Easy de-calc Plus.
- Unplug the steam generator.
- Place the steam generator at the edge of a table or sink. Hold a cup (at least 900 ml) under the EASY DE-CALC knob.
- Remove the knob. Let the water and scale particles flow out.
- Put the knob back in place and turn clockwise to tighten.
- You are now ready to keep ironing! * Warning: If you are performing decalc after ironing or when the steam generator is hot/heated up, unplug the ...
What type of water should I use in my Philips steam generator?
We recommend using tap or demineralized water for all Philips steam generators and irons. Demineralized water is the best option to prevent limescale build up in your iron. Please never use ironing or perfumed water in your Philips steam generator iron.
Can I Leave my Philips steam generator iron unattended?
The powerful and continuous steam in Philips Steam Generator Irons tackles even tough creases, and thicker fabrics are smoothed out with ease and speed. We guarantee this iron will never cause burns to any ironable fabric when it is left unattended. You can safely leave it resting on your clothes or ironing board.
How do I clean the inside of my steam generator?
The container was provided with your steam generator in the box. Press and hold the CALC CLEAN button for 2 seconds, until it beeps. NOTE: For some models, the calc-clean button is in front of the iron handle. The iron will start to clean itself, this will take about 2 minutes.
How do you descale a whirlpool steam generator?
When your steam generator beeps and the CALC CLEAN light flashes, it's time to descale. Fill the water tank halfway and ensure that your steam generator is turned on. If your iron has a temperature dial with CALC CLEAN setting, set the dial to CALC CLEAN. Place your iron on the SMART CALC CLEAN container.
How do you use a steam iron for beginners?
0:431:25How to Use a Steam Iron - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe right setting for your Garmin. Step 3 place your garment flat on the ironing board no need toMoreThe right setting for your Garmin. Step 3 place your garment flat on the ironing board no need to thread it over the end iron. Like so and you will notice that the steam will penetrate the fabric.
Why is my Philips steam generator not steaming?
If the water level on your Philips Steam Generator Iron is below the minimum level or there is no water in the tank, your iron is not able to generate steam. Please refill the water tank with water. Ensure that there is water in the tank or that the water is above the MIN level icon.
How do I unlock my Philips steam iron?
Press the carry lock release button to unlock the iron from the iron platform (Fig. 9). Press and hold the steam trigger to start ironing (Fig. 10).
How does the Philips Perfectcare steam iron work?
1:004:10GC9550 Philips PerfectCare Steam Iron review - Appliances OnlineYouTubeStart of suggested clipEnd of suggested clipThis is how easy it is to use so you've actually got the iron itself again with no variableMoreThis is how easy it is to use so you've actually got the iron itself again with no variable temperatures. So no dial at all it uses opti temp. Technology.
Why is there no steam coming out of my steam iron?
Water level may be too low CAUSE: The first and most common reason for steam iron press not steaming is very little water in the water tank of the press. If there is little or no water in the tank, then the iron won't be able to produce steam and hence iron the clothes properly.
Why is my steam generator iron not heating up?
CAUSE: One of the reasons for iron press not heating up could be the build-up of Limescale deposits on the soleplate. These deposits can clog the plate and the iron wont heat or produce steam properly in such a case. SOLUTION: To resolve this issue, switch the iron off and let it cool down.
How do you use a Philips steamer?
0:301:29How to Use Philips Garment Steamer | Steam & Go - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow the steamer is ready to use switch. It on and you have to wait for at least 30 to 45 6 secondsMoreNow the steamer is ready to use switch. It on and you have to wait for at least 30 to 45 6 seconds for the steam to generate. You can hear the hiss of the sea.
How does steam generator iron work?
Instead of storing water in the iron itself, steam generator irons store water in the base unit, where it's heated by the boiler which heats the water and converts it into high-pressure steam. The pressurized steam effortlessly removes wrinkles.
Can you use ironing water in a steam generator iron?
Bottled and Other Water You should be especially careful with "ironing water" that you can buy in the supermarket. This is perfumed water that will often say on the bottle "not suitable for steam generator irons", although we wouldn't advise using it with a normal iron either.
