Make sure the transmitter is charged or plugged in and turned on Carry the collar by hand to the invisible or wireless fence boundary Depending on the model it will beep and/or lights will flash as you get close to the boundary
Full Answer
How do I replace the battery in my Invisible Fence collar?
How do I replace the battery in my Invisible Fence Computer Collar? Use a small, thin coin to remove the Power Cap battery from the Computer Collar unit. Insert the coin in the slot on top of the Power Cap unit and turn it 45 degrees counter-clockwise.
How do you check if an invisible fence collar is working?
How Do You Check An Invisible Fence Collar? Make sure the transmitter is charged or plugged in and turned on Carry the collar by hand to the invisible or wireless fence boundary Depending on the model it will beep and/or lights will flash as you get close to the boundary Place the collar’s static correction contacts on your forearm.
How do you use an invisible fence for a dog?
A boundary can be marked by placing an electric fence underground. The electric fence creates an electrically charged boundary connected to an invisible fence collar that the dog wears around its neck. Adjusting the strength of the collar is very easy. Just take the collar out from the dogs’ neck before adjustment.
How do I Move my Invisible Fence to a new home?
Bring your Invisible Fence Brand transmitter and Computer Collar Receiver with you to your new home and contact us at 866-804-1250 to install new boundary wire, flag your property and re-train your pet (s) to their new boundaries. To request a service appointment online, click here. How do I purchase an Invisible Fence system?
How do you turn on Invisible Fence Brand collar?
A light on the receiver will flash. Push the button again within five seconds of the first push and the light will flash from one to five times. That will tell you the current correction level. Push it again within five seconds and the correction level will change.
How do I turn my electric fence collar on?
Increase the Static Correction Level by pressing and releasing the Correction Level Button within 5 seconds of the previous flashes. The Static Correction Levels increase from 1 to 5. Pushing the Correction Level Button while the Receiver Collar is on level 5 will cause the Receiver Collar to revert to level 1.
Why isn't my invisible fence collar working?
My pet's Invisible Fence collar doesn't activate at the boundary, what is wrong? Ensure that your pet's Computer Collar receiver is fitted properly to his neck. The collar should be snug enough to slide only one finger between a correction post and your pet's skin.
How do I know if invisible fence collar is working?
A light on the battery tester and audible tone on the receiver confirms that the collar is operating properly. If you get the audible warning but not a light, replace the battery.
How does the invisible fence collar work?
A transmitter, usually placed in your basement or garage, sends a radio signal along the wire. The radio signal is picked up by your pet's Computer Collar, which emits a warning sound when your pet approaches the Invisible Boundary.
How do you reset an invisible fence collar?
Plug in the transmitter. The system and transmitter should reset automatically upon being plugged back in. Wait for a few seconds and look for any abnormality in the lights.
How do you activate the petsafe collar?
The collar will automatically turn on whenever it is removed from the charger. To turn on the receiver collar when it is not on the charger, press and hold the mode button for 1 second (2B). Avoid touching the metal contact points. Next, the indicator light will flash green once and then go off for 1 second.
How do I turn my petsafe collar on?
1:142:08How to Set Up the PetSafe® YardMax® Receiver Collar - YouTubeYouTubeStart of suggested clipEnd of suggested clipBy pressing the button again at level six the collar will start over at level one refer to the tableMoreBy pressing the button again at level six the collar will start over at level one refer to the table in the operating guide to choose the correction level that best fits your pet.
Why is my wireless dog collar not working?
The light may come on and fade out. Place the battery back into the collar and twist to lock. Confirm that the collar powers on. If the collar does not power on, replace the battery with a new RFA-67 battery.
Why is my electric dog collar not working?
Make sure your battery is charged in both the collar and the transmitter. Low battery charge can make for inconsistent functioning. Make sure both pieces are turned on and that the unit is properly synced so that the collar is receiving a signal from the transmitter.
Why is my wireless dog fence not working?
Transmitter blinking or beeping When troubleshooting problems with a PetSafe transmitter, start by replacing the battery. More often than not, transmitter issues are just due to lack of power. On most models, the test light should tell you if power is low.
