How to Make Japanese Book Binding:
- Individually fold 3 or 4 pieces of paper (8 1/2-by-11 inches) in quarters and cut the folded edge along the top.
- Cut 2 book covers (4.5-by-5.75 inches) out of paperboard. If covers are from a cereal box or printed paperboard, cut 2 more pieces of paperboard or decorative paper at ...
- Cut decorations out of fabric and glue to front of cover.
- Let embellishments dry. You can also try embroidering onto the paper covers.
How do you make a Japanese book binding?
How to Make Japanese Book Binding: 1 Individually fold 3 or 4 pieces of paper (8 1/2-by-11 inches) in quarters and cut the folded edge along the top. 2 Cut 2 book covers (4.5-by-5.75 inches) out of paperboard. If covers are from a cereal box or printed paperboard, cut... 3 Cut decorations out of fabric and glue to front of cover. More ...
What is a Japanese stab binding book?
Instead, the papers are merely gathered and the holes for binding are ‘stabbed’ into the paper. You can vary the width of your book spine. Best of all, no glue required! Compared to Coptic Binding and Case Binding, a Japanese Stab Binding book project takes relatively less time.
How do you bind a single page book?
1 Method 1 of 4: Binding Your Book with Tape. Fold your pages in half. ... 2 Method 2 of 4: Using Ribbon to Bind Your Book. Ensure your pages have at least 1 inch (2.5 cm) of margin on the left-hand side. ... 3 Method 3 of 4: Sewing Your Book’s Binding. Fold your pages in half. ... 4 Method 4 of 4: Mastering Single Sheet Binding. ...
What is the best bookbinding method for kids?
As a final touch to really press everything together and create a flat, neat book, squish your book between a smooth surface with another flat, evenly weighted object – a stack of three or four large books would suffice! Detchoso is a great Japanese bookbinding method for kids to play around with!
What is Japanese stitch binding?
Japanese Side stitch is a simple non-adhesive binding that is an excellent intro to bookbinding. Also known as Stab Binding, this traditional binding was practiced in China, Japan, and Korea. It has the advantage of being very cheap, as thread and paper are the only materials needed.
How many holes are in Japanese stab binding?
four holesThe foundational Japanese version of stab binding is called Yotsume Toji, which roughly translates to “four holes.” This is also the basic Chinese version, while the Korean standard has five holes (a more favourable number in Korean culture).
How much thread do I need for Japanese stab binding?
Make sure to keep around 2 inches of thread at all times inside your book so be careful when you pull the thread (you can use a small piece of tape to keep the thread inside if needed).
What is stab binding?
The Stab Binding stitch is a decorative stitch with lots of variations. You'll also often see many examples of Japanese Stab Binding, of which there are at least four distinct patterns.
How do you bind a 3 hole punched book?
3-Hole Binding Sewing Method/Technique:Start at the inside center hole. Move through the hole until only 1-1/2″ of thread is left inside the book. ... Re-enter through the top hole, pulling taught. ... Skip the center hole and move through the bottom hole. ... Re-enter through the center hole once more.
What is perfect bind?
What is perfect binding? Perfect binding is a process, commonly used by printers and bookmakers, where groups of pages are bound together using adhesive to create a clean, crisp and professional printed product.
What is Japanese bookbinding called?
seihonThe word in Japanese for bookbinding is seihon.
Can you use embroidery thread for bookbinding?
Honestly, you can use almost any type of thread for bookbinding. They work the same way. The only difference is the strength. If you are attempting bookbinding as a hobby, just grab any thread you have at home, wax it and get started.
How thick should book binding thread be?
You'll notice lots of 3-ply thread. This is because 3-ply is a great all-around size for many bindings....Common thread sizes used in bookbinding.GaugePlyDiameter (mm)3530.403030.452530.501830.601 more row
What are the types of book binding?
10 Book Binding Methods You Need To KnowSaddle stitch binding. When there's brevity to be bound, there's saddle-stitching to be found. ... PUR binding. ... Hardcover or case binding. ... Singer sewn binding. ... Section sewn binding. ... Coptic stitch binding. ... Wiro, comb or spiral binding. ... Interscrew binding.More items...
