How to Adjust K-Rain Sprinkler Heads
- 1. Rotate the sprinkler turret at the top of the riser to the right until you hear a click. Then rotate the turret back to the left until you hear another click. ...
- 2. Place the key into the key slot on the top of the sprinkler head. ...
- 3. Locate the arrow on the top outside edge of the sprinkler head. ...
How do you turn a K rain sprinkler head?
K-Rain sprinkler heads can turn between 40 and 360 degrees. By default, K-Rain sprinklers spin all the way around. To set a new stop position, push the K-key into the arc selection slot in the center of the sprinkler top. Turn the key until the slot's arrow points to the correct stopping point, noted on the sprinkler in degrees.
How do I adjust my K-rain sprinkler system?
K-Rain sprinkler systems come with simple adjustment methods to ensure your lawn gets the right amount of coverage without wasting water. You can adjust each sprinkler head so all zones in your yard get water. Many adjustments call for K-Rain's K-key tool, but you can use a small flat-head screwdriver if you can't find the tool.
How do you change where the spray starts on a sprinkler?
It's important to understand that changing where the spray starts doesn't restrict it to a certain area. K-Rain sprinkler heads can turn between 40 and 360 degrees. By default, K-Rain sprinklers spin all the way around. To set a new stop position, push the K-key into the arc selection slot in the center of the sprinkler top.
How do you adjust the stop position on a sprinkler system?
To set a new stop position, push the K-key into the arc selection slot in the center of the sprinkler top. Turn the key until the slot's arrow points to the correct stopping point, noted on the sprinkler in degrees. When setting the spray pattern, start at the lowest setting and turn the key clockwise to your desired setting.
How do you adjust rain pro sprinklers?
1:202:19K-Rain® K2 Pro Pop-Up Sprinkler - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn only the lower half of the riser to the left until the nozzle arrow points to your desired.MoreTurn only the lower half of the riser to the left until the nozzle arrow points to your desired. Left start position then carefully and slowly release.
How do you adjust K rain rotating sprinkler heads?
0:071:34K-Rain® K-Sprays™: How to Set and Adjust - YouTubeYouTubeStart of suggested clipEnd of suggested clipArea turn the ridge top of the nozzle clockwise to increase the area or counterclockwise to decreaseMoreArea turn the ridge top of the nozzle clockwise to increase the area or counterclockwise to decrease the area.
How do you adjust a Raintree sprinkler head?
1:051:59How To Adjust A Rain Bird 5000 Series Rotor - YouTubeYouTubeStart of suggested clipEnd of suggested clipStop insert the tool into the arc adjustment hole until it seats then turn the tool in theMoreStop insert the tool into the arc adjustment hole until it seats then turn the tool in the appropriate. Direction clockwise to increase the arc. And counterclockwise to decrease.
How do I adjust my irrigation sprayer?
0:391:37Spray Sprinkler - How to Adjust the Throw Pattern - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the nozzle is in place adjust the spray sprinkler's alignment by twisting the stem eitherMoreOnce the nozzle is in place adjust the spray sprinkler's alignment by twisting the stem either clockwise or counterclockwise.
How do you adjust spray distance?
0:040:36Spray Sprinkler - How to Adjust the Throw Distance - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing a small screwdriver adjust the spray head's throw distance by turning the center screw toMoreUsing a small screwdriver adjust the spray head's throw distance by turning the center screw to reduce the throw distance by up to 25.
How do you adjust the radius on a sprinkler head?
1:413:48Hunter Spray Adjustments and Maintenance - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you need to reduce the radius. Turn the screw clockwise. If. You need to reach a little farther.MoreIf you need to reduce the radius. Turn the screw clockwise. If. You need to reach a little farther. Turn it the opposite direction or counterclockwise.
How do you adjust the radius on a Rainbird sprinkler head?
0:351:50Rain Bird T-Bird Rotors: Arc and Radius Adjustment - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure the sprinkler is rotating clockwise then push down on the nozzle. And while still pushingMoreMake sure the sprinkler is rotating clockwise then push down on the nozzle. And while still pushing down turn it clockwise to the additional degrees desired.
How do you change the direction of a sprinkler head?
How to Adjust Stationary Sprinkler HeadsFind the spray radius adjustment screw at the top of the nozzle.You may need to adjust the water spray in the direction of your lawn.Turn the screw clockwise to lower the water pressure on the spray head if too much water is shooting out.
What does the screw on a sprinkler head do?
This is even more common when garden owners have two different sprinkler heads watering the same section of lawn. Luckily, fixing these distance and angle errors is very straightforward as most sprinkler manufacturers have an adjustment screw that stops the water coming out from a pop-up head.
