Building the Fountain
- Step 1: Seal Off the Drainage Holes Place the 19-1/4-inch glazed ceramic outdoor pot facedown. ...
- Step 2: Install the Water Pump
- Step 3: Thread the Pump's Cord
- Step 4: Seal Off the Power Cord
- Step 5: Set the Pot and Pump
- Step 6: Fill the Fountain Pot
- Step 7: Fill the Fountain Project Variations ...
Full Answer
How do I build a water fountain?
Assemble your fountain parts. [3] If building below ground, dig a hole that will fit the water reservoir snugly. Be sure to leave 2 inches (5 cm) of drainage gravel beneath the reservoir. If you wish to hide the power cord, you will need to dig a separate trench out from the reservoir hole. Fit the pump in the reservoir before adding water.
How do you adjust the sound of a fountain?
Adjust water flow. Turn on water pump (adjusting pressure if needed) and arrange the fountain's design elements to ensure the water returns to the reservoir. The look and sound of the fountain can also be adjusted this way by tweaking the angle of the fountainhead and any obstacles in the path of the water flow.
How do I choose the right fountain for my home?
Look around to find a fountain in the appropriate scale for your setting. Think about materials -- stone, slate, bamboo, granite -- that will coordinate with the rest of your decor. As you choose the location for your fountain, keep in mind that a fountain needs a power source.
How do you seal a hole in a water fountain?
Apply the silicone caulk to the sides of every plug, placing the smaller end into the hole and pushing firmly. Leave about 1/4 inch of each plug extending out from the holes. Apply sealant around the exposed area of each plug. Want more DIY garden ideas featuring a DIY water fountain?
How do you set up a fountain?
0:343:37How to Install a Landscape Fountain Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake the fountain visible from a regularly used window or patio door to provide views and enjoymentMoreMake the fountain visible from a regularly used window or patio door to provide views and enjoyment from both inside and outside your home set the aqua basin in the desired. Location.
How do you assemble a 3 tier water fountain?
0:061:48How to Assemble a Tiered Water Feature - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse the guides to align the basin correctly and simply screw it. In. Now feed the pumps power cableMoreUse the guides to align the basin correctly and simply screw it. In. Now feed the pumps power cable through the central pipe. Place the next central pillar section over the pump so that it houses. It.
How do you hook up an outdoor water fountain?
How to Install an Outdoor FountainStep One: Choose Your Fountain Location. ... Step Two: Select Your Fountain. ... Step Three: Mark the Area for Excavation. ... Step Four: Dig the Hole. ... Step Five: Level the Basin. ... Step Six: Connect the Pump and Plumbing. ... Step Seven: Add Lighting. ... Step Eight: Add Decorative Gravel.More items...•
What are the parts of a fountain?
These parts include the pump, the water conduit (usually plastic tubing) and the water basin. Anything else you see in a fountain is there for the purpose of disguising these parts or enhancing the overall design. When you purchase your water fountain, the necessary parts are usually included.
How do you assemble a wall fountain?
0:051:15Verona Wall Fountain Installation Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd insert two screws or nails into the wall where you want to hang your water feature. Making sureMoreAnd insert two screws or nails into the wall where you want to hang your water feature. Making sure they're level carefully hang the fountain and fill it with enough water to fully submerge the pump.
How do you set up a 2 tier fountain?
0:311:28How to Build a Two-Tier Fountain - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace a smaller ceramic pot on top of the saucer with the pump tube coming through the drain holeMorePlace a smaller ceramic pot on top of the saucer with the pump tube coming through the drain hole install the nozzle of your choice on the end of the tube. Rinse.
Where does the pump go in a water fountain?
The pump goes in the reservoir, or, in a two-pump fountain, in the reservoir and the top basin.
Do you need a water line for a fountain?
Most outdoor fountains are connected to a home's water supply. These fountains have a continuous supply of water so as long as the water is turned on, they won't go dry. There are some smaller fountains that can be filled using a water hose without the need for a permanent connection.
How does an outdoor water fountain work?
The pump forces water upwards to create a falling effect into a lower basin. The pump uses water pressure and tubes to force the water back into the reservoir to start the cycle over again. The number of reservoirs and pumps in a fountain can vary, with large outdoor fountains commonly having multiple basins.
What do you need for a water fountain?
StepsYour fountain will be composed of three main elements: a water reservoir, a water pump and a design feature.The location must have easy access to an electrical outlet or the ability to run an unobtrusive extension cord to power the pump. ... The style is up to you.
What is the base of a fountain?
The base is the support for the fountain; it keeps it from sinking into the ground, tilting, and possibly being damaged. A strong, sturdy, and level base is a necessity of any outdoor garden fountain installation.
What are the different types of garden fountain?
Here are 5 different types of garden fountains:Tiered Fountain. Tiered fountains are very popular and have been used in gardens for years. ... Disappearing Fountain. This water feature is also known as a pondless fountain. ... Japanese Fountain. Every Japanese garden has a water fountain. ... Wall Fountain. ... Self-Contained Fountain.
How does a wall water fountain work?
Working of an Indoor Water Wall Fountain There is a water pump installed at the base where the reservoir is. Its mechanism let the water to go up the water wall with the help of the pump. The pump take the water from the reservoir to the top of the water wall which creates a cascading effect.
How do you build a wall mounted water feature?
0:4013:24DIY: Making A Wall Hanging Water Feature - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can get one yo big you can get one even that's more we've gone for an intermediate size. We'veMoreYou can get one yo big you can get one even that's more we've gone for an intermediate size. We've also got a few little 3-inch nails. And we've got a piece of masonite. Which is quite flexible.
