Curtain Making with Curtain tape (header tape / Ruflette)
- Next, we open out our almost curtain and lay it out flat with the face fabric down.
- Fold the top down so that the crease is level with the pins.
- Work your way along the crease pinning all the layers of fabric together.
- Taking your curtain tape, tuck 1.5 to 2″ between the layers at one end and pin in place.
Full Answer
How do you make header tape curtains?
Header tape is a stiff fabric band sewn on the back of the fabric along the top of the curtain panel. The tape is gathered into pleats evenly across the panel; it’s made with pleat pockets already in place so the gathering task is quick and precise. 1 Cut the fabric into panels the finished length you want the curtains to be plus 4 inches.
How do you attach header tape to a panel?
Turn under 1/2 inch along the top edge of the panel. Place the header tape on the back of the panel so the upper edge of the tape is 1/4 inch down from the fabric fold and the tape covers the raw edge of the fabric. Pin the tape in place across the width of the panel, allowing an extra inch of tape on each side.
How do you sew a curtain panel with tape?
Sew across the width of the panel with the back of the panel and the tape facing up, simply stitching on the lines. Machine stitch the lower edge of the header tape to the curtain panel, then sew the folded-under ends of the tape along the sides of the panel.
How do you hang curtains from grommets?
Get eyelet heading tape if you want to hang the curtains from grommets. You've probably seen curtains that have holes in the top for the curtain rod to slide through. If you want to attach this type of heading tape, just keep in mind that you'll need to cut the circles of fabric out from the middle of the grommets. [3]
How to put header tape on a panel?
How to sew a curtain with tape?
About this website
How do you attach curtain tape to a header?
1:404:33How to Make Pencil Pleat Curtains - YouTubeYouTubeStart of suggested clipEnd of suggested clipPin across the width of the panel. Cut off the tape on the other end leaving enough to fold. Under.MorePin across the width of the panel. Cut off the tape on the other end leaving enough to fold. Under. So we're on the top bottom and sides of the tape.
How do you use heading tape?
0:003:08Sew-On Tapes - YouTubeYouTubeStart of suggested clipEnd of suggested clipThese are so on so you sew them to the heading of your drapery or dust ruffle or valance. And thenMoreThese are so on so you sew them to the heading of your drapery or dust ruffle or valance. And then you pull up the cords. And when you do you get gathering.
How do you attach pinch pleat heading tape?
1:474:54Triple Pinch Pleat Tape - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd start with a pin right on the edge and then let the tape fall out as it may you also can takeMoreAnd start with a pin right on the edge and then let the tape fall out as it may you also can take the spaces. And fold the tape over on itself a little bit if you want to make the tape fit.
What is header tape for curtains?
Header tape is a stiff fabric band sewn on the back of the fabric along the top of the curtain panel. The tape is gathered into pleats evenly across the panel; it's made with pleat pockets already in place so the gathering task is quick and precise.
Which way up does curtain tape go?
Ensure that the tape is the correct way up - yellow line at the bottom, and that the hook pockets are facing you. Machine the tape to the curtain along the turquoise sewing lines, leaving 3mm between the top of the tape and the top of the curtain. The top and bottom rows must be stitched in the same direction.
How deep should curtain tape be?
The standard 3″/76mm depth has three woven pockets for variable hook position and you pull the strings at the back to create the gather. Deeper and shorter tapes are also available depending on the length and weight of your curtains.
How do you use curtain tape and hooks?
3:304:30How to Hang Pencil Pleat Curtains | Step by Step Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd twist them in the right way around like that and you simply need to work across the tape. EveryMoreAnd twist them in the right way around like that and you simply need to work across the tape. Every 5 or 4 so evenly spread to these 15 hooks spread all the way across.
What is the difference between French pleat and pinch pleat?
Two prong pleats are good for showing off a patterned fabric and using more drapery rings. Grommets are casual and more modern. The metal of the grommet accents other aspects of your decor.
How do you pleat the top of curtains?
4:236:19How to make pinch pleat curtains - YouTubeYouTubeStart of suggested clipEnd of suggested clipFold the top edge of the curtain down about ten centimeters. All the width of your pleat tape. PressMoreFold the top edge of the curtain down about ten centimeters. All the width of your pleat tape. Press fold it down again and press.
How much curtain header tape do I need?
Standard Curtain Heading - 3" Or 6" Deep Tape For the best results for this type of curtain heading aim for a minimum fullness of 2.25 times the rail width. This will give an adequate amount of fullness to the pencil pleats, across the full width of the window when the curtains are in the closed position.
How do you make lined curtains with header tape?