How do you do Coptic stitch?
0:3311:54DIY Coptic Stitch Bookbinding Tutorial | Sea Lemon - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart with the bottom cover in first signature make sure to sew on the others in the order you stackMoreStart with the bottom cover in first signature make sure to sew on the others in the order you stack them in like this start from the inside. And go down and up through the cover hole.
How do you make a stab binding book?
0:284:554-Hole Japanese Bookbinding Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst i'm going to make a template for the binding holes take one of the inside pages and make aMoreFirst i'm going to make a template for the binding holes take one of the inside pages and make a line one inch from the spine. Edge then fold the paper in half three. Times now unfold the paper.
How do you do Japanese stab binding?
3:4813:16More Japanese Bookbinding Tutorials (finally!) - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust like the japanese four hole binding continue to the next hole on the side. And then loop aroundMoreJust like the japanese four hole binding continue to the next hole on the side. And then loop around the side back through that same hole. Now go through the corner. Making a diagonal.
Where did stab binding originate?
AsiaAbout Stab Binding Stab binding is a traditional binding style that originated in Asia and is often called Japanese Stab Binding (JSB).
What are the types of book binding?
10 Book Binding Methods You Need To KnowSaddle stitch binding. When there's brevity to be bound, there's saddle-stitching to be found. ... PUR binding. ... Hardcover or case binding. ... Singer sewn binding. ... Section sewn binding. ... Coptic stitch binding. ... Wiro, comb or spiral binding. ... Interscrew binding.More items...
How do you do Coptic stitch?
0:3311:54DIY Coptic Stitch Bookbinding Tutorial | Sea Lemon - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart with the bottom cover in first signature make sure to sew on the others in the order you stackMoreStart with the bottom cover in first signature make sure to sew on the others in the order you stack them in like this start from the inside. And go down and up through the cover hole.
What is the Detchoso method of bookbinding?
Glue would also be painted over the outer edge of the first and last pages, and then wrapped in a final, single piece of paper that would act as a cover. The Detchoso bookbinding method is quite simple and only requires a small number of items to begin. Paper for your pages. Bookbinding glue.
What is an orihon book?
Orihon/Folding Books. Orihon is an evolved version to Kansubon. After gluing (by using the above method), rather than being rolled, the single sheet of paper is folded into a sort of paper accordion. Occasionally, covers will be glued to the first and last page.
How is Detchoso similar to modern books?
These should sound quite familiar! Detchoso is very similar to how modern books are printed, as in stacks of folded paper are glued together and bound within a cover. Although modern bookbinders use machines to do all the work nowadays, the process is remarkably similar.
What is Fukuro Toji?
Fukuro toji is an especially unique method of Japanese bookbinding. Instead of sewing along the folded edge of the paper, bookbinders would sew the loose edges together to create the spine. Although this method did cut down on how many writable pages were available, this method also allowed thinner paper to be used.
How long to glue a stack of pages?
Depending on how many pages you are working with, you may want to operate in small batches over a number of hours or days; this makes the glued stacks more manageable as you progress.
What is a scroll in Japan?
Kansubon/Scrolls. Scrolls have been a means of recording and preserving the written word in many cultures, and Japan was no different. Uniquely, though, in Japan, a Kansubon was not made from a single piece of paper, but rather a large number of pages glued together. These pages would be laid out horizontally and then glued together along ...
Is Kansubon practiced?
Outside of hobbyists, Kansubon is rarely practiced today. Kansubon Tutorial. Creating a Kansubon scroll takes up quite a bit of floor space, so try and clear a surface that won’t be disturbed by anyone during your project. A table or an empty room, where no kids or pets will be messing around, are two viable ideas.
What is a Japanese stab binding?
The Japanese Stab Binding produces a book with a spine that does not allow the book to be laid flat. The book cover is made using a decorative piece of colored paper. There is not need to fold papers to create separate book signatures. Instead, the papers are merely gathered and the holes for binding are ‘stabbed’ into the paper.
How to make a book spine?
Prepare thread that is about 7 times the length of your book spine. Wax your thread and put it through your needle. Grab the top half of your text block and put the needle through the 2nd hole (from the left) Leave a length of thread at the end (don’t pull the entire thread through) Place the book back together.