How long do Invisible Fence collar batteries last?
How often should I replace the battery in my Invisible Fence Computer Collar? We recommend changing the battery every 3 months - it's the safest, easiest and most reliable way to guarantee your pet's safety 100% of the time.
How do you test an E collar?
0:090:42Using the Test Light with Your SportDOG E-Collar System - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn hold the test light contacts to the contact points press the stimulation button on the remoteMoreOn hold the test light contacts to the contact points press the stimulation button on the remote transmitter. The test light will flash at higher stimulation levels the test light will flash brighter.
How do you test a shock collar on yourself?
The easiest and safest route to testing the collar's shock stimulation on yourself, is by simply placing your hand, arm or finger across BOTH contact points.
How does a wireless dog collar work?
Your pet wears a collar programmed to detect the radio signal (called a receiver collar.) If your pet gets too close to the underground wire, the radio signal triggers a 'beeping' noise from the receiver collar that alerts the dog (or cat) to retreat away from the buried wire.
How does a boundary collar work?
The transmitter box emits a radio signal that is carried by the insulated copper wire. When your dog (wearing the collar) approaches the fence line, the radio signal emitted from the wire activates your dog's receiver collar to deliver a warning beep then a static stimulation if they continue towards the fence line.
Why is my invisible fence collar blinking green?
When you first insert the battery into your receiver, the status light will flash green. This indicates that the receiver has started properly. In the event that the lights do not flash, check the battery to be sure that it has been inserted properly.
How do you reset a shock collar on a dog?
Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. You may need to hold both units 2-3 feet from each other before this occurs. Once the Receiver Indicator Light has flashed 5 times, the Collar Receiver has been reset and will begin flashing as normal.
Why is my Invisible Fence collar beeping but not shocking?
Why is my Invisible Fence control panel beeping? If your Invisible Fence control panel is beeping every second, the most likely issue is that you have a wire break somewhere on your property. These can be caused by digging too deep when working in the yard, burrowing animals, and even the weather.
How do you charge an Invisible Fence collar?
0:091:23Rechargeable In Ground Fence™ System :: How to Charge the CollarYouTubeStart of suggested clipEnd of suggested clipSimply take the charger out of the box and plug it into a power source on the other end of theMoreSimply take the charger out of the box and plug it into a power source on the other end of the charger. You'll find the cradle clip. This cradle onto the collar.
How do you reset a shock collar on a dog?
Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. You may need to hold both units 2-3 feet from each other before this occurs. Once the Receiver Indicator Light has flashed 5 times, the Collar Receiver has been reset and will begin flashing as normal.
How do you reset an electric dog fence?
0:061:12Resetting the Collar Battery for Pet Control HQ Electric Dog Fence ...YouTubeStart of suggested clipEnd of suggested clipFollow your fingers along the wire until you get to a white clip. Next unclip the wire from theMoreFollow your fingers along the wire until you get to a white clip. Next unclip the wire from the receiver collar leave it unclipped for 10 seconds. And then reclip.
How do you charge an invisible fence collar?
0:091:23Rechargeable In Ground Fence™ System :: How to Charge the CollarYouTubeStart of suggested clipEnd of suggested clipSimply take the charger out of the box and plug it into a power source on the other end of theMoreSimply take the charger out of the box and plug it into a power source on the other end of the charger. You'll find the cradle clip. This cradle onto the collar.
Why is my dog invisible fence collar blinking red?
Why is my Invisible Fence collar blinking red? If you have started to see a red flashing light on your pet's Computer Collar unit, your Power Cap battery may need to be replaced. You can order replacement batteries online, from your local dealer, or by calling 1-800-824-3647.
How to adjust the strength of a dog collar?
For all models use the following steps to adjust the strength to the proper setting: Start at the lowest setting. Place the collar on your dog. Take your dog to the invisible or wireless fence boundary.
Where to place collar static correction contacts?
Place the collar’s static correction contacts on your forearm.
What Level Should I Set My Shock Collar?
When training initially you should start without a static correction setting. Use treats and praise to teach them the edge of the invisible or wireless boundary.