3:5218:08Sewing a simple lined curtain by Debbie Shore - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo remember again you're going to measure the length that you want and add five inches to thatMoreSo remember again you're going to measure the length that you want and add five inches to that length you're going to measure the width that you want and add seven inches to the width.
How do you sew on drapery tape?
Stitching the Tape to the Curtain. Straight stitch along the top and bottom of the tape. Take the material over to your sewing machine and use a simple straight stitch to sew across the top of the tape so it's attached to the liner. Then, sew straight stitches along the bottom of the tape so it's completely secure.
How do you attach Rufflette tape?
2:054:14How to Use Pencil Pleat Tape - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhen you pull up the tape it forms these beautiful little pleats on the back it has a loopy texture.MoreWhen you pull up the tape it forms these beautiful little pleats on the back it has a loopy texture. And that's going to stick to the hook tape. That we install in the window.
How do you make lined curtains with header tape?
3:5218:08Sewing a simple lined curtain by Debbie Shore - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo remember again you're going to measure the length that you want and add five inches to thatMoreSo remember again you're going to measure the length that you want and add five inches to that length you're going to measure the width that you want and add seven inches to the width.
How to put header tape on a panel?
Turn under 1/2 inch along the top edge of the panel. Place the header tape on the back of the panel so the upper edge of the tape is 1/4 inch down from the fabric fold and the tape covers the raw edge of the fabric. Pin the tape in place across the width of the panel, allowing an extra inch of tape on each side.
How to sew a curtain with tape?
Turn under the extra inch of tape at each end to conceal the raw edges. Pin the tape edges just inside the hemmed edges of the panel. Machine stitch the upper edge of the header tape, sewing through the tape and the folded panel fabric. The tape has a woven mark or a colored mark along the edges to indicate stitching lines. Sew across the width of the panel with the back of the panel and the tape facing up, simply stitching on the lines. Machine stitch the lower edge of the header tape to the curtain panel, then sew the folded-under ends of the tape along the sides of the panel.
How far in from edge of curtain tape?
Sew along the top of the curtain tape about quarter inch in from the edge.
Can you add curtain tape to curtains?
Adding the curtain tape to your almost curtains is relatively simple. In fact, as I mentioned to Laura Here, it is the same process that we use in our guide – How to Shorten Curtains the easy way.
How to put tape on curtain liner?
Once you've positioned the tape at the top of your curtain liner, insert sewing pins vertically through the middle of the tape. Leave about 2 inches (5.1 cm) between each pin.
How to attach a curtain liner to a curtain?
Feed hooks through the lining tape and attach the liner to the curtain tape. Take metal or plastic curtain hooks and insert them through the loops of the lining tape. Use 1 hook about every 4 loops across the tape. Then, lay the lining onto the back of your curtain and hook it onto the curtain's tape.
How to sew a tape liner?
1. Straight stitch along the top and bottom of the tape. Take the material over to your sewing machine and use a simple straight stitch to sew across the top of the tape so it's attached to the liner. Then, sew straight stitches along the bottom of the tape so it's completely secure.
How to pull strings from curtains?
Pull the strings 1 1⁄2 in (3.8 cm) away from each end and tuck the ends under. Tug on the exposed strings that are at 1 end of the lining tape so you'll be able to grasp them and gather the curtains later. Leave the strings free and tuck about 1 1⁄4 inches (3.2 cm) of the tape under itself at that end.
How to make a ruffle on a curtain?
Pull the strings at the ends to create a ruffle that matches your curtain. It can help to hold the liner up to your hanging curtain so you can compare how gathered the fabric is. Once your liner is as ruffled as you like, tie the strings at each end into a loose knot and push them under the lining tape.
How to save time sewing tape?
Tip: You'll save time by pushing the pins through the center of the tape , not the top since you won't have to remove pins as you sew.
What are the raw edges of tape?
The raw edges of the tape have a few exposed strings that you'll use to gather the curtain.
How to put header tape on a panel?
Turn under 1/2 inch along the top edge of the panel. Place the header tape on the back of the panel so the upper edge of the tape is 1/4 inch down from the fabric fold and the tape covers the raw edge of the fabric. Pin the tape in place across the width of the panel, allowing an extra inch of tape on each side.
How to sew a curtain with tape?
Turn under the extra inch of tape at each end to conceal the raw edges. Pin the tape edges just inside the hemmed edges of the panel. Machine stitch the upper edge of the header tape, sewing through the tape and the folded panel fabric. The tape has a woven mark or a colored mark along the edges to indicate stitching lines. Sew across the width of the panel with the back of the panel and the tape facing up, simply stitching on the lines. Machine stitch the lower edge of the header tape to the curtain panel, then sew the folded-under ends of the tape along the sides of the panel.