How does a water wall work?
Water walls can be purchased from retail providers or made at home. A wall of water is basically a heavy piece of plastic that is sectioned into cells that you fill with water. This creates the same effect as a greenhouse and gives off heat to protect from cool air and freezes.
How do you assemble a solar fountain pump?
0:051:51How to Assemble a Solar Water Feature - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake the pumps power cable and plug it into the receiver. We're nearly there but don't forget theMoreTake the pumps power cable and plug it into the receiver. We're nearly there but don't forget the all-important nozzle it simply clicks onto the top side of the fountain. Now place it onto the basin.
How do you fix a broken fountain pump?
0:393:15Fountain pump quick fix. Re-purpose, Re-use - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo all I did was I took everybody's favorite Gorilla Glue I took a toothpick. And I just got aMoreSo all I did was I took everybody's favorite Gorilla Glue I took a toothpick. And I just got a little bit on the toothpick. And I put it down the hole of the ferrite.
Why is my water fountain not working?
Clogs are the number one reason drinking fountains don't work. Look at the bubbler (where the water comes out of) and see if there are any obstructions. Sometimes dirt or other gunk gets stuck making drinking from the fountain impossible. Use a sharp stick to see if the system has been clogged.
How do you put water in a tabletop fountain?
A tabletop water fountain is essentially a submersible pump at the bottom of a watertight container. Glass or ceramic bowls make ideal containers, as do old cooking pots. Set the pump to bubble gently along the surface or add longer tubing to spray water up and trickle back down.
Before you begin
Every manufacturer of the fountains we sell at Garden-Fountains.com will come with their own detailed instruction sheet. Most will have schematic drawings, and include all the parts you’ll need. Please take the time to review everything carefully, before you begin.
Instructional videos by fountain type
Two-tier fountains, such as the Williamsburg Pineapple 2 Tier Fountain. This video gives you the general steps that apply to most any multi-tier fountain.
How to personalize an indoor fountain?
You can also choose to personalize your indoor fountain by purchasing another bowl (if you want something bigger, or smaller, or something that matches the color of your interior).
What is needed to make a tabletop fountain?
A small pump circulates the water that spouts onto the upper sculpture. There's a hidden container that hides the water tight bowl, the submersible pump, and the device that covers this assembly underneath. Rocks and marbles also adds a way of camouflaging this mechanism. You will also need a tube that fits the pump and a copper elbow that pushes the water downwards. With these things in check, it's time to put everything together!
How to hide a pump in a bowl?
Hide the pump inside the bowl by using the rocks. This can be done easily by making a den with an upside-down clay ceramic or a plastic container with a hole in the bottom. Use the wide ricks in creating a base for the pile of rocks for the camouflage. An insert material is required to contain your water feature.
Can you remove rocks from a water feature?
An insert material is required to contain your water feature. Rocks are okay; these can be easily removed and washed when the time for cleaning has come. Get your pump plugged in an electrical outlet to set it to work. Change its speed settings as you prefer.
Can you buy an indoor fountain kit?
At best, purchase an indoor fountain kit from a reliable source. Here at Indoor Fountain Pros, we bring you a great variety of water features for your home. These come complete in parts and manual, so that you’ll have no problem when it comes to assembly. Enjoy your indoor fountain without the hassle by buying premium products from the best indoor fountain curators around! Check out the rest of our store and discover fountain styles that fits your home.
How to make a water fountain?
An example of a very simple fountain can be made with a 10 gallon (38 liter) rubber feed container that is 8 inches (20 cm) deep or larger (available at most farm supply stores), a length of hose, a water pump and a pile of rocks . Dig a hole 1 inch deeper than the container, add 1 inch of sand to help level to container. Put the pump into the container and connect a length of hose about 2 feet (0.6 m) (60 cm) in length to the pump. Pile rocks around the tu bing inside the container, leaving the pump exposed. Make a small mountain tapering towards the center. Use caulk if you find it hard to keep the rocks in place. Cut the tubing flush with the top rocks. Fill the container with water, adjust the speed of the pump and enjoy!
How to adjust water flow in a fountain?
Adjust water flow. Turn on water pump (adjusting pressure if needed) and arrange the fountain's design elements to ensure the water returns to the reservoir. The look and sound of the fountain can also be adjusted this way by tweaking the angle of the fountainhead and any obstacles in the path of the water flow.
What is the best way to deliver water to a fountain?
Pipes and tubing. The pipes or tubing will deliver the water from the reservoir to the fountainhead. Many water pumps will come with tubing, but if not, or if you need something specific for your design (such as copper pipe), you will need to purchase it separately. Rubber tubing will be the easiest to work with.
What are the elements of a fountain?
Your fountain will be composed of three main elements: a water reservoir, a water pump and a design feature. The location must have easy access to an electrical outlet or the ability to run an unobtrusive extension cord to power the pump. ...
What outlet do I plug a pump into?
Always plug the pump into a GFI (ground fault interrupt) outlet. If you do not have one, install one or have a qualified electrician install one.
How to make a babbling brook sound?
For example, if your fountainhead is water running out of a tipped pail, try building a small stack of rocks inside your reservoir to get a babbling brook sound.
How to hide a reservoir?
To hide unsightly reservoir borders, tubing, or other structural elements, try planting ground cover plants that grow in shallow dirt, caulking rocks to the offending area, or stacking landscaping bricks or other items that fit with the theme of your fountain to hide the area.