STANDARD MODE To raise or lower the Power-Pole, press and hold either the UP or DOWN button on the key fob. The anchor will only continue to move so long as you press the button. How do you calibrate a micro Power-Pole?
How to control speed of induction motor by pole changing?
For a slip s, the rotor speed of induction motor = Ns (1-s) Therefore speed of induction motor can be varied by pole changing. Since the number of pole pairs can only be changed in steps like from 2 to 4, this scheme provides stepped speed control. Generally, speed control using pole changing method is restricted to two steps.
What is stepped speed control using pole changing?
Since the number of pole pairs can only be changed in steps like from 2 to 4, this scheme provides stepped speed control. Generally, speed control using pole changing method is restricted to two steps. To better understand the basic concept of pole changing; let us consider a magnetic circuit as shown below.
How do I raise or lower my power-pole?
To raise or lower your Power-Pole, press and hold either the UP or DOWN button on the Dash Switch. The anchor will only continue to move as long as you press the button. AUTO MODE (Dash Switch & Standard Key Fob remote control) Double tapping (pressing and releasing 2 times within 1 second) either
How do I set the power-pole on the dash switch?
• Set as a single HPU-Press and hold both UP and DOWN buttons simultaneously. • Set as starboard side HPU-Press and release the UP button. • Set as port side HPU-Press and release the DOWN button. Dash Switch STANDARD MODE To raise or lower your Power-Pole, press and hold either the UP or DOWN button on the Dash Switch.
How to raise power pole?
How to tell if a switch is in sleep mode?
Can a dash switch be used with multiple anchors?
Does the Power Pole anchor come with the Dash Switch?
How do you lower the pressure on a Power-Pole?
STEP 1 Relieve hydraulic tubing pressure Lower the Power-Pole® shallow water anchor down to the ground. Next, manually push the Power-Pole to the closed position, this will release all pressure off the up and down hydraulic lines.
Can you manually lower a Power-Pole?
Set as port side HPU-Press and release the DOWN button. STANDARD MODE To raise or lower your Power-Pole, press and hold either the UP or DOWN button on the Dash Switch. The anchor will only continue to move as long as you press the button.
How do you use a Power-Pole?
1:434:192 Power-Pole Mistakes You Need To Avoid (That Cost A Lot Of Money)YouTubeStart of suggested clipEnd of suggested clipYour area you want to figure out your wind direction your tide your current which way is your boatMoreYour area you want to figure out your wind direction your tide your current which way is your boat going to sit when you're anchored from the stern.
How many amps does a Power-Pole pull?
Powerpole® Connectors - PP120: up to 240 Amps PP120 series Powerpole housings are designed to accommodate up to 1/0 (50 mm²) wires and handle high currents up to 240 amps.
What kind of oil goes in a Power-Pole?
Green Marine ISO-32 Hydraulic Fluid.
Can you run two power poles one pump?
Dual Power-Pole anchors will not deploy at the same time and/or same rate using one pump.
What are the electricity poles called?
A utility pole is a column or post typically made out of wood used to support overhead power lines and various other public utilities, such as electrical cable, fiber optic cable, and related equipment such as transformers and street lights.
How far does a Power-Pole go in the ground?
The typical utility pole runs about 40 feet in length, of which 6 feet is buried in the ground. In urban environments they are commonly spaced about 125 feet apart, while in rural areas the distance is more like 300 feet.
Are power poles electric or hydraulic?
Advantage: Power-Pole Power-Pole will be the most reliable because it is run off of a hydraulic system that is not as susceptible to the elements as an electrical system that the Talon offers.
How many amps is a residential power line?
200-amp service is the current standard for new homes and updated service panels. It can supply all standard electrical needs in a typical family home but may not support a large electric heating system. In large homes, 250-amp or larger service capacity may be needed, particularly if the home has electric heating.
How many amps is a main power line?
The line can carry 500-1000 amps depending on ambient weather conditions. Cooler temperatures, clouds, and wind help lower resistance, so the voltage can push more electrons (amperage) through the conductor matrix.
What is the normal power supply to a house?
Today, virtually all American homes and businesses have access to 120 and 240 V at 60 Hz. Both voltages are available on the three wires (two "hot" legs of opposite phase and one "neutral" leg).
