how do i turn a car subwoofer into a house sub

• Buy a Power Inverter that turns the home 110 Volts into 12 Volt
• Connect your subwoofer to your car amplifier
• Connect your car amplifier to the home amplifier
• If there are additional speakers hook them up
• Plug in the Power Inverter. Enjoy! While the idea of using your car subwoofer in your house is a really good prospect that a lot of people would pounce on ...

How to power a home subwoofer from a car?

Basically, you need to purchase a car subwoofer amplifier and an inverter to power your home subwoofer. The explanation of the procedure is listed above, in the article.

How to convert a speaker into a subwoofer?

You can convert a speaker into a subwoofer by removing the cross-over of tweeters, cover the hole, attach the unit o bass with the subwoofer, build a box, add additional resonant elements, and seal the ports. 1 How to Convert a Speaker into Subwoofer?

Can you use a car amplifier for a car subwoofer?

However, it is usually a 120-volt amplifier, and your car battery produces only 12 volts. You could purchase an inverted one, but those are a temporary solution at best. The good thing is that the amplifier used in most active subwoofers is not very good; therefore, a cheap car amplifier is more than adequate to replace it.

How many ohms do you need for a car subwoofer?

For example, using a 4 ohm car sub is relatively simple, while using a 2 ohm or another type can be more complicated. Two 4 ohm car subwoofers: This is one of the simplest setups possible. Just connect the subs in series for a total of 8 ohms and connect them to one of the stereo receiver speaker outputs.

How do I turn my car audio system into a house?

3:4310:52DIY - How to Make a Home Stereo from a Car Stereo - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the two wires you want to connect are in this case the red which is the switch power ignition.MoreSo the two wires you want to connect are in this case the red which is the switch power ignition. Lead that lets you know that the car is on and also the yellow. And yellow right here says battery.

Can you hook up a car subwoofer to your TV?

Using a Direct Connection Plug the HDMI cable to the TV's port and then locate the audio input port on your subwoofer. Once you've found that, connect the other end of the HDMI cable to the subwoofer. And there you have it!

How do you hook up a subwoofer to a home stereo?

If you are using your subwoofer with a home theater receiver, the connection is simple: Just run an audio interconnect cable like this one from the receiver's subwoofer output to the subwoofer's line input (pictured above). If the subwoofer has an input labeled LFE, use that one.

What is the difference between car subs and home subs?

The size difference also creates a difference in efficiency between the two subwoofers. The subwoofer in your home is designed to move a lot of air and produce sound for a large area. The subwoofer in your car is designed to fill the vehicle cabin with sound, which is a much smaller space.

Can you use a car subwoofer in home audio?

Thinking about putting that extra car sub to good use? Maybe you're wondering if it's possible to hook up a car subwoofer to a home stereo or amplifier at all. The good news is that yes, in many cases you can use a car sub with a home stereo. However, it's not as easy as just wiring them up any old way.

Can you run a subwoofer without an amp?

In nearly all cases, the answer is yes. Unless you have a system in your car or boat that is already powering a subwoofer, you'll need to find an amplifier that will power your sub. Your head unit will typically provide a low-power signal (RCA output) that can be used for an amplifier to power your subwoofer.

Can you run car speakers on a home stereo?

So to put it bluntly, if you're still wondering “can I use car speakers for home audio?” The answer is you technically could, but it won't sound good, just saying.

How do you hook up a subwoofer to a home amp?

Using a subwoofer cable (RCA cable), connect the subwoofer to the AV receiver by running the cable from the receiver's subwoofer output to the subwoofer's line input. Klipsch subwoofers can be connected via the LFE channel, the white RCA connection, or in a stereo pair by using both the white and red RCA connections.

Why do subwoofers have left and right inputs?

The left and right inputs on your subwoofer are there to give you another level of control over the sound it creates. In the end, both the left and right sides come together in an LFE cable, allowing the subwoofer to evenly output, and have more precise control over the sound it emits.