How do I make my sprinklers higher?
1:223:31How To Replace or Raise a Sprinkler Head the Right Way - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou want to make sure that your sprinkler head is at the right orientation. And perfectly verticalMoreYou want to make sure that your sprinkler head is at the right orientation. And perfectly vertical go ahead and pack the rest of the dirt and mud in that you took out originally.
How do you adjust a k1 sprinkler?
0:502:23K-Rain® K1 Gear Drive Rotor Sprinkler - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere are three easy steps to set the sprinkler. Find left start set left start set right stopMoreThere are three easy steps to set the sprinkler. Find left start set left start set right stop insert the K key partway into the keyhole turn it slightly.
How do you adjust Krain Rotary?
0:041:03K-Rain® Rotary Nozzle Series - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing the adjustment ring adjust the area of coverage of the spray K rain rotary nozzles areMoreUsing the adjustment ring adjust the area of coverage of the spray K rain rotary nozzles are adjustable for 90 degrees to a full 270 degrees using the flow control ring adjust the water flow.
How do you adjust a septic sprinkler head?
0:002:30Adjust aerobic septic sprinkler - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if you don't like where its spraying in the location. You want to kind of move the direction it'sMoreSo if you don't like where its spraying in the location. You want to kind of move the direction it's in so I'm gonna use a butter knife and these are the blades pretty thick.
How many degrees does a K-Rain sprinkler turn?
It's important to understand that changing where the spray starts doesn't restrict it to a certain area. K-Rain sprinkler heads can turn between 40 and 360 degrees. By default, K-Rain sprinklers spin all the way around.
How does K Rain sprinkler work?
K-Rain sprinkler heads have interchangeable nozzles shaped with different angles to alter the distance of the spray. Ideally, the spray from one sprinkler head should overlap the spray area of all adjacent sprinkler heads. The spray should travel far enough to touch the adjacent sprinkler heads.
How to change the direction of the sprinkler head?
To change how far around the sprinkler head turns, turn the top nozzle section, called the turret, to the right until it stops. Turn it all the way to the left, which should place the nozzle at its starting position. With the K-key, turn the arc selection slot and arrow to the new setting.
How to turn a sprinkler head 360 degrees?
You should do this only when you don't want to waste water on a certain area, such as the side of a building. To pull the sprinkler head out of the ground, push the K-key into the keyhole on the top of the head.
How to set a stop position on a sprinkler?
To set a new stop position, push the K-key into the arc selection slot in the center of the sprinkler top. Turn the key until the slot's arrow points to the correct stopping point, noted on the sprinkler in degrees. When setting the spray pattern, start at the lowest setting and turn the key clockwise to your desired setting.
What degree do K-rain rotors come from?
2. All K-rain rotor heads come from the factory preset to 90 degrees if this is the arc (pattern) you need then proceed to step #3.
What are the arcs on a pop up sprayer?
Pop up spray bodies have threaded inserts called “nozzles” installed on top of their pop up risers. These nozzles have preset arcs or patterns such as 90 degrees (1/4 circle), 180 degrees (half circle) and 360 degrees (full circle) that determines the area that the head will cover. Some heads are equipped with variable arc nozzles that will adjust to any arc needed to cover odd shaped areas.
How much water does a 4000 series valve need?
As equipped from the factory a 4000 series valve will have a “Standard Stem and Disc Assembly” that requires 10 gallons per minute (GPM) to operate.
How to check a valve for wear?
Inspect the only moving part inside the valve called the “Stem and Disc Assembly” also check the “Cam” which is the plastic part at the top of the valve the plastic stem tip goes into with internal teeth that advance the disc to the next outlet. Over time the spring inside the plastic stem wears out causing the valve to fail to cycle, the spring may still be strong enough to bounce the stem and disc up and down on the pin at the bottom of the valve however it may not be strong enough to fully engage the teeth on the Cam. Also a worn cam even though it may look fine might have areas that have “flattened out” between the teeth that will cause the valve to stay stuck on one zone.
How to glue a PVC valve?
The best method is to use purple primer and clear glue on the PVC only as the valve itself is not PVC but constructed of ABS plastic and a chemical reaction occurs between the two plastics when glue is applied to ABS that causes the PVC to be pushed back out of the socket. Once pushed into the socket with the valve “right side up” the pipe should be held in for 15 seconds to allow the glue to set. The glue joints should be allowed to set for a minimum of 2 hours before testing the valve.
How many zones can a 4000 series indexing valve be cammed for?
4 outlet 4000 series indexing valves can be Cammed for 2, 3, and 4 zones, 6 outlet 4000 valves can be Cammed for 2, 3, 4, 5 or 6 zones.