How Many Volts Should A Dog Shock Collar Have?
Other sources have claimed that shock collars range from 400 to 6,000 volts. This does not seem to be true.
How Do I Know If My Shock Collar Is Working?
You want to set it to a minimum setting where your dog notices the static correction and doesn’t yelp or seem stressed or in pain.
Where Should A Shock Collar Be Placed On A Dog?
Shock collars should be placed on your dog ’s neck under their chin. Follow the instructions above to properly fit and tighten a shock collar.
How Long Should You Leave A Shock Collar On A Dog?
As this article relates to invisible and wireless fences we will answer this question as if you are using a shock collar to keep your dog inside your fence.
1. Receiver Collar
If your invisible fence collar is not working. First thing is to check its the receiver collar is beeping or not. Remove the collar from your dogs’ neck. Now check the battery of the collar is properly installed or not. If not then take the battery out and install it again. Move to the boundary and check the test lights.
2. Boundary Wire
When the boundary wire of an invisible fence is broken due to some reason it cannot work properly. A broken boundary wire cannot transmit the electrical signals to the collar. You can detect a defect by yourself or you can seek help from a professional electric technician.
3. Fence Transmitter
Check your transmitter is plugged-in properly. If the fence transmitter is not working then change the plug. It might be the case that the plug is non-functional. However, after changing the plug if your lights are not working but an alarm is fine then check transmitter wires.
4. Changing Signals
There can be an interruption of signals between the transmitter and the collar. Try to make sure that the transmitter is not close to metal objects. If your transmitter is at a distance of fewer than three feet then it can disrupt the signals. Transmitters should be placed away from dishes, cables, and telephone wires.
How snug should an invisible fence collar be?
The Invisible Fence collar should be snug enough to slide only one finger between a correction post and your pet’s skin. Remember to adjust the fit of the collar as your pet’s coat, weight, and age change. Your pet’s coat may change from season to season.
How to contact invisible fence?
Bring your Invisible Fence Brand transmitter and Computer Collar Receiver with you to your new home and contact us at 866-804-1250 to install new boundary wire, flag your property and re-train your pet (s) to their new boundaries. To request a service appointment online, click here.
Why does my invisible fence beep?
These can be caused by digging too deep when working in the yard, burrowing animals, and even the weather. The most important thing to know is that your fence will NOT contain your pets when there is a wire break, so you should not let your pets outside until the issue is resolved. To set up a service call for a wire break, call 866-804-1250 or request a service appointment from your local dealer online by clicking here.
How to schedule a service appointment for invisible fence?
Request a service appointment online by clicking here or by calling us at 866-804-1250. At your service appointment, our Technician will test your entire system including the control panel, lightning and surge protection, Computer Collar Receivers, indoor units, and underground wire. We will provide a complete system analysis and make any necessary repairs to your Invisible Fence system.
Is invisible fence CE compliant?
CE - All Invisible Fence products sold within the European Economic Area (EEA) are CE compliant and bare the CE mark.
Can you put invisible fence wire on an existing fence?
Yes! Invisible Fence system boundary wire can be installed along an existing fence for reinforcement from digging, jumping, or getting out of an open gate. Our Pet Safety Professionals can aid you in the design of your system.
Can you use an invisible fence on a multi pet home?
Yes! Invisible Fence is the perfect solution for multi-pet homes. When used in conjunction with our MicroLite Computer Collar receivers, the Shields Indoor Solutions can be customized for multiple pets. You can keep one pet outside while allowing another to enter, you can separate food bowls, or you can even keep a certain pet off the couch – the options are endless. Learn more about Shields Multi-Pet Solutions.
Can you put water in a pet's computer collar?from invisiblefence.com
Other batteries do not fit properly and can allow water into your pet's Computer Collar® Unit.
Is invisible fence battery safe?from invisiblefence.com
Official Invisible Fence Brand patented Power Cap Batteries are the only safe battery to protect your pet. Failure of the Computer Collar® Receiver due to usage of an unauthorized battery would put your pet at risk, and may result in voiding the warranty.
