How to Anchor Your Toolbox in the Back of a Truck
- Obtain Quality Materials. Start by buying a quality truck box and foam or padding materials. ...
- Get Correct Measurement. Use measuring tape to get the size of the toolbox. ...
- Foam Material. Use the foam material and make sure it has correct measurements. ...
- Anchor Toolbox. Depending on the design of the toolbox, fix it on the truck bed and make sure it is secure. ...
Full Answer
How do you anchor a toolbox to a truck bed?
For metal boxes, find the hardware that comes together with the appliance or use drill bits made for metal. You can buy special j-bolts that are used to anchor the toolbox on the truck bed. These are fixed into pre-drilled holes to keep the toolbox in place.
How do you put a box on top of a truck?
Measure the width of the box, and then cut rubber or foam padding to place on your truck rails to protect from scratching. If you have a bed liner in place, you can skip this step. Enter the rubber j-bolt plugs into the pre-drilled holes, if they’re not already there. Then, place the box on top of the padding or bed liner.
How do you secure a toolbox on a truck?
A toolbox can be anchored on a rig's bed to add secure space for storing equipment. Safe, lockable toolboxes come in different styles and sizes and can be made from different materials such as steel, aluminum, and plastic. Mounted it to the truck will protect against theft and keep it from sliding around.
How to fix a toolbox that won't stay in the truck bed?
Measure the upper side of the new or existing toolbox and buy foam material with similar measurements. This helps to prevent wear and tear to both the truck bed and the box. It is advisable to buy screws or bolts and nuts depending on what is required to fix the toolbox in place. Most of these supplies can be bought from a nearby hardware store.
How to protect truck rails from scratching?
Wherever you choose, just make sure you can easily open the tool box. Measure the width of the box, and then cut rubber or foam padding to place on your truck rails to protect from scratching. If you have a bed liner in place, you can skip this step.
Do you need to drill holes in truck bed rails to install toolbox?
Most toolboxes require only simple hand tools you probably have in your truck right now. Minor drilling may be required to install your toolbox – a few simple holes through the inside of the bed rails may be needed to securely mount your box.
What type of fastener do you use to attach a toolbox?
It’s a lot easier to mount a plastic container, but metal toolboxes are heavy to handle. You can use J-bolt-type fasteners and tool belts to attach the toolbox accurately.
Why is it important to have a toolbox in your truck?
Safety is the priority of having a toolbox for your truck. It can protect all your important and expensive tools from being lost. Sometimes keeping tools in the truck’s bed will become damaged, rusty, unuseful, and stolen.
Why are toolboxes so popular?
Toolboxes have now become very famous all over the world. Many reasons are running behind its getting popular. All the reasons are mainly the benefits that a toolbox can provide. Toolboxes are very necessary not only for the benefits but for our expectations. We all want to keep the essential tools safe and nearby. In bad weather, this box keeps safe all your cargo and gears, which increases the durability of the tools uses. But the main confusion is between do we need to drill for installing the toolbox in the truck or don’t. And the answer is, of course, you can install it without drilling.
Is it safe to keep tools in a toolbox?
Sometimes there remains less space in the garage or in our house to store any important or heavy tools. Also, you may feel unsafe to keep them inside the house, but a toolbox has enough space to keep them safe. A well-designed toolbox can carry a good amount of heavy equipment.
Can you install a toolbox without measuring?
You have to use measuring tapes to get the box’s exact width, length, and height. Without proper measurement, you can’t install the toolbox correctly.
Detailed User Guide To Install A Truck Tool Box
We hope you love the products we recommend! Just so you know, we may collect a share of sales or other compensation from the links on this page. Thank you if you use our links, we really appreciate it!
How To Install A Truck Tool Box?
Follow the below steps to follow for the installation of a truck tool box.
Truck Toolbox Hacks
If your mind is unable to conclude, which toolbox to buy, you may either posted it in the comment section, or ask at an auto parts store, but don’t end up buying an appropriate toolbox.
What to do after tightening tool box?
After tightening the tool box, it is very important for you to cross-check your work. You need to be sure that everything is in its rightful place before calling it a day. You can open the lid to confirm that it opens properly without any hindrance.
Why are tool boxes made of aluminum?
More often than not, tool boxes are made of aluminum because of its light weight, durability and non-corrosive nature. Older boxes are made with steel coated with corrosion resistant material and they are stronger than aluminum. The downside to steel boxes is that they are heavy and expensive.
Where are the holes in a truck?
You should look for holes in your truck’s cargo bay. In most cases, these holes are covered with rubber plugs and can be found on the bottom surface. Remove these rubber plugs and connect the box properly. You should endeavor to open the cover so that matching holes on the box with that of the truck will be easier.
Do you need a tool box for a truck?
In order to keep your tools properly, you need a truck tool box. Your tools require adequate security so that they will always be there for you when you need them. It also need to be protected from harsh weather so that It will be lasting. As a result of this, you should know the best way to secure truck tool box in order to achieve comfort in its ...
Do you put foam padding on a tool box?
Hence, the rubber foam padding should be placed before securing your tool box. You should use the measuring tape to take the length and breadth measurement of the box before placing the foam padding. However, if your truck has a bed liner, you may skip this step because the liner will protect the surface of the truck.
