how do you apply water based varathane floor finish

How do you apply water based polyurethane without streaks?

• Sand your surface in successively finer grits down to 220 grit with a random orbital sander.
• Spray the surface with water and allow it to dry.
• Sand your surface to 220 grit with a random orbital sander, to remove the raised grain.

Full Answer

How do you apply Varathane polyurethane to hardwood floors?

It’s easy to apply Varathane polyurethane to your floors with a few simple steps. First, make sure you clean your floor thoroughly before applying. Sweep, vacuum, and then mop the floor with a damp cloth. Next, use fine-grit sandpaper to lightly sand the floor. This will help the polyurethane adhere better.

Can you use Varathane on wood furniture?

This is because Varathane gives off fumes when wet, which can be dangerous to inhale. Once you have found the area to work on your furniture, lay down a drop cloth to catch the sawdust and any drips from the Varathane so that you do not have to clean up the ground or floor. Step 2. Sanding

How do you apply Varathane?

Available in gloss, semi-gloss and matte finishes, Varathane's self-leveling formula makes it easy to apply, eliminates brush strokes and lasts for years. Applying Varathane requires using only a few tools and following a simple procedure. Vacuum and use a tack cloth to remove all debris and dust from the area where you plan to apply the Varathane.

Can You sand after applying Varathane?

One advantage of sanding is that you remove any particles that might’ve gotten stuck in the Varathane before it dried. If the bumps are significant, use a sharp razor blade over the area, then sand again. Step 5. Second Coat Once the surface is smooth, you can apply a second coat.