Can you use a car amplifier for home audio?

Yes, it's possible to use a car amplifier in your house. You can also connect a car amp to any home stereo, your smartphone, and more as an audio source. There is a catch, though. Because car amps use a different power source than home stereos the biggest problem is getting them the power they need.

Is car and home speaker wire the same?

copper wire gauge is the "key", the larger the wire (smaller wire gauge numbers) the lower the resistance per foot and the least amount of voltage drop on the cable run. Auto speaker wire may have a slightly tougher insulation material (and pretty colors), but the copper conductor is the same.

What is a House sub?

A subwoofer (or sub) is a loudspeaker designed to reproduce low-pitched audio frequencies known as bass and sub-bass, lower in frequency than those which can be (optimally) generated by a woofer.

Can I just add a subwoofer to my TV?

A powered subwoofer can be connected directly to a TV's output jacks to boost the bass. An audio Y-adapter condenses the stereo signals into a single signal for the subwoofer to reproduce the bass frequencies. Power management is essential to prevent the subwoofer from overpowering the TV's built-in speakers.

How do I connect my subwoofer to my Samsung TV?

0:030:57How to Pair A Samsung Soundbar With Subwoofer - YouTubeYouTubeStart of suggested clipEnd of suggested clipCome up. And then you're going to hold down the top button of the directional pad for five seconds.MoreCome up. And then you're going to hold down the top button of the directional pad for five seconds. Until you see id set pop up on the screen of the sound. Bar.

How do I connect my subwoofer to my Samsung Smart TV?

Follow the steps below to connect your Smart TV to your speaker:Prepare an HDMI cable.Connect the cable to the TV's HDMI IN (ARC).Connect to the HDMI OUT (TV-ARC) port of the speaker that you want to connect.Turn the speakers on that are connected to the TV.More items...•

How do I connect my subwoofer to my LG TV?

0:401:53How to Pair an LG Soundbar with Subwoofer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce your sound bar is turned off you're going to come back over here to the back of the subwoofer.MoreOnce your sound bar is turned off you're going to come back over here to the back of the subwoofer. And you'll see the light is red right there now from here. We're going to push.

Can I hook a car subwoofer to my home stereo?

A 4 ohm car subwoofer cannot be used directly with a home stereo. They can be wired for 8 ohms or powered with a compatible amplifier to be used wi...

Will a sub work without an amp?

A subwoofer needs an amplifier to perform as expected so an amp is required for the necessary power.

How many watts do you need for a subwoofer?

For easy listening, low-volume music levels, or sound from movies, you'd want at least 25 watts RMS of power per channel available to drive a home...

How many ohms can a subwoofer have?

You have a subwoofer or more than one subwoofer that can be wired for at least 8 ohms total. This can be two 4 ohm subwoofers or a 4 ohm dual voice coil (DVC) subwoofer. [See diagrams below for how]

What does sensitivity mean in subwoofers?

Some subwoofers produce more volume for the same amount of power. This is actually a standard specification used to compare speakers and the official name is speaker sensitivity. In other words, the sensitivity of a speaker describes the volume output it produces for a given amount of power, in decibels (dB).

Do I need a speaker crossover for a car subwoofer?

These are used to get “clean” sounding bass from a subwoofer when there’s no crossover already provided.

How many ohms can a home stereo handle?

Your home stereo or amp can handle 4 ohm speakers (most can’t so let’s ignore this).

What does it mean to match a speaker to a home stereo?

Matching the speaker load to your home stereo just means matching it up with the best Ohm load that will deliver the power & volume it’s designed to produce. As you can see in my diagram above, if the speaker is over the rated Ohm spec, it will work safely but at the expense of delivering a lot less power and volume than you’d like.

Do you need a subwoofer for a home stereo?

