BSNw()1QRQ~~60_57.JPG?set_id=8800005007)
How to Put Glitter on a Styrofoam Ball
- Place a large piece of wax paper on a flat, solid work surface to protect your work area from glue drips and to keep the glitter in one ...
- Pour glitter at the center of the wax paper.
- If you are decorating a small ball, poke a toothpick halfway into the center of it; use a small wooden dowel, which can be purchased at hobby and ...
How do you decorate a styrofoam ball with decoupage?
Allow the glue to dry. Cover the Styrofoam ball, and the pieces of paper decorating it, with a second coat of decoupage glue. Allow the glue to dry. Apply a third coat, if desired. Add glitter, sequins or other embellishments to the final coat of glue and allow the glue to dry. Spray the finished Styrofoam ball with an acrylic spray-on sealant.
How do you make a styrofoam ball out of wire?
Insert the two ends of the wire into the glue-filled hole to create a hanger. Allow the glue to dry. If you wish to paint the Styrofoam ball, paint it with acrylic craft paint after the last coat of decoupage glue has dried and before you apply the sealant.
How big are styrofoam craft balls?
240 Pack Styrofoam Balls -Craft Foam Balls -Foam Craft Balls -Foam Balls For Arts and Crafts, DIY Craft For Home, School Craft Project -240 Bulk Styrofoam Balls, 4 sizes .8’’, 1.2’’, 1.6’’, 2’’ Inches . . . Only 7 left in stock - order soon.
How do you make a sewer out of Styrofoam?
Insert one end of a wooden skewer into the bottom of a Styrofoam ball. Insert the opposite end of the sewer into a Styrofoam block, piece of clay or pot of soil so the skewer stands up straight and supports the ball.
How do you glitter Styrofoam balls?
15:5920:04How to Make Glitter Styrofoam Ball for you Paper Flower Fluffy CenterYouTubeStart of suggested clipEnd of suggested clipJust ed and alone so it's done now we can get our Styrofoam ball with glitter on it and on the edge.MoreJust ed and alone so it's done now we can get our Styrofoam ball with glitter on it and on the edge. We can start gluing this one. And be careful because it's hot just make it sure you wrap it.
How do you seal glitter on Styrofoam?
You can definitely seal glitter with Mod Podge, provided Mod Podge was used to apply the glitter in the first place. You can also do a second layer to seal the glittered surface. Use mod podge with a gloss finish to achieve a shiny and durable finish.
How do you paint glitter on Styrofoam?
3:126:54How to Paint & Glitter Styrofoam Letters - Sweet 16 DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can use a spongy brush and just spread the glue out all over your letter. There's really no needMoreYou can use a spongy brush and just spread the glue out all over your letter. There's really no need to glitter. The back or the sides of your name you really just need to glitter the front of it. So.
How do you decorate a Styrofoam ball?
2:184:22How to Decorate Styrofoam Balls : Simple Decorating Tips - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe are going to place some of the green flowers with the glue gun. So you're gonna glue into theMoreWe are going to place some of the green flowers with the glue gun. So you're gonna glue into the tissue paper. And you're gonna place the leaves just right is the simplest.
What keeps glitter from coming off?
0:402:15How to Keep Glitter from Shedding - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen comes my number one trick for making sure glitter doesn't shed Mod Podge ultra. This stuff isMoreThen comes my number one trick for making sure glitter doesn't shed Mod Podge ultra. This stuff is fantastic. For sealing in glitter. So that it does not shed at all.
What is the best sealer for glitter?
3.1 The Best Glitter Sealer Spray: KRYLON Triple-Thick Crystal Glaze Spray.3.2 The Best Permanent Fabric Glitter Spray: TULIP Glitter Spray And Sealant.3.3 Fabric Glue As A Glitter Sealant: ALEENE'S OK to Wash-It Fabric Glue.3.4 For the Best Glitter Mod Podge Project: MOD PODGE Gloss.More items...
How do you make glitter balls?
0:5518:483 DIY Dollar Tree Glitter Ball Ornament Ideas - YouTubeYouTubeStart of suggested clipEnd of suggested clipYour glitter. And I'm gonna put a very generous amount of glue into the bottom of my plastic ballMoreYour glitter. And I'm gonna put a very generous amount of glue into the bottom of my plastic ball not one thing that's cool about this glue is it is kid safe.