Where do you bring your needle to end the sewing process?
To end the sewing process, bring your needle to the 2nd hole (where you started from). This time, instead of going all the way through the entire book, bring your needle to the page where the beginning of the thread is.
How to make a book cover with A4 paper?
Cut your A4 papers into 2 equal halves. Do the same for your decorative paper – this will be used as your book cover. Gather the papers and align them so that they are straight. Place one decorative paper on each end of the text block. Clip your text block together to prevent the pages from moving. II.
Why do you clip text blocks together?
Clip your text block together to prevent the pages from moving.
Can Japanese binding be modified?
Japanese Stab Binding book projects can be modified to produce books with different feels.
What is a Japanese stab binding?
Characteristics: Exposed spine*, single sheets, will not lay flat, sewing patterns take center stage
Other Fun Stab Binding Patterns
These four patterns are not the *only* ones out there, but they’re the best place to start if you’re just learning the stab binding method. Once the basics are mastered, it’s time to explore other examples or create your own.
Resources
If you are new to bookbinding and looking for the best place to start, read my New Bookbinder Guide.
How to tie ribbon binding?
Thread the ribbon in and out of each hole. Make sure you don’t completely pull the ribbon through the first hole, since you will to tie the ribbon binding closed. If your ribbon isn’t long enough, remove it and cut a longer piece. [13]
How to make a signature on a book?
1. Fold your pages in half. Make sure the fold is crisp by using a bone folder or running the top of your nail over it and smoothing it down. You can choose to fold pages individually or fold multiple pages together. If you have too many pages to fold crisply, try creating packets of signatures.
How much margin do you need for a book?
Make sure you have 1⁄2 inch (1.3 cm) of margin, if your pages are printed. Any words printed within 1⁄2 inch (1.3 cm) of the crease will become part of the binding and therefore be impossible to read. [3]
How many holes do you need for a bookbinding crease?
Divide your measurement by 6. This bookbinding method requires 5 holes at the crease. They should be equally spread apart, but the spacing between the dots will depend on how large your paper is.
How to measure length of book?
Use a ruler to measure how long the book is. If you know your page measurements, you don’t have to measure. If you don’t, or if you’re not using a standard page size, make sure you measure precisely.
How many holes do you punch in a ribbon?
Punch holes every 1⁄4 inch (0.64 cm) along the line. Make sure your holes are on the line. You’ll be threading the ribbon through these holes later on. [11]
Can you use cardboard to make a book cover?
Community Answer. Yes, cardboard is definitely the best material to use for a hardcover book. You can either print or draw your cover content on a piece of paper and then glue it to the cardboard, or you can glue on blank paper. You can also use fabric or leather to cover the cardboard.
Kansubon/Scrolls
Orihon/Folding Books
- Orihon is an evolved version to Kansubon. After gluing (by using the above method), rather than being rolled, the single sheet of paper is folded into a sort of paper accordion. Occasionally, covers will be glued to the first and last page. Cleverly, Orihon works so that the book does not have to be completely unfolded to read a page. Orihon Tutorial Using the same method to creat…
Detchoso/Glued Books
- These should sound quite familiar! Detchoso is very similar to how modern books are printed, as in stacks of folded paper are glued together and bound within a cover. Although modern bookbinders use machines to do all the work nowadays, the process is remarkably similar. Detchoso were made from numerous stacks of folded paper, which were themselves made by f…
Fukuro Toji/Bound-Pocket Book
- Fukuro toji is an especially unique method of Japanese bookbinding. Instead of sewing along the folded edge of the paper, bookbinders would sew the loose edges together to create the spine. Although this method did cut down on how many writable pages were available, this method also allowed thinner paper to be used. As a result, it opened up the ch...
Tetsuyoso/Sewn Books
- Tetsuyoso books are those that are sewn together with the stab binding method we’ve discussed! Traditionally, Tetsuyoso methods did not include covers to protect or reinforce the book – but modern hobby-crafters have adapted stab binding to sewing covers in as well. Using the same page crafting method as Detchyoso, bookbinders would create all the pages they need. However…