how do you apply behr advanced deck over

How to Apply Advanced DeckOver ® Coating

Full Answer

See more

How do I prepare for Behr DeckOver?

0:000:53How To Prepare a Deck to Use BEHR PREMIUM DeckOver® - YouTubeYouTubeStart of suggested clipEnd of suggested clipHours before coating pre-fill any cracks and splinters. And allow to dry before applying theMoreHours before coating pre-fill any cracks and splinters. And allow to dry before applying the required two coats of deck. Over. Please see product label or bear.com.

Do you need to prime before using Behr deck over?

Before applying DECKOVER coating to a wood surface, be sure to use BEHR® PREMIUM PREP PRODUCTS. Whether your existing wood surface is uncoated or coated, the BEHR PREMIUM PREP PRODUCTS will allow the newly applied coating to fully adhere to the wood surface and will ensure a longer lasting, more durable finish.

How long does it take for Behr advanced DeckOver to dry?

Dries to touch in 4 hours. Wait 24-48 hours before light foot traffic. 72 hours to full cure. Additional dry time may be needed in cooler temperatures and higher humidity.

Do you need primer with DeckOver?

Should I prime my deck before painting? Great news! Behr does not recommend applying a primer before using Advance DeckOver.

Will Behr DeckOver peel?

– After one Winter and the Deckover was peeling heavily. We prepped according to manufacturer directions, so we know that was not the problem. In general, we have found that all Behr stains have a tendency to peel, especially after a Winter in a cold-weather state.

How long does DeckOver last?

If the DECKOVER coating is applied according to label directions to a properly prepared, sound wood or concrete substrate, the film can be expected to last as long as a high quality Solid Color Wood Stain. BEHR Solid Color Wood Stains last 5 to 10 years on horizontal surfaces and 15 to 25 years on vertical surfaces.

How long does Deckover have to dry between coats?

Dry TimeBlank space if empty. 4-6 hours before recoat. Dries to touch in 4 hours. Wait 24-48 hours before light foot traffic. 72 hours to full cure.

How long does Behr Deckover need to dry before rain?

The surface must be clean and completely dry before coating. Avoid painting in conditions of low temperature and high humidity (or presence of moisture, condensation, dew, etc.). Do not paint if rain is expected within 24 hours.

What if it rains after I paint my deck?

If rain is forecasted, it's worth holding off treating your deck until you know it's going to be dry for a few days. Stains and oils penetrate wood best when it's cool and dry. If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain.

How do I clean my deck with Behr Deckover?

0:120:56BEHR Premium DECKOVER™ Cleaner - YouTubeYouTubeStart of suggested clipEnd of suggested clipLet the cleaner stand for 10 to 20 minutes then scrub vigorously rinse the surface thoroughly withMoreLet the cleaner stand for 10 to 20 minutes then scrub vigorously rinse the surface thoroughly with fresh water while scrubbing to properly remove all remaining residue.

What can I use instead of Behr deck over?

Overall, Cabot Deck Correct gets better coverage for the price than Behr does. A gallon of Cabot Deck 17400 series covered 250 to 350 square feet of smooth deck surfaces. You can only get this coverage with a single coat. A double coat will cover 75 to 100 square feet of deck wood.

Can I paint over old deck paint?

You don't need to remove old paint before painting a deck. You only need to remove old paint if it's blistering, cracking, or peeling. Otherwise, the new layer will bubble and peel soon after. If the old paint is still in good shape, paint over it.

Can you use Behr Deckover on new wood?

Hi Lance, Yes, the new wood still needs to be prepped according to label instructions. We do not recommend pressure washing, but definitely clean the new pressure treated wood before applying DECKOVER. Our No. 63 All-in-one Wood Cleaner works great for this!

How do you apply Deckover paint?

0:592:49DIY Deck Makeover | Using BEHR Deckover - YouTubeYouTubeStart of suggested clipEnd of suggested clipI started by using a brush to paint in between the fence boards. I recommend doing the detail. WorkMoreI started by using a brush to paint in between the fence boards. I recommend doing the detail. Work first and then going over the big surfaces. With a roller.

How long before you can walk on Behr Deckover?