Can you paint Styrofoam balls?
Water based paints or acrylic craft paints are the best to use on Styrofoam. Water based paints, specifically poster paints, work well with younger kids as they can get a really good and thick coverage of paint on the polystyrene shape.
Can you use Mod Podge on Styrofoam?
Wondering if you can Mod Podge on Styrofoam? The answer is yes, you can!
What can I use to decorate Styrofoam?
For most Styrofoam crafts, use acrylic paint and choose foam balls that have a smooth surface and are less porous. If you plan to wrap yarn around the ball, bumpier polystyrene balls provide more traction. Never use solvent-based spray paints as they will dissolve the foam.
How do you decorate a Styrofoam ball for Christmas?
0:205:22How to Make Five Ornaments in Five Minutes - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what I've gone ahead and done is strung a couple flowers onto a pearly red straight pin and thenMoreSo what I've gone ahead and done is strung a couple flowers onto a pearly red straight pin and then you're just going to push those into your Styrofoam ball the next ornament is covered in fabric.
What can I do with Styrofoam balls?
Styrofoam balls are fun to use in craft projects. You can paint them, push pipe cleaners into them, glue eyes and felt to them, turn them into robots, the list goes on. We have plenty of styrofoam ball crafts and ideas the kids will love!
How do you seal glitter without losing sparkle?
If you want to stick and seal glitter onto fabric, we suggest using Aleene's permanent fabric glue. If you are adding glitter to an old pair of shoes, glass, wood, or almost any other surface, we suggest using mod podge. Mod podge is highly effective and keeps your glitter firmly in place.
Can you put Mod Podge over glitter?
If you want the glitter layer to be really opaque (like me) then apply another layer of mod podge on top of the first one and sprinkle glitter over it again and let it dry. Once the second layer has dried apply another layer of mod podge over the glitter and let it dry.
How do you seal glitter without Modge podge?
If you don't have Mod Podge, you could also use regular white school glue, though school glue often chips off easily over time. Fun ideas of things you can add glitter to: plates, mugs, containers, candles, fabric flowers, glasses frames, cell phone covers, wood, and notebooks or folders.
What is the best Mod Podge for glitter?
You can apply Sparkle Mod Podge just as you would any other Mod Podge formula; however, I will say that I typically use Mod Podge Gloss to adhere paper and then top coat with Sparkle Mod Podge. This is because there are glitter particles in this formula that can prevent paper from being completely smooth.
Step 1: Prepare the Styrofoam Ball
Insert one end of a wooden skewer into the bottom of a Styrofoam ball. Insert the opposite end of the sewer into a Styrofoam block, piece of clay or pot of soil so the skewer stands up straight and supports the ball.
Step 2: Cut Out Pieces of Christmas Decoupage Paper
Cut out pieces of paper you'll use decorate the Styrofoam ball. For the least amount of wrinkling, cut the paper into pieces or strips, no more than 1 to 2 inches wide.
Step 3: Cover the Ball With Glue
Cover the Styrofoam ball with decoupage glue using a paint brush. Decoupage glue can be found at most craft stores.
Step 4: Apply the Paper Pieces
Press the pieces of paper into the decoupage glue, creating whatever design or pattern you wish. Because you'll be able to adjust the pieces only slightly once they're applied to the glue, plan the design beforehand in your head or on a sheet of paper. Allow the glue to dry.
Step 5: Add a Second Coat
Cover the Styrofoam ball, and the pieces of paper decorating it, with a second coat of decoupage glue. Allow the glue to dry. Apply a third coat, if desired.
Step 6: Decorate With Bling
Add glitter, sequins or other embellishments to the final coat of glue and allow the glue to dry.
Step 7: Spray on the Sealant
Spray the finished Styrofoam ball with an acrylic spray-on sealant. Spray-on sealants are available at most craft stores. Allow the sealant to dry.
Supplies for Glitter Ball Ornaments
Styrofoam balls in varying sizes (I used 2 inch , 1.5 inch, and 1 inch, balls)
How to Make the Ornaments
1. Apply an even layer of glitter glue around the ball with your brush. Then drop it in the glitter shaker and sprinkle in a generous amount of glitter.