What is the difference between steam iron and steam generator iron?
A steam iron has a water tank built-in whereas a steam generator iron has its water tank separate and therefore has a much larger water capacity. The steam generator also produces much higher steam output. All these factors mean that the steam generator iron can cut through wrinkles much faster.
Which is the best Philips steam generator iron?
Philips PerfectCare Elite Plus GC9682/86: Arguably the best steam generator iron on the market. For anyone faced with a large volume of laundry on a regular basis, this stylish, albeit extraordinarily pricey, steam generator is unequivocally the best on the market.
How does a steam station work?
A steam power plant consists of a boiler, steam turbine and generator, and other auxiliaries. The boiler generates steam at high pressure and high temperature. The steam turbine converts the heat energy of steam into mechanical energy. The generator then converts the mechanical energy into electric power.
How do I Decalcify Philips steamer?
With regular use, your garment steamer should be descaled every 2 weeks.Fill the water tank and plug in the steamer near a sink.Point the steamer head into the sink. Press and hold the AUTO CLEAN button for 2 seconds.Wait 2 minutes until the steamer shuts off and the AUTO CLEAN light goes out.
How do you unclog an iron spray?
0:212:07Housekeeping Tips : How Do I Clean a Clogged Steam Iron? - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext. After you filled it a quarter of the way with the vinegar you want to turn it on the mediumMoreNext. After you filled it a quarter of the way with the vinegar you want to turn it on the medium setting. Which on this iron. Looks like it's between number five and number four.
How long should a steam generator iron last?
Philips steam generator iron-AIBU to expect it to last more than 4 years.
Why do you descale a Philips steam iron?
Descaling your Philips steam iron, steam generator iron or garment steamer helps keep the appliance in optimal condition.
How to clean Philips generator iron?
1) Fill the water tank halfway with warm water and shake it carefully. 2) Empty it and rinse well with fresh water (do not use detergent).
What is Philips steam generator?
Philips Steam Generators produces a continuous and even amount of powerful steam. The powerful and continuous steam tackles even tough creases, and thicker fabrics are smoothed out with ease and speed.
What is a large detachable water tank?
Large detachable water tank. for easy refilling. The detachable water tank allows you to easily refill anytime without stopping the appliance. It has a large filling hole so you can simply fill the water tank under the tap.
Can you use Philips steam generator with tap water?
Your Philips steam generator iron has been designed to be used with tap water. However, if you live in an area with hard water, fast scale build-up may occur. Therefore, to prolong the lifespan of your iron or steamer it is recommended to use distilled or demineralised water (50% demineralised water mixed with tap water could be used too). ...
Can you use perfume in a tumble dryer?
Please do not use perfumed water, water from the tumble dryer, vinegar, starch, descaling agents, ironing aids, chemically descaled water or other chemicals as they may cause water spitting, brown staining or damage to your steam iron. To perfume your clothes we recommend you choosing one of the following options:
Can you iron silk without dial?
Thanks to OptimalTEMP, no dial or settings are needed. Iron everything from jeans to silk without adjusting the temperature. So there’s no more pre-sorting the laundry, or waiting for the iron to heat up and cool down. You're ready for any fabric, any time.
What happens if you don't use easy decalc?
If you do not use the EASY DE-CALC function regularly, scale particles may build up in the soleplate and brown stains may come out of the soleplate during ironing. In this situation, you need to descale the soleplate by following the procedure below. We advise you to repeat the procedure twice to better clean the soleplate.
What is Dynamiq sensor?
The intelligent DynamiQ sensor inside your iron knows exactly when and how your iron is moving. When you activate the intelligent automatic steam mode, the DynamiQ sensor will start recognizing the movements of your iron and will enable your iron to release the right amount of steam automatically without you having to press the steam trigger. This will help you to get great results faster and easier.
What setting to use for faster ironing?
For faster ironing and a higher amount of steam, you can use the MAX setting .
How to exit steam mode?
To exit the intelligent automatic steam mode, press the intelligent automatic steam button. The intelligent automatic steam light turns off. You need to press the steam trigger to continue your ironing.