Dries to touch in 4 hours. Wait 24-48 hours before light foot traffic. 72 hours to full cure. Additional dry time may be needed in cooler temperatures and higher humidity.

Can I paint over Behr deck over?

After removing the loose areas and cleaning with Behr All-in-One Wood Cleaner, the surface should dry for at least 24 hours in dry weather before recoating. If there are DeckOver remnants left, they can be topcoated.

How long is Behr Process Corporation warranty?

WARRANTY. For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications.

How long does it take for a deckover coating to dry?

Apply ADVANCED DECKOVER Coating only on a completely dry surface. After cleaning with water and appropriate cleaning products, allow a minimum of 24 hours of dry time. If you live in a high-moisture region, allow for a longer dry time.

How long is a Behr warranty good for?

For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. In the event this product proves to be defective within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

What is the best product to clean and etch uncoated concrete?

Use an etcher product to clean and etch uncoated concrete or NO. 990 Concrete & Masonry Degreaser & Cleaner on sound coated surfaces prior to coating.

What is NO 63 for deck over?

63) to remove all loose wood fibers, peeling paint/stain or deteriorated coatings prior to application of DeckOver. On new wood, use NO. 63 to remove mill glaze and open the pores of the wood. Rinse thoroughly and allow to dry before coating.

What must surfaces be clean and dry before applying?

All surfaces must be clean, sound, dry and free of any dirt, oil, and grease before application.

Do you have to clean a deck before putting it on?

Your deck surface must be clean and sound. Properly prepare your deck before application.

What is Behr deck over?

Behr Deck Over is a thick deck coating that has a history of peeling.

Why is Behr Deck Over failing?

Behr Deck Over is failing on wood decks because it's not sticking well to the wood. I knew the Deck Over product would FAIL at some point because it was a film-forming product meant to completely cover the wood much like a clown applies makeup to completely hide their face/skin. ALL FILM FORMERS eventually FAIL.

Does Behr Deck Over stick to wood?

Behr Deck Over will not stick well to dirty decking. My guess is the reason there are so many failures of this product is that the homeowners are not applying the product to clean wood.

Behr Deckover Review Updated for 2022

Since the article was first originally published, we have had many comments from consumers who have used the Deckover and have had a terrible experience with peeling and failure. If you have used the Behr Deckover, please upload and post pictures of your exterior wood or deck with the Deckover on it.

Behr Advanced DeckOver Home Depot

Where To Buy: Home Depot Cost: $38 per Gallon Stain Type: Acrylic Solid Stain – Water Based Available Colors: 54 Custom colors Application Temperature: 45-95 F Coats Required: 2 Coats. Coverage Per Gallon: 75 sq. ft per gallon.

Who designed the Behr coating?

The coating was designed by the Behr chemists to both fill and bridge over large cracks you see in neglected wood decks.

Why does my Behr deck over peel?

Treated deck lumber gets wet and dries out each time it rains. This back and forth movement of the wood will cause the Behr Deck Over to peel at some point just as you see in the photo above.

What are the biggest concerns when undertaking a deck project and protecting a hefty investment?

From Tim: One of the biggest concerns when undertaking a deck project and protecting a hefty investment is the durability of any product that is designed and used to protect it.

How old should new wood be before applying?

New wood can be almost as big a problem as wood aged 20 years or more. Old school thinking, that I still adhere to, is that new wood should age six months before ANY product is applied.

Is it necessary to protect a deck from water erosion?

Protecting your deck from water erosion is a necessity.

Can I pressure wash deck furniture?

I have pressure washed, without chemical, once and not one chip released from the surface. All types of deck furniture seem to be fine on this product, too; metal, wood, plastic, heavy, light. Anything I’ve thrown at it has been fine.

Can you pressure wash a deck?

You can also use some chemical and brush the surface if you don’t have a huge surface to do. I chose to just pressure wash and got great results that brought the deck to “like new” condition.

Does weather affect Deckover?

The severity of the weather in your area may affect the success of the Deckover product.

Is it a good idea to go back to our original post on preparing and applying the product?

To fully appreciate this product and how well it has performed, it might be a good idea to go back to our original post on preparing and applying the product.