How to Adjust K-Rain Sprinkler Heads
- 1. Rotate the sprinkler turret at the top of the riser to the right until you hear a click. Then rotate the turret back to the left until you hear another click. ...
- 2. Place the key into the key slot on the top of the sprinkler head. ...
- 3. Locate the arrow on the top outside edge of the sprinkler head. ...
How do you turn a K rain sprinkler head?
K-Rain sprinkler heads can turn between 40 and 360 degrees. By default, K-Rain sprinklers spin all the way around. To set a new stop position, push the K-key into the arc selection slot in the center of the sprinkler top. Turn the key until the slot's arrow points to the correct stopping point, noted on the sprinkler in degrees.
How do you adjust the nozzle on a sprinkler head?
To change how far around the sprinkler head turns, turn the top nozzle section, called the turret, to the right until it stops. Turn it all the way to the left, which should place the nozzle at its starting position. With the K-key, turn the arc selection slot and arrow to the new setting.
How do you adjust the spray distance on a sprinkler?
Ideally, the spray from one sprinkler head should overlap the spray area of all adjacent sprinkler heads. The spray should travel far enough to touch the adjacent sprinkler heads. To change the nozzle and adjust the spray distance, remove the nozzle retention screw with the K-key.
What is a K key on a sprinkler head?
K-Rain’s unique K Key allows you to adjust sprinkler heads and rotary nozzles as well as acts as a handle for placing the spray head back into its holder. Rotary Nozzle Adjustment Tool. K-Rain makes it easy to save water and time with their lawn irrigation products.
How do you adjust K sprinkler heads?
1:082:23K-Rain® K1 Gear Drive Rotor Sprinkler - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd minus arrows while holding the top of the nozzle turret with your fingers. Turn the slot untilMoreAnd minus arrows while holding the top of the nozzle turret with your fingers. Turn the slot until the gray spray pattern arrow in the center points to your desired.
How do you adjust rain sprinkler heads?
1:051:59How To Adjust A Rain Bird 5000 Series Rotor - YouTubeYouTubeStart of suggested clipEnd of suggested clipStop insert the tool into the arc adjustment hole until it seats then turn the tool in theMoreStop insert the tool into the arc adjustment hole until it seats then turn the tool in the appropriate. Direction clockwise to increase the arc. And counterclockwise to decrease.
How do I adjust K rain Pro Plus?
1:434:09The K-Rain 11003 ProPlus RCW Rotor - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse the k-ring. Key to pull up the riser. This is the arc adjustment slot use the k-ring key or aMoreUse the k-ring. Key to pull up the riser. This is the arc adjustment slot use the k-ring key or a small flat head screwdriver to change the pattern.
How do you adjust a Rainbird sprinkler left stop?
2:173:28Rain Bird 5000 - Setting the Left Stop w/ Slip Clutch - YouTubeYouTubeStart of suggested clipEnd of suggested clipStop is just with the plus/minus slot here and your handi Rainbird adjustment tool just either go inMoreStop is just with the plus/minus slot here and your handi Rainbird adjustment tool just either go in the give it a turn in the minus direction.
What temperature does a red sprinkler head go off?
155° FThe liquid in the sprinkler head comes in a variety of colors, which indicates the temperature required to activate the head: Orange – 135° F. Red – 155° F. Yellow – 174° F.
Why is my sprinkler head not rotating?
The most common reason for a sprinkler to stop rotating is the accumulation of debris in the filter. This video will teach you how to clean the filter on your rotors. Hunter rotary sprinklers operate on a “gear drive” system.
How do you adjust a k5 gear sprinkler?
1:062:07Use up to 30% less water with the K5 Select - YouTubeYouTubeStart of suggested clipEnd of suggested clipSelect your watering pattern and nozzle. When the sprinkler is set to 90 degrees quarter circle turnMoreSelect your watering pattern and nozzle. When the sprinkler is set to 90 degrees quarter circle turn the nozzle selector to nozzle number. 1 for 180 degrees use nozzle number 2.
What does the screw on top of the sprinkler head do?
This is even more common when garden owners have two different sprinkler heads watering the same section of lawn. Luckily, fixing these distance and angle errors is very straightforward as most sprinkler manufacturers have an adjustment screw that stops the water coming out from a pop-up head.
How do I adjust the water pressure on my sprinkler system?
0:241:00Rain Bird Valves: Adjusting the Flow Control - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo increase the flow turn the stem counterclockwise. In an emergency you can turn off the sprinklersMoreTo increase the flow turn the stem counterclockwise. In an emergency you can turn off the sprinklers from any particular valve by turning the valves flow control stem clockwise.
How to change the direction of the sprinkler head?
To change how far around the sprinkler head turns, turn the top nozzle section, called the turret, to the right until it stops. Turn it all the way to the left, which should place the nozzle at its starting position. With the K-key, turn the arc selection slot and arrow to the new setting.
How many degrees does a K-Rain sprinkler turn?
It's important to understand that changing where the spray starts doesn't restrict it to a certain area. K-Rain sprinkler heads can turn between 40 and 360 degrees. By default, K-Rain sprinklers spin all the way around.
How does K Rain sprinkler work?
K-Rain sprinkler heads have interchangeable nozzles shaped with different angles to alter the distance of the spray. Ideally, the spray from one sprinkler head should overlap the spray area of all adjacent sprinkler heads. The spray should travel far enough to touch the adjacent sprinkler heads.
How to turn a sprinkler head 360 degrees?
You should do this only when you don't want to waste water on a certain area, such as the side of a building. To pull the sprinkler head out of the ground, push the K-key into the keyhole on the top of the head.
How to set a stop position on a sprinkler?
To set a new stop position, push the K-key into the arc selection slot in the center of the sprinkler top. Turn the key until the slot's arrow points to the correct stopping point, noted on the sprinkler in degrees. When setting the spray pattern, start at the lowest setting and turn the key clockwise to your desired setting.
How to rotate a sprinkler head?
This sets your left start position where the sprinkler begins its rotation. Place the key into the key slot on the top of the sprinkler head.
How far can a K-Rain sprinkler spray?
Spray distance ranges from 15 to 48 feet, depending on the sprinkler model. Arc ranges from 30 to 360 degrees. K-Rain sprinkler heads come preset at 90 degrees. In order to adjust the sprinkler, you need the key that came with your model.
Where is the arrow on a sprinkler head?
Locate the arrow on the top outside edge of the sprinkler head. The arrow points to the left start position. Hold the lower half of the riser, and rotate the riser until the arrow on the top of the sprinkler head points in the direction you want the spray to start. Let go of the riser.
What screwdriver to use to adjust arc?
You can also use a flat-head screw driver to adjust the arc and distance screws.