Power Pole Troubleshooting: 3 Problems With Their Solutions
power pole troubleshooting. Power Pole is a handy device that you can use in shallow water. The depth of the water should be under the limit defined by the length of the power pole.
Power Pole Issues? - Marine Electronics - Bass Fishing Forums
It's the Power Pole 8' Pro Sereies II model. I bought it two years ago. And never once had an issue with it. Until I got on the water for the first time and went to deploy from my wireless remote and then I got nothing.
Manuals - Power Pole
POWER-POLE CHARGE MARINE POWER MANAGEMENT STATION THE ALL-IN-ONE, CHARGE ON THE RUN, SMART CHARGER. The CHARGE is the most advanced power management available that does the work of three devices -- a traditional battery charger, a charge-on-the-run an emergency start system--all in one compact unit.
How to raise power pole?
To raise or lower your Power-Pole, press and hold either the UP or
How to tell if a switch is in sleep mode?
Press both UP and DOWN buttons for 3 seconds, LED lights will flash indicating the switch is now in Sleep
Can a dash switch be used with multiple anchors?
With multiple Power-Pole an chors equipped with the C-Monster Control System, the Dash Switch can be
Does the Power Pole anchor come with the Dash Switch?
Your new Power-Pole anchor comes paired to the included Dash Switch and Key Fob remotes . When installing
How does pole changing work?
Pole changing method is a speed control scheme of induction motor. In this scheme, the number of pole pairs is changed by changing the field connection. In induction motor, field winding is wound on the stator while the armature winding is wound on the rotor. Therefore in this scheme, provision for changing the stator winding connection is provided to achieve different number of pole pairs.
How many steps can you change pole pairs?
Since the number of pole pairs can only be changed in steps like from 2 to 4, this scheme provides stepped speed control. Generally, speed control using pole changing method is restricted to two steps.
What is the pole where magnetic field emanates?
This is shown in figure by green colored arrow. As per convention, the pole where from magnetic field emanates is called North Pole and where they enter is called South Pole.
How many poles are there in a coil?
There are four pole faces A, B, C and D. Two coils are wound on pole face A and C in the direction as shown in above figure. Now, the two coils on A and C can be connected in series in two different ways:
When the stator winding is energized by three phase AC source, a rotating magnetic flux is developed in?
When the stator winding is energized by three phase AC source, a rotating magnetic flux is developed in the air gap. This magnetic field rotates with synchronous speed. The synchronous speed is given as
Why is it called constant horse power connection?
Since both coils are connected in parallel, the supply voltage will drop only across single coil. Therefore the flux in the air gap will be halved as compare to constant horse power connection. But the power will remain constant. That is why, it is called constant horse power connection.
Which direction is the current in a coil?
This connection is known as constant-torque connection. In this connection, the direction of current in pole A coil is clockwise while that in pole C coil is anti-clockwise. This is shown in figure below.
How to change stator poles?
The number of stator poles can be changed by the following three methods: 1 Multiple stator windings, 2 Method of consequent poles and 3 Pole amplitude modulation (PAM)
What is the name of the poles that are induced by the magnetic field?
Thus, a magnetic pole of opposite polarity (S pole) is induced. These induced poles are known as Consequent Poles.
How many windings are needed for a 50 hertz motor?
In the multiple stator winding method, two windings are provided on the stator, wounded on two different numbers of poles. One winding is energized at a time. Let us consider that the motor has two windings for 6 and 4 poles. For the frequency of 50 hertz, the synchronous speeds will be 1000 and 1500 revolutions per minute respectively. This method of speed control is less efficient and more costly.
How to raise power pole?
To raise or lower your Power-Pole, press and hold either the UP or
How to tell if a switch is in sleep mode?
Press both UP and DOWN buttons for 3 seconds, LED lights will flash indicating the switch is now in Sleep
Can a dash switch be used with multiple anchors?
With multiple Power-Pole an chors equipped with the C-Monster Control System, the Dash Switch can be
Does the Power Pole anchor come with the Dash Switch?
Your new Power-Pole anchor comes paired to the included Dash Switch and Key Fob remotes . When installing
