerator ice maker work?
0:003:05Icemaker Troubleshooting - French Door Refrigerators - YouTubeYouTubeStart of suggested clipEnd of suggested clipHowever. If you have a cafe model you must first select settings. On the touch screen then navigateMoreHowever. If you have a cafe model you must first select settings. On the touch screen then navigate to the second page menu. And select icemaker to turn the unit on or off. Next.
Where is the ice maker switch on a GE refrigerator?
For these refrigerator models, you turn the icemaker ON and OFF using the control panel on the fridge. ON/OFF Toggle Switch: This icemaker design has an ON/OFF switch similar to a light or power switch. ON is at the top of the toggle switch while OFF is at the bottom of the toggle switch.
How do I get my GE refrigerator to make ice?
0:001:37French Door Refrigerator Icemaker Operation - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you want to turn the icemaker off tap the icemaker or ice button depending on which modelMoreIf you want to turn the icemaker off tap the icemaker or ice button depending on which model refrigerator you have you may have to hold that button for 3 seconds to activate.
How to reset a GE profile ice maker?
Step 1: You will need to pull your GE refrigerator out from the wall and locate the power cord. Pull the power cord out from the outlet, and wait around 60 seconds.
Why is my GE profile ice maker not working?
The GE Profile’s icemaker may not be working, if there is a problem with the filter, with the door switch, or with the temperature not being correct. You could also have more advanced problems, such as a bad inlet valve, or a blocked-up water line. Having ice when we need it, has become a necessity. Appliances break, and when they do, it can be ...
Why is my GE refrigerator not getting water?
Not getting water can be from more than one issue. You could have a clogged water line, that is clogged with debris, or you could have a frozen water line. Both of these could keep the ice maker from making ice. You will need to inspect the waterline.
Why won't my refrigerator inlet valve work?
An inlet valve may not work correctly if there is not enough water pressure. First, check your water pressure, to make sure there are no issues, before testing the inlet valve. Always make sure that the refrigerator is unplugged when replacing parts, or testing parts for continuity.
What happens if the door switch on a GE refrigerator goes bad?
If this switch goes bad, then it will cause the ice maker to stop working. You will need to use your multimeter, to test whether or not the door switch is working.
Why is my GE ice maker not making ice?
GE ice maker not making ice fast enough. The biggest problem that causes this, is having a restricted water line, or not enough water pressure. Check to make sure you are getting at least 20 PSI for water pressure. Then, check to make sure there are no clogs in the waterline.
What happens if GE profile ice maker is defective?
The GE Profile ice maker has a water inlet valve, that is electronically controlled. If the valve is defective, it will not open up to let the water in. You will need to use your multimeter, to check the inlet valve for continuity. If it is defective, you will need to replace it.
1. Is the Ice Maker On?
This simple solution is more common than most people would want to admit. Most GE ice makers have either an on/off switch or a mechanical arm that needs to be down for the ice maker to work. Depending on the model, the on/off switch may be located on the ice maker or be accessed through the refrigerator’s digital display.
2. Is There a Diagnostic Function?
Some GE refrigerators will have a diagnostic function that may be able to identify the problem for you. Check the refrigerator’s manual or tech sheet for instructions to operate the diagnostic mode and interpret the results.
3. Reset the Ice Maker
Sometimes, an issue with the ice maker can be solved by performing a reset. Of course, if a defective part is causing the issue, the part will still need to be repaired or replaced. Often the ice maker will have a reset button or a way to reset it through the digital display panel.
4. Check the Mechanical Arm
As mentioned above, if your ice maker has a mechanical arm, it needs to be down for the ice maker to work. The arm can also fail if the arm’s spring has broken. Check the arm for signs that the spring has broken, and replace the arm if it is found to be defective.
5. Check the Water Filter
Another simple and often overlooked solution is that the water filter needs to be replaced. Some GE refrigerators have a sensor or timer that will stop the ice maker from working if the water filter needs to be changed. This is a safety feature to ensure the ice and water are safe to consume.
6. Is the Water Supply Line Connected?
Check that the water supply line is connected to the refrigerator and ice maker. Also check that the water is turned on. The water supply line can be checked where it connects to the back of the refrigerator and where it connects to the ice maker inside the refrigerator.
7. Check for Cracks in the Ice Tray
If your model features a rotating ice tray, a crack in the ice tray can stop the tray from rotating and emptying the ice. If cracked, it should be replaced.
Study the User Manual
Get the user manual and study it carefully. To do this, turn to the back of the refrigerator and locate the label first.
Get Acquainted with the Refrigerator Icemaker Assembly Kit
To get acquainted with the refrigerator ice maker assembly kit, place the kit on a flat surface. Then, bring out all the parts in it.
Unplug the Refrigerator
Remove the power cord of the refrigerator from the wall outlet if it is reachable. If you cannot reach it, locate the circuit breaker and trip it.
Install the Ice Maker
To install the ice maker, open the freezer door and bring out the shelves in it. Then, check for an ice maker water line.
Fix the Water Valve Assembly
With the icemaker in place, undo the screws at the back of the refrigerator and remove the panel. Next, locate the water valve assembly by the side of the compressor and insert the water line into it