That’s often not the case for home stereos, although some do have a subwoofer RCA output jack for use with an amplifier or powered subwoofer. The point is that unless you want to hear vocals and other sounds from the car subwoofer, you’ll need to hook up a subwoofer speaker crossover between the stereo & the sub.

Can a home stereo handle a 4 ohm speaker?

The single biggest obstacle is that most home stereos, home theater receivers, and home amplifiers can’t handle the 4 ohm speaker load of many car subwoofers. It’s 2x lower than the 8 Ohm minimum most require. (Some car subwoofers are even 2 ohms, in fact).

How to connect two speakers in series?

Let suppose you have two speakers named as speaker A and B. Connect the speaker A the positive terminal to the wire of connection positive terminal then? connect the negative terminal of the speaker A with the positive ?terminal? of the speaker B. And thus you have arranged the speakers in the series you can arrange these speakers arrangement of series easily and this is the first step.

What is the impedance of a car speaker?

The impedance of the car speaker is 4 Ohm whereas the impedance of the home speaker should be 8 Ohm. The most important thing you should do while doing these is to arrange the speakers in series and get hooked up.

How many liters of speaker enclosure?

You can see the volumes for the speakers as the if the impedance of the speaker is 4 Ohm then the speaker enclosure of 15 to 20 liters will be fine. The choice of a perfect enclosure is very important for car speakers.

Why is it important to have an amplifier for a car speaker?

Your amplifier gets heat up if requires high power for working. We know that the car speakers have low impedance so they put more pressure on the amplifier and the amplifier gets heat up so you should keep an eye on the amplifier to protect it from overheating and getting burned up.

What is the best type of speaker enclosure for car speakers?

The choice of a perfect enclosure is very important for car speakers. There are following types of speaker enclosure: Sealed enclosure: It is the best sort of the speakers which enclosed the speakers and it produces a maximum frequency response and cone control. It will produce maximum sound loudness.

Which type of speaker has two speakers facing opposite each other?

Biphasic speaker enclosure: It is the best form of the enclosed speaker which has two speakers and these speakers have two speakers facing opposite to each other and it is the best speaker of the room which has the ability to produce the optimum level of sound quality.

Do car subwoofers look good?

Aesthetically the car subwoofers are very beautiful. So they will surely look beautiful at home. But you should keep in mind that the car subwoofers are for smaller space they cannot produce the optimum effect in the home. So you will not face too much sound quality and effectiveness of sound.

How to attach an amplifier to a subwoofer?

Take some wood screws and attach the amplifier to the top of the subwoofer. This is optional but it helps to create a self-contained unit.

How many coils does a subwoofer have?

You will need to determine how many voice coils the speaker has. Some woofers have only one and will have two wiring terminals. Other subwoofers have two voice coils and will have four tabs where wires are connected. It does not really matter, but it will help you determine how to wire the subwoofer to the amplifier.

How to remove plug adapter from speaker?

Remove the screws that hold the plug adapter assembly in place and remove the assembly. Snip off the wires that go to the speaker itself and discard the other electronics. Get rid of the power cord. This is only used for the amplifier so you won't be needing it anymore. If the assembly can't be removed, you will need to cut an opening in the box. Make sure that it is the same size as the speaker terminal block you will be installing.

How Do You Hook Up a Subwoofer?

Once you have your subwoofer, equipment, and materials, you can easily hook up the subwoofer to your car’s stereo system. I have broken down the process in some simple steps below.

Where Is the Best Place to Put a Subwoofer?

Without a doubt, the trunk is the most popular place for the subwoofer. Since they tend to be heavy and big, the trunk is the perfect place to house the subwoofer.

How Many Watts Do You Need For a Subwoofer?

The one thing you absolutely should make sure of is that you get the right watts for the subwoofer system. Here is a basic guide you can follow:

Do You Need an Amp for a Sub?

If you want a subwoofer in your car, you will definitely need an amplifier. There are some articles I’ve come across that show people how to install the subwoofer without an amplifier. I tried out the subwoofer system with and without the amplifier, but honestly, after putting in so much effort to install the subwoofer, the subpar quality of the sound without the amp bummed me out.