When to use easy decalc?
It is very important to use the EASY DE-CALC function as soon as the EASY DE-CALC light starts to flash and the appliance beeps continuously.
When to stop moving iron?
Stop moving the iron when no more water comes out or when steam starts coming out.
When does steam come out on an iron?
Note: in intelligent automatic steam mode, steam comes out automatically when you move the iron and stops when you stop moving the iron (Fig. 7). You can still press the steam trigger in this mode to activate the steam when the iron is not moving.
Did you know that steam generators can help you save up to 30 minutes a week compared to steam irons**?
Compared to a steam iron, a steam generator iron can produce up to 2 times more continuous steam that speeds up your ironing.
Is ironing faster with steam?
Ironing has become easier and faster thanks to our powerful continuous steam generated by ProVelocity steam engine.
Can you descale a PerfectCare Compact?
Now it’s easy to keep your PerfectCare Compact going strong – thanks to our Smart Calc-Clean system. You can easily descale this powerful steam generator iron with the push of a button. The iron does the rest for you! Your iron will even remind you when it’s time to.
How long does it take for a Calc Clean to beep?
After 1 to 3 months of use, the Calc-Clean light starts flashing and the appliance starts beeping to indicate that you have to perform the Calc-Clean process. You can continue steam ironing for 1 hour while the Calc-Clean light flashes and the appliance beeps. After 1 hour, the steam function is automatically disabled.
Why do you descale irons?
Performing the descaling process regularly helps to prolong the lifetime of the appliance and optimizes ironing performance.
How to use Quick Calc Release on a steam generator?
Quick Calc Release. Make sure your iron has cooled down before using Quick Calc Release. Remove the detachable water tank, hold the steam generator with both hands and shake well. Turn the generator on its side with the Calc-clean rinsing cap facing upwards and remove the cap.
What happens if you don't descale your steam iron?
Without regular descaling, you will find that scale is pushed out of your steam generator iron in the form of white/brown stains and that the steam output is compromised. Be sure to descale as part of your ironing routine to maximize ...
When to perform descaling procedure?
Perform the descaling procedure as soon as the Calc-Clean light starts to flash and the appliance beeps continuously. *
When to replace anti-calc cartridge?
Replace the ANTI-CALC cartridge once the descaling light u001fflashes and the appliance beeps.
Where to place iron in Calc Clean Container?
Place the iron on the Calc Clean Container on an even, stable surface.
What to do if your steam generator iron is still white?
When there are still white flakes or brown stains on your garment after descaling the iron, we recommend repeating the descaling routine: by doing this, you will be rinsing your iron again and all calc residues will be flushed out of it. My steam generator iron is not steaming after descaling.
Why do you descale a steam generator?
Regular descaling prevents problems such as brown stains on your clothes, brown water, and leaking. Cleaning your steam generator regularly keeps steam output at its highest and extends the lifetime of your iron.
What kind of water do you use for a Philips steam generator?
We recommend using tap or demineralized water for all Philips steam generators and irons. Demineralized water is the best option to prevent limescale build up in your iron.
How to find the name of a steam generator?
It is very easy to find the name if your steam generator iron. Just look at the right or left side of your steam generator iron. The name of your product is written there such as PerfectCare Elite, PerfectCare Performer etc.
How long does it take to clean a steam generator?
NOTE: For some models, the calc-clean button is in front of the iron handle. The iron will start to clean itself, this will take about 2 minutes. When your steam generator stops beeping and the CALC CLEAN light stops flashing, the cleaning process is complete. Use a clean towel to dry the soleplate.
How long does it take for a descaler to cool?
For best results, you can do this as part of your regular ironing routine. Unplug and let it cool completely — at least 2 hours. Place the steam generator at the edge of a table or sink. Hold a cup (at least 350 ml) under the EASY DE-CALC knob. Remove the knob.
How much distilled water to pour into a decalc?
Hold the appliance in the position that EASY DE-CALC opening is facing up and pour 500ml distilled water into the opening. (NOTE: for PerfectCare Elite (GC96xx) and PerfectCare Elite Plus (GC96xx), pour 900ml distilled water.)
