Applying the First Coat Download Article
- 1 Stir the osmo polyx oil. ...
- 2 Dip a floor brush into the osmo polyx oil and dab it over the wood. ...
- 3 Scrub the oil into the wood using the floor brush. ...
- 4 Rub the oil against the grain. ...
- 5 Work a small area of the wood at a time. ...
- 6 Store the osmo polyx oil and floor brush. ...
How do you apply Osmo varnish?
Apply thinly and evenly along the wood grain with the Osmo Natural Bristle Brush or the Osmo Microfibre Roller, and spread well. Allow for good ventilation whilst drying. Apply a second coat as before. This should be applied onto a clean and dry surface.
How do you apply Osmo POLYX oil to wood?
Applying the First Coat Stir the osmo polyx oil. Dip a floor brush into the osmo polyx oil and dab it over the wood. Scrub the oil into the wood using the floor brush. Rub the oil against the grain. Work a small area of the wood at a time. Store the osmo polyx oil and floor brush.
How do you use Osmo floorxcenter?
Spread evenly with the Osmo Scraper. Wait approx. 30-60 minutes, until the oil has penetrated the wood surface. Buff the oil into the surface using the Osmo FloorXcenter and a green pad. Directly after repeat these steps with a second coat. Using a white pad, spread the finish evenly across the surface area.
How do you test Osmo Hardwax oil?
SECOND COAT: OSMO Hardwax Oil requires two coats. The second coat should be applied after the first coat is thoroughly dry. Most people wait until the next day. The test is to rub a small section with fine steel wool or a green Scotchbrite pad. If the finish produces a white powder, it's dry enough to recoat.
How to use Osmo oil stain?
18%). Osmo Oil Stain is ready to use, please do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Os mo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is, among other things, influenced by the wood‘s natural characteristics. Therefore, a trial application is always required, especially for unfamiliar surfaces.
What is an Osmo floor brush?
Osmo Floor Brushes are specially designed for the application of Osmo Polyx-Oil (s) and Wood Wax Finishes. Made from 100% natural bristles, these high-quality made in Germany brushes are designed specifically for the quick and efficient application of Osmo products. Brush handle has locking connection for Osmo Telescopic Handle.
How long does it take for Osmo to dry?
Allow to dry for approx. 12 hours with good ventilation. Intensively coloured: If a stronger colour intensity is desired, apply very thinly and evenly to the clean and dry wood along the wood grain with Osmo Microfibre Roller or Osmo Floor Brush 150 mm, and spread well.
What brush is used for Osmo?
Microfibre Roller and Natural Bristle Brush set for the application of Osmo Finishes.
What is an Osmo floor buffing unit?
Osmo FloorXcenter is a lightweight and easy to manage floor buffing unit which has a soap dispenser that enables the user to dispense the optimal amount of a pre-loaded cleaner, such as a mixture of Osmo Intensive Cleaner, or Osmo Wash and Care for easy floor maintenance. Can be used to clean, resurface as well as colour and refinish floors with Osmo wood finishes.
How to protect wood floors without transitions?
Color and protect wooden floors easily without visible transitions. Applying a single coat of Oil Stain will create a transparent look showing the wood’s natural grain, whilst an optional second coat will produce an opaque color. A clear final coat of Osmo Polyx®-Oil is a must to protect pigmented finishes from wearing the color.
How to use osmo polyx oil on wood?
Dip a floor brush into the osmo polyx oil and dab it over the wood. You can use an osmo floor brush or a floor brush you purchased from a hardware store. Dip the brush into the oil in your paint tray and dab it 2 to 3 times over the wood you're finishing. Leave 4 to 6 inches (10 to 15 cm) of space between each dab of oil.
How to store osmo polyx oil?
Store the osmo polyx oil and floor brush. Wrap the tray with the osmo polyx oil and the floor brush in an airtight plastic bag. This will prevent the oil from drying out as the wood dries.
How to make a clear oil paint?
Stir the osmo polyx oil. Open your can of hardwax oil and use a long wooden paint stick to stir the oil. Keep stirring until the oil that's separated is emulsified. You shouldn't see any clear oil floating to the top. Pour some of the oil into your paint tray.
How to protect wood from stains?
To protect the wood and give it a little shine, seal it with osmo polyx oil. This oil is easy to apply and it will harden as it cures. Smooth and clean the wood before you scrub the oil into it. Then dry the first coat completely before you apply another coat of oil. Give the oil a chance to cure before you install the wood or put down rugs.
How to clean paint from a brush?
Clean the brush and paint tray with paint thinner. Once you've finished the second coat, rub paint thinner through the bristles of the brush. This will prevent the oil from drying in the brush. Then, use the paint thinner to clean out the paint tray.
How to get oil out of wood?
Rub the oil against the grain. Continue to use the floor brush to scrub the oil into the wood, but turn the brush so you're going with the grain. Scrub until the brush is dry. Avoid lifting the brush up off of the wood and back down because this will leave noticeable streaks.
How to get streaks out of wood?
Avoid lifting the brush up off of the wood and back down because this will leave noticeable streaks. Instead, keep stroking and rubbing the brush across the wood.