What gauge wire is used for a stereo?

The 16-18 gauge wire runs through the back of the console. This wire is the main component that will turn on the amplifier when the stereo is on as well. You will also be able to spot the remote wires coming out of the back of the unit. They are blue wires that may be labeled as any of the following:

Can you wire a subwoofer with a fuse box?

You may even end up blowing a fuse if you wire the subwoofer with the little ones on the fuse box.

Should a Subwoofer Be On the Floor?

Car subwoofers are usually heavy, clunky, and big. You probably won’t have much choice when it comes to their placement since they will eventually end up on the floor. However, the sound can get thin or boomy, depending on where you put it. This has to do with the room interface and the basic output of the subwoofer. You may have to experiment a little with the location to get the most out of your subwoofer.

Do I Need an Amplifier With My New Sub-Woofer?

In short, yes. Installing a subwoofer in your car without considering an amplifier is a mistake. Whenever you install new speakers in your vehicle, you need to consider your power needs, and the best way to ensure additional power is with an amplifier.

What Other Equipment Do I Need?

Apart from your new amplifier and subwoofer, you’re going to need to get a few other things to complete your installation.

Decide Where to Install Your Amplifier and Sub-Woofer

Most people chose to install their amplifier and sub-woofer in the boot as this is generally an area with plenty of space and ventilation. However, depending on the type of vehicle you own, and the size of your subwoofer, you could choose to install it under the driver’s seat or some other location.

Installing the Power Wire

Step 1: Ensure that there is a ring connector fitted to one end of your heavy-duty power lead. This may already be attached to your power cable if you bought a sub-woofer & amplifier wiring kit. If not, you will need to attach one. If you are not sure how to use a crimping tool to fix a ring connector, we recommend watching this YouTube Video.

We Have Power, Time for Some Audio

Step 8: With the power wires in place, you now need to get the music from your stereo to the amplifier and sub-woofer. At this point, you need to gain access to the rear of your car stereo. If you have an aftermarket stereo installed, you need to get access to the RCA ports on the back of the stereo.

Connect The RCA Cables

Step 10: Connect one end of the RCA cables contained in your wiring kit to the RCA output points at the back of your stereo, or on your installed line output convertor (factory fitted stereo only), and run the wires down through the dash towards the driver’s side floor.

How to convert speaker to subwoofer?

You can convert a speaker into a subwoofer by removing the cross-over of tweeters, cover the hole, attach the unit o bass with the subwoofer, build a box, add additional resonant elements, and seal the ports. Contents [ hide]

What is a subwoofer?

Subwoofer explained. A subwoofer or sub is a loudspeaker or a woofer. Its fundamental function is to produce sound frequencies of low-pitch. It is also called bass in general language. The structure of a sub is generally enclosed with plastic or wood. Its structure is a type of loudspeaker that can include a lot of woofers.

How many volts does a Bluetooth USB amplifier need?

DC adapter: You need two twelve volts DC adapters to supply power to the Bluetooth USB amplifier.

What is the frequency range of a sub?

You can also find the subs with a frequency range below eighty hertz in the market.

Is a speaker a transducer?

Speaker explained. Conversely, it is just a loudspeaker and nothing other than it . It is known as a transducer electroacoustic. It merely converts the electrical signals into audio. The fundamental rule that it follows is the fluctuations of the electric signals make the device to coincide with it.

Can you use fiberglass insulation to hide speaker wires?

So carpet underlay of foam is a much better and cheap option to hide the speaker wires without cutting wall. You can also use fiberglass for insulation. Moreover, people also utilize pillows for this purpose.

Do you need to fill a subwoofer enclosure?

It is not necessary to fill the enclosure. But you have to cover the essential areas completely. If your subwoofer is cylindrical, then you have to line the internal wall with some insulation.